• Journal of the Korea Concrete Institute
• /
• v.21 no.4
• /
• pp.513-521
• /
• 2009

Recently, the externally prestressed unbonded concrete structures are increasingly being built. The mechanical behavior of prestressed concrete beams with external unbonded tendon is different from that of normal bonded PSC beams in that the slip of tendons at deviators and the change of tendon eccentricity occurs as external loads are applied in external unbonded PSC beams. The purpose of the present paper is therefore to evaluate the flexural behavior by performing static flexural test according to tendon area and tendon force. From experimental results, before flexural cracking, there was no difference between external members and bonded members. However, after cracking, yielding load of reinforcement, ultimate load, and the tendon stress of external members was lower than that of bonded members. For the relationship of load-tendon stress, the increasing of tendon strain was inversely proportional to the initial tendon force. However, even if the initial tendon force was large, the tendon strain with small effective stress was smaller than that with large effective stress. The concrete compressive strain was proportional to the effective stress of external tendon. From the comparison between test results and codes, the ACI-318 could not consider the effect of tendon force or effective stress, and especially the results of ACI-318 were very small, so it was very conservative. And the AASHTO 1994 could be influenced on the tendon area, initial force and effective stress, but as it was made on the basis of internal unbonded tendon, its results were much larger than the test results. For this reason, the new correct predict equation of external tendon stress will be needed.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.3
• /
• pp.582-586
• /
• 2004

Cooked rice for immunosuppressed patients was irradiated at 0, 5 and 10 kGy, and investigated on the irradiation effect on color, texture, and shelf-life during storage at 3$0^{\circ}C$. Yellowness was significantly increased in cooked rice with the increase of storage period and irradiation dose (p<0.05) and the ratio of adhesiveness/hardness of cooked rice was decreased by irradiation at 10 kGy. The result of total plate count of non-irradiated cooked rice was 7 log CFU/g and that of 5 kGy irradiated cooked rice on 7 day storage was 4 log CFU/g, while that of 10 kGy irradiated sample was not detected even at the end of storage. Irradiation with 5 kGy on cooked rice is proper to prolong the shelf-life considering color, texture, and it was extended to over a month. Further research is necessary to apply the high-dose irradiation for long-term preservation to inhibit color and texture change.

• Journal of Korea Multimedia Society
• /
• v.12 no.4
• /
• pp.608-615
• /
• 2009

As RFID tag prices have rapidly been declining because of the advance of RFID technology, each tag is attached to an individual item, not a packing box only, for managing the item much more precisely. However, some mechanisms are essential to handle a very large amount of tag data quickly because readers and middlewares processing RFID data have limited hardware resources. In this paper, we design and implement a new mobile agent-based distributed software tools to satisfy this requirement efficiently. These tools provide a convenient environment enabling required data to be pre-processed repeatedly in transit by transferring a mobile agent including its specified data collection policy to numerous mobile readers. This behavior can significantly reduce the elapsed time required for processing huge volumes of tag data at the readers and middlewares with their very high recognition rates compared with the existing one to process the data by fixed readers after having arrived at the destination

• Convergence Security Journal
• /
• v.12 no.4
• /
• pp.3-8
• /
• 2012

Smartphones have all the recent technology integration and NFC (Near Field Communication) Technology is one of them and become an essential these days. Despite using smartphones with NFC technology widely, not many security vulnerabilities have been discovered. This paper attempts to identify characteristics and various services in NFC technology, and to present a wide range of security vulnerabilities, prevention, and policies especially in NFC Contactless technology. We describe a security vulnerability and an possible threat based on human vulnerability and traditional malware distribution technic using Peer-to-Peer network on NFC-Enabled smartphones. The vulnerability is as follows: An attacker creates a NFC tag for distributing his or her malicious code to unspecified individuals and apply to hidden spot near by NFC reader in public transport like subway system. The tag will direct smartphone users to a certain website and automatically downloads malicious codes into their smartphones. The infected devices actually help to spread malicious code using P2P mode and finally as traditional DDoS attack, a certain target will be attacked by them at scheduled time.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.6 no.4
• /
• pp.336-341
• /
• 2018

The prestressing force introduced to the tendon in pretensioned concrete members is transferred by direct bond between tendon and concrete, which requires a proper estimation of stress transfer length. The use of pretensiond and/or precast members with UHPC (Ultra High Performance Concrete) may give many advantages in quality control. This paper presents an experiment to estimate the stress transfer length of UHPC for various compressive strength levels of UHPC, cover depths, diameters of tendons and tensioning forces. According to the result of this experiment, the stress transfer length of UHPC member is much reduced comparing that of normal strength concrete. The reduction in stress transfer length of UHPC may come from the high bond strength capacity of UHPC. The transfer lengths obtained from this experiment are compared to those in current design code and a new formula is proposed.

