• Title/Summary/Keyword: 비강

Search Result 597, Processing Time 0.028 seconds

Study on Rainfall infiltration Characteristics for Weathered Soils: Analysis of Soil Volumetric Water Content and Its Application (국내 풍화토의 강우 침투특성 분석을 위한 실험연구: 토양 체적함수비 분석 및 적용성 평가)

  • Kim, Man-Il;Chae, Byung-Gon;Cho, Yong-Chan;Seo, Yong-Seok
    • The Journal of Engineering Geology
    • /
    • v.18 no.1
    • /
    • pp.83-92
    • /
    • 2008
  • In order to analyze infiltration characteristics of rainfall in soil, two laboratory experiments were conducted using an amplitude domain reflectometry (ADR) sensor and a pore water pressure meter (PWP) in this study. The first experiment is to understand the dependency of volumetric water content and temperature for standard sand and weathered granite soil. The second experiment is a laboratory flume test with changes of rainfall condition. As the results of the dependency experiment, the volumetric water content is increased with increase of the output voltage measured by the ADR sensor in both the standard sands and weathered granite soil. Furthermore, the results also indicate necessity of consideration of the temperature dependency under the condition of high volumetric water contents from 0.15 to 0.45. In the flume test, two measurement devices are detected to the variation of volumetric water content and pore water pressure at the installation point of the flume. In especial, the measured values of ADR4 and PWP3 installed on the lower part of slope are higher than those of the others. It means that the lower part of slope plays a role of a runoff face and a beginning point of slope failure.

Perception and Production of English Grapheme <a> by Korean Students (한국 학생들의 영어 철자 <a> 인지와 발화)

Fabrication and Characterization of Aluminum Honeycomb Panel (경량 알루미늄 허니콤 판재의 제작 및 특성 평가)

  • Kim, Kee Joo
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.19 no.1
    • /
    • pp.666-671
    • /
    • 2018
  • A honeycomb panel is a plate made by attaching two surface plateson eitherside of a honeycomb core. The honeycomb plate hasexcellent specific strength and energy absorption and is suitable for use in regions where good impact resistance is required. Recently, with the increasing the need for a lightweight design to facilitate transportation, numerous studies have been conducted using aluminum honeycomb plates as body materials for vehicles such as automobiles and high-speed trains. In addition, honeycomb plates have excellent sound deadening properties, as well as excellent heat insulation and durability. Savings in weight using lightweight materials such as aluminum alloy for honeycomb panel's skin can lead to increase fuel economy and reduction in air pollution. In this study, in order to improve the design technology of the honeycomb plate material, the manufacturing technology of the aluminum honeycomb core and honeycomb plate material and various mechanical properties of the honeycomb plate were evaluated. From the results, it was found that the design of the manufacturing process of the aluminum honeycomb plate, as well as itsproduction and characteristics, were improved. The resulting excellent energy absorption capability of the honeycomb plate was due to the repetitive core buckling, indicating that the higher the compressive strength, the higher the strength per bonded area.

Magnetic and Electric Properties of Perovskite Manganite $La{1-x}Ba_xMnO_3(0\leqx\leq1)$ (페로브스카이트 망간산화물 $La{1-x}Ba_xMnO_3(0\leq \chi \leq1)$의 자기적, 전기적 특성)

  • 남윤성;이재은;신현수;주홍렬
    • Journal of the Korean Magnetics Society
    • /
    • v.10 no.3
    • /
    • pp.133-138
    • /
    • 2000
  • We have investigated some crystallographic, magnetic, and transport properties of the first colossal magnetoresistive compounds $La_{1-x}Ba_{x}MnO_3(0\leq\chi\leq$1)$(5\;K\leqT\leq360K,-5T\leqH\leq5T$ and resistivity $(100K\leqT\leq350K$measurements. $La_{1-x}Ba_{x}MnO_3$ were found to be ferromagnetic for all x.The $La_{1-x}Ba_{x}MnO_3$were found to be insulating for x< 0.2, metallic for 0.20.5. The magnitude of saturation magnetization (Ms) increased until x=1/8 and had theoretical maximum Ms for 0.13$\sfrac{3}{8}$ and had a constant value of 335~340 K for x>$\sfrac{3}{8}$. For $x\geq0.5$ the $La_{1-x}Ba_{x}MnO_3$ samples showed a percolation-type conduction behavior and enhanced low field magnetoresistance caused by simultaneous occurrence of the chemical/magnetic phase separation.

