• KOMUNHWA
• /
• no.61
• /
• pp.129-164
• /
• 2003

It is this theory that examines and compares the early stone-lined tombs at Busan and Kimhae area in the downstream of Nakdong river about a type of group boiling these, an age bering the Skills's earthenwares, a structural characteristic and origination

• Nuclear industry
• /
• v.20 no.6 s.208
• /
• pp.31-44
• /
• 2000

본 연구에서 액체금속로의 노심용융(core meltdown)으로 인한 초 즉발 임계(super-prompt critical)의 출력 폭주 사고시, 노심의 반응도 및 열수력 특성 변화와 에너지 방출량등을 계산하기 위하여, Bethe-Tait 방버론을 수정, 보완한 분석 모델이 개발되었다. 주요 보완 내용으로서는, 금속 연료 노심의 단상 액체 영역에서의 선형의(Linear) threshold 형태의 상태 방정식뿐만 아니라 포화 증기(saturated fuel vapor) 영역에서의 상태 방정식이 개발되었고, 이에 따른 노심 붕괴 반응도(disassembly reactivity)의 분석 모델이 개발되었다. 또한 도플러 반응도 효과를 고려하기 위한 분석모델도 아울러 개발되었다. 상기 보완 모델을 실행할 수 있는 수치 해석 프로그램이 개발되었고, 이를 활용하여 KALIMER에서 HCDA가 발생하였을 경우 노심에서의 에너지 방출량 계산이 수행되었다. 분석결과 도플러 효과와 포화 증기 영역에서의 압력 증가 및 노심팽창의 중요성이 확인되었다. 도플러 효과가 고려되지 않을 경우 HCDA는 분석된 모든 반응도 삽입률에 대하여 폭발적인 에너지 방출과 함께 사고가 종결되는 것으로 평가되었다. 그러나 도플러 상수가 최적 평가치인 -0.002인 경우 50$/s이하의 반응도 삽입률에서는 노심은 비등점(0.8KJ/g)에 도달치 않았으며, 설계 기준 사고인 100$/s의 경우에도 노심은 포화 증기 영역에 머물고 압력이 급격히 증가하는 단상(single phase)액체 영역의 threshold 값에 미치지 않기 때문에 사고는 핵연료 증기(vapor)의 점진적인 분산과 함께 종결되는 것으로 분석되며, 총 에너지 발생량은 약 1,800MJ로서 기계적 손상 에너지로 전환되는 분율을 고려할 때 KALIMER 원자로 용기의 구조 설계 기준치에 비해 상당한 여유도를 갖는 것으로 평가되었다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.8 no.4
• /
• pp.239-246
• /
• 2004

The fixed ends beam is analyzed by the s d 0 f system with the rigid-plastic model. And the safety criteria of the fixed ends beam to the Impulsive loads are established with the peak-load ratio to the static collapse load and impulse ratio to the ideal impulse producing the critical displacement. It is shown that the impulse and the peak-load of the impulsive loads are the important factors for the damage of the structures. It is also shown that the damage curves with the peak-load and impulse ratio are useful method to estimate the damage of the structures due to the emphasis on the equivalent dynamic loads rather than the equivalent static loads in the process of deriving the curve.

• Explosives and Blasting
• /
• v.26 no.1
• /
• pp.1-5
• /
• 2008

In this study, the structural behavior accorded by pre-weakening before demolishing a cylindrical structure was investigated to ensure structural stability using 3 dimensional applied element method (3D AEM). An opening angle of crushed area for the pre-weakening was changed to examine the displacement behavior of the cylindrical structure. This study shows that the crushing range for pre-weakness must be below 40% to void the collapse of the cylindrical silo structure.

• Journal of Korea Water Resources Association
• /
• v.38 no.2
• /
• pp.155-166
• /
• 2005

Upwind schemes are very well adapted to the discontinuous flow and have become popular for applications Involving dam break flow, transcritical Slow, etc. However, upwind schemes have been applied mainly to the idealized problems not to the natural channels with irregular geometry so far because of the error due to source terms. In this paper, the new type of upwind discretization of source terms, which uses the normalized Jacobian to discretize the source terms, is proposed. As results of tests to flows with source terms by the upwind models, the method proposed in this paper is proved as efficient and accurate. This generalized method for differencing source terms is simple and might beapplicable to diverse type of flux upwind discretization scheme in finite difference method.

