• Journal of Fisheries and Marine Sciences Education
• /
• v.27 no.5
• /
• pp.1352-1363
• /
• 2015

This study was carried out to investigate the characteristics of the dependent variables depending on the condition changes of independent variable of the operation and the material during the production of collets added with rice and dried shrimp by using single extruder to utilize as basic data for the manufacture of extrusion collets. A total of 7 independent variables were set up as a raw, 20, 40 and 60 mesh for the powder particle size of rice; 12, 14, 16 and 18% for the moisture content of rice; 2, 4, 6 and 8% for the addition amount of dried shrimp; 90, 95, 100 and $110^{\circ}C$ for the barrel temperature; 210, 280 and 340 rpm for the screw speed; 4, 6, 8 and 10 mm for the discharge port diameter; 30, 40, 50 and 60 kg/h for the input amount of the mixed material. The characteristics of the dependent variables including puffing ratio, moisture content, lightness, uniformity, productivity of collets was to be studied by changing the conditions of the independent variables. As a results of this study, 20 mesh of powder particle size of rice, 14% of moisture content of rice, 4% of addition amount of dried shrimp, $100^{\circ}C$ of barrel temperature, 280 rpm of screw speed, 6 mm of discharge port diameter and 50 kg/h of input amount of mixed material were found to be the most preferable over other independent variables for the production of extrusion collets. In conclusion, it is necessary to set the independent variable in order to produce the high quality collets added with the rice as the main raw material and dried shrimp as the sub-materials.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.7 no.1
• /
• pp.115-123
• /
• 2005

Quantitative understanding of spatial characteristics of the study site is a prerequisite to investigate water and carbon cycles in agricultural and forest ecosystems, particularly with complex, heterogeneous landscapes. The spatial characteristics of variables related with topography, vegetation and soil in Gwangneung forest watershed are quantified in this study. To characterize topography, information on elevation, slope and aspect extracted from DEM is analyzed. For vegetation and soil, a land-cover map classified from LANDSAT TM images is used. Four satellite images are selected to represent different seasons (30 June 1999, 4 September 2000, 23 September 2001 and 14 February 2002). As a flux index for CO₂ and water vapor, normalized difference vegetation index (NDVI) is calculated from satellite images for three different grid sizes: MODIS grid (7km x 7km), intensive observation grid (3km x 3km), and unit grid (1km x 1km). Then, these data are analyzed to quantify the spatial scale of heterogeneity based on semivariogram analysis. As expected, the scale of heterogeneity decreases as the grid size decreases and are sensitive to seasonal changes in vegetation. For the two unit grids where the two 40 m flux towers are located, the spatial scale of heterogeneity ranges from 200 to 1,000m, which correspond well to the climatology of the computed tower flux footprint.

• Nuclear Engineering and Technology
• /
• v.25 no.1
• /
• pp.154-165
• /
• 1993

A stochastic method using continuous time Markov process is presented to model the one-dimensional convective nuclide transport in geologic media, which have usually heterogeneous feature in physical/geochemical parameters such as velocity, dispersion coefficient, and retardation factor resulting poor description by conventional deterministic advection-dispersion model. The primary desired quantities from a stochastic model are the mean values and variance of the state variables as a function of time. The time-dependent probability distributions of nuclides are presented for each discretized compartment given the volumetric groundwater flux and the intensity of transition. Since this model is discrete in medium space, physical/geochemical parameters which affect nuclide transport can be easily incorporated for the heterogeneous media as well as remarkably layered media having spatially varied parameters. Even though the Markov process model developed in this study was shown to be sensitive to the number of discretized compartments showing numerical dispersion as the number of compartments are increased, this could be easily calibrated by comparing with the analytical deterministic model.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.5
• /
• pp.199-210
• /
• 2003

The development of strain localization within shear zones is frequently observed during soil deformation. In fact, the phenomenon appears to be more often the norm rather than the exception. Conceptually, any soil condition that renders negative work increment is prone to localization. In this study, a broad range of soil and loading conditions are investigated to test this criterion, including: dilative soil subjected to drained shear (standard case), contractive soil sheared under undrained conditions, cavitation in dilative soil in undrained shear, inhomogeneous soils, particle alignment in contractive soils made of platy particles, soils that experience particle crushing, and the shear of low-moisture and/or lightly cemented loose soils. Unique specimens and test procedures are designed to separately test each of these soil conditions in the laboratory According to experimental test results, soil specimens with post-peak strain softening behavior are prone to progressive failure, localization of deformations, and shear banding. The state of stress, the soil density, inherent mechanical and geometrical properties of soil particles, low water content, and heterogeneity can contribute to triggering strain localization. Considering all possible cases of localization, the best method to obtain the critical state line in the laboratory is to use contractive homogeneous specimens subjected to drained shear.