  • PDF

Correction of Secondary cleft lip-nasal deformity; secondary rhinoplasty in children and adults (구순열 이차비기형의 교정; 아동과 성인에서의 이차 비성형술)

  • Song Gin-Ah;Myung Hoon;Hwang Soon-Jung;Seo Byoung-Moo;Lee Jong-Ho;Choung Pill-Hoon;Kim Myung-Jin;Choi Jin-Young
    • Korean Journal of Cleft Lip And Palate
    • /
    • v.6 no.1
    • /
    • pp.17-25
    • /
    • 2003
  • Correction of the cleft-lip nasal deformity is a difficult task that requires clear understanding of the associated complex anatomy and function as well as the operation time, the selection of an operation method, On the expectation that it helps enhance understanding the current trend of cleft-rhinoplasty, authors analyzed secondary rhinoplasty between 1999 and 2002, In both the unilateral and bilateral cleft lip rhinoplasty, we reviewed the timing of repair, site of correction and it's major technique, incision or approach method, autogenous cartilage graft method, All patients with a septal deviation did not have a septal surgery, We were active in alar and nasal tip surgery and passive in septal and dorsal deformity correction, And for children, we used a conservative method but for adults, we used radical approach, Most surgeries are focused on esthetic goal and we thought that objective evaluation for nasal obstruction was needed for bener and predictable outcome.

  • PDF

The Measurement of Vertical Length from the Root Tip of Maxillary Anterior Teeth to Nasal Floor, When Maxillary Anterior Implants Placed (상악전치부 임플란트 식립 시 상악전치부 치근첨에서 비강저까지 치조골의 수직적 길이 측정)

  • Jang, Hae-Man;Kim, Jin-Wook;Kwon, Tae-Geon;Jang, Hyun-Joong;Kim, Chin-Soo;Lee, Sang-Han
    • Maxillofacial Plastic and Reconstructive Surgery
    • /
    • v.34 no.5
    • /
    • pp.326-331
    • /
    • 2012
  • Purpose: Length measurement from maxillary anterior teeth root tip to nasal floor is incorrect in panoramic radiography. Comparison of cone beam computed tomography (CBCT) and panoramic radiography should be helpful in determining the vertical length. Methods: Sixty nine patients were taken CBCT and panoramic radiography of the maxillary anterior. First measurement is length of parallel lines from the central incisor and lateral incisor root tip to nasal floor on CBCT. Second measurement is length of perpendicular lines from the central incisor and lateral incisor root tip to nasal floor on CBCT. Third measurement is length from the central incisor and lateral incisor root tip to nasal floor on panoramic radiographys. Results: In the first measurement of the maxillary central incisors, an average of $11.36{\pm}2.49$ mm in males and $10.49{\pm}2.17$ mm in females. In the second measurement of the maxillary central incisors, $10.41{\pm}2.42$ mm in males and $9.18{\pm}2.08$ mm in females. In the third measurement of the maxillary central incisors, $10.71{\pm}2.20$ mm in males and $9.27{\pm}2.10$ mm in females. In the first measurement of the maxillary lateral incisors, an average of $13.40{\pm}2.04$ mm in males and $11.96{\pm}2.20$ mm in females. In the second measurement of the maxillary lateral incisors, $11.25{\pm}1.82$ mm in males and $10.06{\pm}1.68$ mm in females. In the third measurement of the maxillary lateral incisors, $11.47{\pm}2.01$ mm in males and $10.13{\pm}1.70$ mm in females. Conclusion: The vertical length from root tip to nasal floor was longer in male than female (P>0.05). First measurement was longer than third measurement (P<0.05). This is the actual placement of the implant site measured on the vertical length than the length of the panorama means that there are a few more free. The first measurement was longer than 114% over the third measurement.

Fabrication of closed hollow obturator for hard palate defect patient undergone maxillectomy (상악절제술로 인한 경구개 결손 환자에서의 closed hollow obturator 제작 증례)

  • Jang, Woo-Hyung;Lim, Hyun-Pil;Yun, Kwi-Dug;Park, Chan;Yang, Hong-So
    • The Journal of Korean Academy of Prosthodontics
    • /
    • v.58 no.1
    • /
    • pp.30-34
    • /
    • 2020
  • Maxillectomy is performed to remove the tumor in the palate, maxillary sinus, buccal mucosa or nasal cavity. The resection range depends on the size and the extent of the tumor and it affects speech production or cause nasal regurgitation during feeding. Obturator can occlude an opening such as an oro-nasal fistula and protect the defect area. Successful reconstrucion of the patient's oral cavity who have gone over the maxillectomy is a difficult task. The condition and number of teeth, the remaining support area, and the extent of the defect area have a great influence on manufacturing the obturator. If these factors are disadvantageous, the prognosis of the prosthesis is uncertain. The final obturator must have a sufficient retention in the patient's oral cavity and must not irritate the surrounding tissue and support area where the resection was performed.In this case, a 55 year old female went through the maxillectomy and the only 3 teeth remained. And the retention of the maxillary prosthesis seems to be poor. So that, we fabricated the closed hollow obturator which has reduced weight compared to the conventional obturator. Consequently the closed hollow obturator can give better sealing and the adaptation.