• Journal of Biosystems Engineering
• /
• v.4 no.1
• /
• pp.58-66
• /
• 1979

동력경운기용 두류의 무경운 파종기에 부착하여 사용하는 구절기중에서 소요견인력이 작고 구절작업정도가 양호한 구절기의 개발을 위한 기초자료를 얻기 위하여 구동식 토조에 인공강토를 채우고 원판형 및 호우형 구절기의 소요견인력과 이에 영향을 미치는 인자들의 관계를 구명코자 실내모형 확험을 실시하여 다음과 같은 결과를 얻었다. 원판형 구절기에 대하여 직경별로 조립각을 $8^{\circ}$ 와 $16^{\circ}$, 경심을 3 cm 와 6cm로 변화시키면서 2.75cm/sec의 속도로 견인력을 측정한 결과 원판의 직경이 약 28cm인 경우에 견인력이 최소로 나타났고, 직경이 이보다 크거나 작은 때는 견인력이 증가하는 경향을 나타냈으며 비저항도 대체로 비슷한 경향이었으나 원판의 직경이 약 30cm 일 때 최소로 나타났다. 종자파종의 심도조절을 목적으로 작구심(3cm 및 6 cm)과 견인력과의 관계를 조사하였던바, 경심과 견인력과의 관계는 거의 직선적인 변화를 나타냈으며 견인력에 영향을 미치는 인자중에서 경심의 영향이 가장 컸음을 알 수 있었다. 일반적으로 조립각 미 주행속도에 별 영향없이 경심 3cm 및 6 cm 공히 견인력은 직경 약 28 cm에서 , 비저항은 약 30cm에서 최소의 값을 나타내었다. 파종기의 작업성능과 관계가 깊은 주행속도 및 파시의 조절을 목적으로 원판의 조립각과 주행속도가 견인력에 미치는 영향을 조사했던 바, 조립각과 주행속도가 증가함에 따라 모두 견인력이 증가하는 경향을 나타내었으나 견인력에 미치는 영향은 주행속도가 더욱 크게 나타났다. 원판형 구절기와 호우형 구절기를 비교하기 위하여 쐐기각이$16^{\circ}$ 이고 리프트 각이 $20^{\circ}$ 인 호우형 구절기와 조건이 비슷한 조립각$16^{\circ}$ 의 원판형 구절기의 견인특성을 비교한 결과 직경 30cm 인 원판형의 경우는 비저항이 0.35-0.5kg/$cm^2$인데 비해 호우형의 경우는 0.71-1.02kg/$cm^2$로 나타나 호우형의 견인저항력이 평균 2 배정도 크게 나타났고 작구상태고 원판형의 경우보다 불량하였다.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.7 no.2
• /
• pp.79-86
• /
• 1974

The results from the experiment of natural collection and growth of arkshell(Anadara broughtoni, SCHRENCK) spat, which was collected at Seok-gok Bay located at Chang-weon-gun, Korea, and grown in the 1ittoral zone of Sa-gok-ri, Geo-je-gun, Korea, beginning from August 1,1973 to April 8,1974 are as follows; The larvae of arkshell came out from the very first day of the study August 1, which continued till the end of September, whose amount was not so much varied, but relatively continuous. The drifting larvae were also rather small amount, from which some 200 to 400 larvae were attached through the respective collecting equipment made from straw with the dimension of length 1.5m and breadth 12cm. It is regarded relatively large amount collected and recognised worth while enough to use as the industrial collecting method. The average shell length of spat attached was 0.54mm on 17th September, 4.11mm on 21st October, 10.47mm on 25th November in 1973 and 11.08mm on 8th April in 1974 whose progress was recognized relatively faster, comparing with the other up-to date report, The relationship between the shell length(L) and the longest radial rib(R) was as follows: Below 2.5mm of the shell length: R=0.7393 L -0.0080 Above 2.5mm of the shell length: R=0.8253 L-0.2595 And the relationship between the shell length (L) and the shell breadth (B) was as follows: Below 2.5mm of the shell length: B=0.3505 L +0.0527 Above 2.5mm of the shell length: B=0.4631 L -0.3602 The exponential curve equation between shell length (L) and the total weight (W)was as follows : Below 16mm of the shell length: W=0.19957 $L^{2.5726}$ Above 16mm of the shell length: W=0.20602 $L^{2.8400}$ In view of the above the relative growth among the shell length, the longest radial rib and the shell breadth was changed in the vicinity of 2.5mm of the shell length. And relationship between the shell length and the total weight was changed in the vicinity of 16mm of the shell length.

