• Journal of radiological science and technology
• /
• v.40 no.4
• /
• pp.533-542
• /
• 2017

In diagnostic radiology, the imaging system has been changed from film/screen to digital system. However, the method for removing scatter radiation such as anti-scatter grid has not kept pace with this change. Therefore, authors have devised the indirect flat panel detector (FPD) system with net-like lead in substrate layer which can remove the scattered radiation. In clinical context, there are many radiographic examinations with angulated incident X-ray. However, our proposed FPD has net-like lead foil so the vertical lead foil to the angulate incident X-ray would have bad effect on its performance. In this study, we identified the effect of vertical/horizontal lead foil component on the novel system's performance and improved the structure of novel system for clinical usage with angulated incident X-ray. Grid exposure factor and image contrast were calculated to investigate various structure of novel system using Monte Carlo simulation software when the incident X-ray was tilted ($0^{\circ}$, $15^{\circ}$, and $30^{\circ}$ from the detector plane). More photons were needed to obtain same image quality in the novel system with vertical lead foil only then the system with horizontal lead foil only. An optimal structure of novel system having different heights of its vertical and horizontal lead foil component showed improved performance compared with the novel system in a previous study. Therefore, the novel system will be useful in a clinical context with the angulated incident X-ray if the height and direction of lead foil in the substrate layer are optimized as the condition of conventional radiography.

• The korean journal of orthodontics
• /
• v.30 no.3 s.80
• /
• pp.273-285
• /
• 2000

The aim of this investigation was to evaluate the differences of two canti-leyer springs by using a new simulation system. This was done using a Calorific machine that compared iron uprighting spring and root uprighting spring. The Calorific machine was designed to allow observation of the whole process of tooth moving, and is composed of three parts(a temperature regulating system, electro-thermodynamic teeth, and an artificial alveolar bone component). The experiment of both mechanics were repeated five times and measured two times. The intra-examiner agreement and inlet-examiner agreement were $96.54\%\;and\;95.73\%$ and these data were statistically tested by paired t-test. The obtained results were as follows. 1. Distal and buccal movement of the anchor teeth were observed greater in the root uprighting spring than the crown uprighting spring. 2. Crown uprighting spring showed distal movement of the crown of lower second molar for 3.29mm but root uprighting spring showed only 1.68mm. 3. Crown uprighting spring exhibited forward movement of mesial and distal root of the lower second molar for 3.91mm, 3.60mm but the root uprighting spring showed 6.76mm, 6.26mm.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.33 no.3
• /
• pp.93-100
• /
• 2021

Since the IB (Immersed Boundary) method, which can perform coupling analysis with objects and fluids having an impermeable boundary of arbitrary shape on a fixed grid system, has been developed, the IB method in various CFD models is increasing. The representative IB methods are the directing-forcing method and the ghost cell method. The directing-forcing type method numerically satisfies the boundary condition from the fluid force calculated at the boundary surface of the structure, and the ghost-cell type method is a computational method that satisfies the boundary condition through interpolation by placing a virtual cell inside the obstacle. These IB methods have a disadvantage in that the computational algorithm is complex. In this study, the simplified immersed boundary (SIB) method enables the analysis of temporary structures on a fixed grid system and is easy to expand to three proposed dimensions. The SIB method proposed in this study is based on a one-field model for immiscible two-phase fluid that assumes that the density function of each phase moves with the center of local mass. In addition, the volume-weighted average method using the density function of the solid was applied to handle moving solid structures, and the CIP method was applied to the advection calculation to prevent numerical diffusion. To examine the analysis performance of the proposed SIB method, a numerical simulation was performed on an object falling to the free water surface. The numerical analysis result reproduced the object falling to the free water surface well.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.8 no.2
• /
• pp.130-136
• /
• 2005

Purpose: The aim of this study was to evaluate the correlation among descriptions regarding one's stool, Bristol stool form scale and colon transit time (CTT) in children with gastrointestinal symptoms, along with the clinical significance of Bristol stool form scale. Methods: 489 patients treated in the pediatric department of Severance hospital with gastrointestinal symptoms between May 2002 to May 2004 were included. We analyzed their age, sex, verbal descriptions of stool, Bristol stool form types, and CTT measured by Metcalf's method. Results: 116 children were under 5 years of age, 202 children between 5.1~10, and 171 children 10 years of age or older. Their mean age was $8.2{\pm}3.9years$. Stools were described as loose in 65 children (13.3%), normal in 221 (45.2%), hard in 188 (38.4%), and mixed (loose+hard) in 15 (3.1%). According to Bristol stool form scale, 57 children(11.7%) were classified as type 1, 66 (13.5%) as type 2, 203 (41.5%) as type 3, 109 (22.3%) as type 4, 36 (7.4%) as type 5, 18 (3.7%) as type 6, and 1 (0.2%) as type 7. Their mean CTT was checked $35.9{\pm}19.5hours$. Though no significant relationship was observed between age and CTT (p=0.4), a significant relationship was noted among patient's stool description, Bristol stool form scale and CTT (p<0.001). However, concordance between stool description and Bristol stool form was relatively low in the loose stool group (29%) and normal stool group (37%) while high in the hard stool group (87%). Conclusion: Bristol stool form scale could be used in the estimation of CTT in clinical practice.