APERT SYNDROME : CASE REPORT (Apert syndrome : 증례보고)

  • Park, Kwang-Sun;Park, Ho-Won;Lee, Ju-Hyun;Seo, Hyun-Woo
    • Journal of the korean academy of Pediatric Dentistry
    • /
    • v.35 no.3
    • /
    • pp.539-547
    • /
    • 2008
  • Apert syndrome is an autosomal dominant condition characterized by craniosynostosis, midface hypoplasia, and syndactyly of the hands and feet. It occurs in about 1 of every 65,000 to 160,000 births and is caused by a mutation in the fibroblast growth factor receptor 2(FGFR2) gene. Apert syndrome typically produces acrobrachycephaly(tower skull). The occiput is flattened, and there is a tall appearance to the fore head. Ocular proptosis is a characteristic finding, along with hypertelorism and downward slanting lateral palpebral fissures. The middle third of the face is markedly retruded and hypoplastic, resulting in a relative mandibular prognathism. The reduced size of the nasopharynx and narrowing of the posterior choana can lead to mouth breathing, contributing to an open-mouth apprance. Three fourths of all patients exhibit either a cleft of the soft palate or a bifid uvula. The maxillary hypoplasia leads to a V-shaped arch and crowding of the teeth. A 6-year-old male patient visited to the Department of Pediatric dentistry, Kangnung National University of Dental Hospital. He visited the hospital to get treatment of carious teeth. The purpose of this report is to present a specific dental manifestations about the apert syndrome.

  • PDF

The effect of silica on the development of experimental Acanthamoeba meningoencephalitis with reference to the macrophage role in mice (Acmthmoeba culbertsoni 감염에 대한 silica 투여의 영향 - 대식세포의 역할을 중심으로 -)

  • 이홍수;신호준
    • Parasites, Hosts and Diseases
    • /
    • v.32 no.4
    • /
    • pp.259-266
    • /
    • 1994
  • The role of macrophages was observed In intranasally infected CSH/HeJ mice with trophozoites (3 ×105) of Acnnthomoeba culbertsoni which was a kind of free-living amoebae inducing meningoencephalitis in human and experimental animals. The mortality was 60% in the group of intraperitoneally injected mice with silica (0.5 mg/0.5 ml). It was much higher than that of 10% in the group of amoeba infected mice without silica administration. The phagocytic index of peritoneal macrophages co-cultured with Toxoplasma gondii was estimated daily. In contrast to the control and amoeba infected group which didn't show significant fluctuation of the phagocytic indices, the silica administrated group revealed under 3% until day 3, and gradual increase up to 24.7% in day 5 which was same level of amoeba infected group without silica administration. The level of interleukin- lb (IL- lb) measured by ELISA was the highest in the amoeba infected group without silica injection and the lowest in the amoeba infected group with silica administration. In the test of the amoebicidal activity of mice peritoneal macrcphages Dl uitro, silica administration revealed reducing effect on amoebicidal activity of macrophages. In conclusion, macrophages were proven to play a significant role in defense mechanism against the development of experimentally induced Acnnthamoebo menigoencephalitis.

  • PDF

Viral Etiology and Epidemiology of Outpatients with Acute Respiratory Illnesses in Busan: 2007-2008 (부산지역 급성 호흡기 증상으로 외래 방문한 환자의 바이러스 원인과 역학: 2007-2008년)

  • Jeong, Jin Woo;Hwang, Youn Ha;Cho, Kyung Soon;Jung, Myung Ju;Min, Sang Kee;Kim, Seong Joon;Chung, Woo Sik
    • Pediatric Infection and Vaccine
    • /
    • v.17 no.2
    • /
    • pp.130-136
    • /
    • 2010
  • Purpose : The purpose of this study is to identify the viral etiology of acute respiratory illnesses and to determine epidemiology in outpatients in Busan, Korea. Methods : We collected nasal wash samples from 990 patients who visited the hospital for acute respiratory illnesses between January 2007 and December 2008. Extracted DNA or RNA from specimens was used for viral detection by an RT-PCR method. Results : Of a total of 990 samples, viruses were detected in 351 cases (35.5%). The ratio of male to female was 1.6:1 and 93.7% were less than 5 years old. Rhinovirus was detected year-round in 202 cases (57.5%), respiratory syncytial virus from October to March in 57 cases (16.2%), adenovirus year-round in 37 cases (10.5%), influenza virus from December to April in 21 cases (6%), bocavirus from January to August in 15 cases (4.3%), parainfluenza virus from April to July in 9 cases (2.6%), coronavirus from January to July in 7 cases (2%), and enterovirus from June to September in 3 cases (0.9%). Conclusion : We identified the etiology and epidemiology of viruses that caused the acute respiratory diseases that were prevalent in Busan, 2007-2008. Further surveillance will be necessary.