• Journal of Life Science
• /
• v.17 no.4 s.84
• /
• pp.510-514
• /
• 2007

This study was carried on cool and RT(room temperature) storage of unhulled rice. In RT storage of an analysis of coefficient relation, high significant positive coefficients were observed in toyo index and breakdown, setback and protein content. high significant negative coefficients were showed setback and breakdown, breakdown and protein content. In cool storage of an analysis of coefficient relation, high significant positive coefficients were observed in toyo index and amylose content and gelatinization start temperature and protein content and high significant negative coefficients were showed toyo index and whiteness, toyo index and gelatinization start temperature, gelatinization start temperature and amylose content. In RT storage of a path coefficient analysis, a highest positive direct influence was observed in amylose content and a highest negative direct influence was protein content. Positive indirect influence was high revealed breakdown and protein content and negative indirect influence was gelatinization start temperature and Mg/K ratio. In cool storage of a path coefficient analysis, a highest positive direct influence was whiteness and a highest positive indirect influence was gelatinization start temperature. Positive indirect influence was high revealed gelatinization start temperature and amylose content, negative indirect influence was whiteness and gelatinization start temperature. In RT storage of Multiple regression equation of Toyo index based on physicochemical properties of unhulled rice, a highest coefficient of determination was revealed among five facters of whiteness, protein content, Mg/K ratio, amylose content and gelatinization start temperature. In cool storage of Multiple regression equation of toyo index based on physicochemical properties of unhulled rice, highest coefficient of determination was revealed among five facters of moisture content, amylose content, gelatinization start temperature, breakdown and setback.

• Journal of the Korea Concrete Institute
• /
• v.19 no.3
• /
• pp.323-331
• /
• 2007

The development length equations of the GFRP rebars are suggested based on the pullout tests performed in this study. A total of 48 pullout and modified pullout tests were completed. Test variables included embedment length (L=10, 15, 20, and $30d_b$), vertical and horizontal installation of the rebars, height of the rebars (H=100 and 300 mm), and cover thickness $(C=2{\sim}5d_b)$. D13 GFRP rebars domestically developed were used in the experimental program. The average of the bond strength of all vertically installed GFRP rebars was 6.39 MPa with a 5% fractile of 4.63 MPa. A basic development length equation was derived that resulted in an equation equivalent to the one proposed in the ACI 440.1R-03. Careful reevaluation of the bond strength using the modified pullout test indicated that a modification of the design equation was necessary so that the basic development length increases by 11%. The top bar effect of the horizontally installed rebars as well as the effect of the cover thickness were determined and included in the set of suggested equations. Since the current equations were derived from testing rebars embedded in relatively low strength concrete $(f_{ck}=20{\sim}24MPa)$, they result in conservative development lengths when applied to bars embedded in higher strength concretes.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.3 no.3
• /
• pp.177-186
• /
• 1970

The spawning of the abalone, Haliotis discus hannai, was induced In October 1969 by air ex-position for about 30 minutes. At temperatures of from 14.0 to $18.8^{\circ}C$, the youngest trochophore stage was reached within 22 hours after the egg was laid. The trochophore was transformed into the veliger stage within 34 hours after fertilization. For $7\~9$ days after oviposition the veliger floated in sea water and then settled to the bottom. The peristomal shell was secreted along the outer lip of the aperture of the larval shell, and the first respiratory pore appears at about 110 days after fertilization. The shell attained a length of 0.40 mm in 15 days, 1.39 mm in 49 days, 2.14 mm in 110 days, 5.20 mm in 170 days and 10.00 mm in 228 days respectively. Monthly growth rate of the shell length is expressed by the following equation :$L=0.9981\;e^{0.18659M}$ where L is shell length and M is time in month. The density of floating larvae in the culture tank was about 10 larvae per 100 co. The number of larvae attached to a polyethylene collector ($30\times20\;cm$) ranged from 10 to 600. Mortality of the settled larvae on the polyethylene collector was about $87.0\%$ during 170 days following settlement. The culture of Nauicula sp. was made with rough polyethylene collectors hung at three different depths, namely 5 cm, 45 cm and 85 cm. At each depth the highest cell concentration appeared after $15\~17$ days, and the numbers of cells are shown as follows: $$5\;cm\;34.3\times10^4\;Cells/cm^2$$ $$45\;cm\;27.2\times10^4\;Cells/cm^2$$ $$85\;cm\;26.3\times10^4\;Cells/cm^2$$ At temperatures of from 13.0 to $14.3^{\circ}C$, the distance travelled by the larvae (3.0 mm In shell length) averaged 11.36 mm for a Period of 30 days. Their locomation was relatively active between 6 p.m. and 9 p.m., and $52.2\%$ of them moved during this period. When the larvae (2.0 mm in shell length) were kept in water at $0\;to\;\~1.8^{\circ}C$, they moved 1.15cm between 4 p.m. and 8 p.m. and 0.10 cm between midnight and 8 a.m. The relationships between shell length and body weight of the abalone sampled from three different localities are shown as follows: Dolsan-do $W=0.2479\;L^{2.5721}$ Huksan-do $W=0.1001\;L^{3.1021}$ Pohang $W=0.9632\;L^{2.0611}$