• Journal of the Society of Naval Architects of Korea
• /
• v.28 no.2
• /
• pp.228-240
• /
• 1991

Many experimental data of fatigue crack propagation show that the fatigue crack propagation process is stochastic. Therefore, the study on the crack propagation must be based on the probabilistic approach. In the present paper, fatigue crack propagation process is assumed to be a discrete Markov process and the method is developed, which can evaluate the reliability of the structural component by using Markov chain model(Unit step B-model) suggested by Bogdanoff. In this method, leak failure, plastic collapse and brittle fracture of the critical component are taken as failure modes, and the effects of initial crack distribution, periodic and non-periodic inspection on the probability of failure are considered. In this method, an equivalent load value for random loading such as wave load is used to facilitate the analysis. Finally some calculations are carried out in order to show the usefulness and the applicability of this method. And then some remarks on this method are mentioned.

• The Korean Journal of Applied Statistics
• /
• v.20 no.3
• /
• pp.551-559
• /
• 2007

The maximum likelihood estimation is not robust against outliers in the logistic regression. Thus we propose an algorithm for the robust estimation, which identifies the bad leverage points and vertical outliers by the V-mask type criterion, and then strives to dampen the effect of outliers. Our main finding is that, by an appropriate selection of weights and factors, we could obtain the logistic estimates with high breakdown point. The proposed algorithm is evaluated by means of the correct classification rate on the basis of real-life and artificial data sets. The results indicate that the proposed algorithm is superior to the maximum likelihood estimation in terms of the classification.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.8 no.1
• /
• pp.157-164
• /
• 2004

The safety criteria for the simple beam with a rigid-plastic model under the impulsive loadings are established with the peak-load ratio to the static collapse load and impulse ratio to the ideal impulse producing the plastic hinge at the mid-span. It is shown that the impulse and peak-load of the impulsive loadings are the important factors for the damage of the structures. It is also shown that the damage curves with the peak-load and impulse ratio may be useful method to estimate the damage of the structures due to the emphasis on the equivalent dynamic loads rather than the equivalent static loads in the process of deriving the curve.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.96-96
• /
• 2016

최근 들어 지구온난화 등의 환경적 요인과 지역별 온도차 등으로 인해 국지성 호우가 빈발하고 있다. 많은 양의 폭우가 좁은 지역에 집중적으로 비를 뿌리는 국지성 호우는 저지대 침수와 범람, 산사태, 축대 붕괴 등의 위험성 등을 증가시키며, 특히 도시지역은 개발로 인한 지표면의 포장 등 자연공간이 감소하여 개발 전 지표면의 유역 내 저류 및 지연효과가 현저히 감소하고 있다. 시가지의 확대와 도로포장 등 유역 내 불투수층의 증가로 홍수유출량과 첨두유출량이 점차 증가하고 있고 이러한 국지성 호우에 의한 피해는 점점 다양해지고 대형화 되고 있으며, 버스정류장 한 두개 정도의 거리에서도 호우형태가 크게 달라지고 있다. 하지만 영동지방의 경우 1개의 관측소가 $834.4km^2$, 낙동강 유역의 경우 $126.8km^2$로 간헐적으로 분포되어 있다. 많은 양의 폭우가 좁은 지역에 집중적으로 비를 뿌리는 국지성 호우를 관측하기 위해서는 고밀도의 면적강우량 산정이 필요하다. 본 연구에서는 차량용 강우센서를 이용하여 W-S-R 관계식을 개발하였으며, 대상지역인 삼척시내를 대상으로 면적강우량을 산정 하였으며, 실제 관측 면적강우량과의 비교를 통해 차량용 강우 센서를 이용하여 생산된 면적강우량의 효용성을 검토하였다.

• Food Engineering Progress
• /
• v.15 no.1
• /
• pp.70-74
• /
• 2011

The effects of high pressure homogenization (microfluidization) on physicochemical properties of normal maize and oxidized maize starch film were studied. The molecular dispersibility of amlyose and amylopectin and the disintegration of granular structure had a marked effect on the physicochemical properties of starch films. The high pressure homogenized starch films showed increased solubility and transmittance due to the absence of gelatinized starch granules. The tensile strength of starch film increased significantly with decreasing oxygen permeability after high pressure homogenization, indicating that starch molecules were more uniformly and fully dispersed during the film formation. As a result, a clear starch film with improved mechanical properties was obtained after high pressure homogenization due to the increased interactions between the uniformly dispersed starch molecules.