• Journal of the East Asian Society of Dietary Life
• /
• v.12 no.4
• /
• pp.318-325
• /
• 2002

Cooking characteristics of coated rice with water homogenate of citrus fruit peels (1% for rice) were investigated. The color of the coated rice both before and after cooking was dark yellow. The total content of carotenoids, hesperidin and naringin were 10.74, 2173.12 and 1468.40 mg% for citrus fruit peels, 0.46, 108.65 and 73.35 % for its water homogenate, 0.12, 21.73 and 14.62 mg% for coated rin, and 0.05, 8.67 and 5.87 mg% fur cooked coated rice, respectively. Citrus fruits peel contained 94.22 mg% of asparagine, 24.88 mg% of methionine, 19.64 mg% of alanine, and 15.37 mg% of ${\gamma}$-aminoisobutyric acid as the majority free amino acids, accounting for 70% of the total free amino acids present. Total free amino acid content of the cooked coated rice increased by 15% compared to those of cooked uncoated rice. The majority of minerals in the citrus fruit peels were K and Ca, accounting for 56% of total minerals present. The mineral content of cooked coated rice was generally higher than that of the cooked uncoated rice. The cooked coated rice showed comparable hardness, gumminess and brittleness, but higher cohesiveness and springiness than the cooked uncoated rice. There were no differences in sweet and bitter taste between the cooked uncoated and coated rice. However, the cooked coated rice showed higher sensory scores fur color acceptability, savory taste and overall acceptability than the cooked uncoated rice.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.31 no.2
• /
• pp.105-114
• /
• 2018

In this paper, the computer simulations are carried out by using the peridynamic theory model with various conditions including quasi-static loads, dynamic loads and crack propagation, branching crack pattern and isotropic materials, orthotropic materials. Three examples, a plate with a hole under quasi-static loading, a plate with a pre-existing crack under dynamic loading and a lamina with a pre-existing crack under quasi-static loading are analyzed by computational simulations. In order to simulate the quasi-static load, an adaptive dynamic relaxation technique is used. In the orthotropic material analysis, a homogenization method is used considering the strain energy density ratio between the classical continuum mechanics and the peridynamic. As a result, crack propagation and branching cracks are observed successfully and the direction and initiation of the crack are also captured within the peridynamic modeling. In case of applying peridynamic used homogenization method to a relatively complicated orthotropic material, it is also verified by comparing with experimental results.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.11a
• /
• pp.139-143
• /
• 1996

The theoretical study of deformation behavior for continous extrusion process (CONFORM) is shown in this paper. The extrusion process is compared with a conventional route, side extrusion, considering extrusion ratios, flash gaps and coefficients of friction. In each case the distribution of strain and strain rate is predicted by using the finite element method. In this study simplifying assumptions on the deformation geometry are made to investigate the plastic flow occuring in the area of deformation of the Conform process.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.15 no.2
• /
• pp.154-160
• /
• 1982

One dimensional unsteady heat conduction was studied on soybean curd as a water-protein-fat food system. This heterogeneous soybean curd could be treated as homogeneous material as for the unsteady heat conduction by 'effectiver' thermal diffusivity. Measurements were made with a apparatus designed and constructed by the author and also made with ice to establish the reliability, the reproducibility and the accuracy of the apparatus. It was found that the effective thermal diffusivity of soybean curd was substantially dependent on the fraction of protein and fat as well as water.

• Korean Journal of Materials Research
• /
• v.5 no.7
• /
• pp.829-834
• /
• 1995

Homogeneously dispersed zirconia suspension was prepared by addition of 500ppm polyvinyl alcohol (PVA). The powder compact by centrifugal casting from this suspension shows more uniform packing, higher packing density, and smaller pore size than that of suspension without PVA. On using this powder compacts, sintered monocllnic zirconia with the relative density of 98% could be obtained at low temperature of 125$0^{\circ}C$.

• Journal of the Korean Society of Groundwater Environment
• /
• v.6 no.4
• /
• pp.180-187
• /
• 1999

Transmissivity is often estimated from specific capacity data because of the expense of conducting standard aquifer test to obtain transmissivity and the relative availability of specific capacity data. Most often, analytic expression relating specific capacity to transmissivity derived by Theis (1963). Brown (1963). and Logan (1964) are used in this analysis. The analytic solution typically used to predict transmissivity from specific capacity in alluvial aquifers assuming influence radius and/or storage coefficient of the aquifers. But those do not agree well with the measured transmissivity in fractured rock aquifers and in heterogeneous aquifers. Razack-Huntely (199l). Huntely-Steffey (1992). and Mace (1997) proposed emphirical rotations between specific capacity and transmissivity in heterogeneous alluvial aquifers. fractured rock aquifers, and karst aquifers. This study focuses on comparison between transmissivity and specific capacity data in volcanic rock aquifers of Jeju Island. Emphirical relation between the log of transmissivity and the log of specific capacity suggests they no linearly related (correlation coefficient 0.951) and the width of $\pm$0.25 log cycles in transmissivity includes 96.6% of data.