• Progress in Medical Physics
• /
• v.9 no.2
• /
• pp.77-88
• /
• 1998

Wedge shaped isodoses are desired in a number of clinical situations. Hard wedge filters have provided nominal angled isodoses with dosimetric consequences of beam hardening, increased peripheral dosing, nonidealized gradients at deep depths along with the practical consequendes of filter handling and placement problems. Dynamic wedging uses a combination of a moving collimator and changing monitor dose to achieve angled isodoses. The segmented treatment tables(STT) that monitor unit setting by every distance of moving collimator, was induced by numerical formular. The characteristics of dynamic wedge by STT compared with real dosimetry. Methods and Materials : The accelerator CLINAC 2100C/D at Yonsei Cancer Center has two photon energies (6MV and 10MV), currently with dynamic wedge angles of 15$^{\circ}$, 30$^{\circ}$, 45$^{\circ}$ and 60$^{\circ}$. The segmented treatment tables(STT) that drive the collimator in concert with a changing monitor unit are unique for field sizes ranging from 4.0cm to 20.0cm in 0.5cm steps. Transmission wedge factors were measured for each STT with an standard ion chamber. Isodose profiles, isodose curves, percentage depth dose for dynamic wedge filters were measured with film dosimetry. Dynamic wedge angle by STT was well coincident with film dosimetry. Percent depth doses were found to be closer to open field but more shallow than hard wedge filter. The wedge transmission factor were decreased by increased the wedge angle and more higher than hard wedge filters. Dynamic wedging probided more consistent gradients across the field compared with hard wedge filters. Dynamic wedging has practical and dosimetric advantages over hard filters for rapid setup and keeping from table collisions. Dynamic wedge filters are positive replacement for hard filters and introduction of dynamic conformal radiotherapy and intensity modulation radiotherapy in a future.

• Journal of Korean Ophthalmic Optics Society
• /
• v.3 no.1
• /
• pp.93-101
• /
• 1998

The present study was conducted to investigate the structural changes in rat cornes. Sixty eyes from one-day-old uneyed rats, fourty eyes from 10-weeks-old adult rats were used. With the increase of age, the epithelial layer was thickened by the addition of new successive cellular layers. Then, the new-born rat's epithelial cells formed a pentagonal shape, and the quality of decidual cells showed a high electron-density, although the boundary between cells was distinctive. The newly produced cells showed a low electron-density so that there was the distinctive difference between light and darkness. In Bowman's layer, collagen fibrils demonstrate a regularly arranged structure along with the age. In stroma's layer, the density of keratocytes was decreased and thereby progressively flattened during the development. The collagenous layer of the adult rats was more distinctive than that of the new-born rats in a form of vertical and horizontal parallel alignment running vertically and horizontally. Descemet's membrane changed its structure significantly along with the age. It changed the shape from "banded-layer" to "non-banded layer" gradually. The thickness was also increased along with the age. Regardless of developmental stages, the endothelium is usually monolayer. During the developmental process, endothelial cells disappeared, so the density of endothelium was also decreased. The empty spaces were replaced by the expansion of adjacent cells.

• Korean Journal of Food Science and Technology
• /
• v.12 no.4
• /
• pp.229-234
• /
• 1980

Deep-fried instant noodle was prepared on a laboratory scale (150 units). A part of the noodle was packed in gas-proof laminated film bags with a small package of an oxygen scavenger made from Fe-powder and a 150 ml of air in each bag(Sample 1). Another part was packed in ordinary laminated film bags (Control), and the rest was vacuum-packed (74 mmHg) in the gas-proof film bags (Sample 2). All samples were placed in an incubator kept at $45.0{\pm}0.5^{\circ}C$ for 45 days. Oxygen-removing power of the scavenger, and peroxide and thiobarbituric acid values of the samples were determined regulary. The results of the study are as follows: 1. The residual oxygen concentration of the bags in Sample 1 decreased from the original 21% to less than 0. 5% after 48 hr. 2. POVs of Control, Samples 1 and 2 after 45 days were $12.4{\pm}0.4$, $5.7{\pm}0.2$ and $6.8{\pm}0.1\;meq/㎏$ fat respectively. It was noteworthy that the POV of Sample 1 did not change significantly during the storage period. The scavenger seemed very effective in retarding the POV development of Sample 1. 3. TBA values of Control, Sample 1 and 2 after 45 days were $1.31{\pm}0.04$, $0.60{\pm}0.04$, and $0.72{\pm}0.07$. As in the case of POVs, the samples packed with the scavengers exhibited consistently smaller TBA values than the vacuum-packed samples in later stages of the storage period.

• The Journal of Korean Academy of Prosthodontics
• /
• v.55 no.1
• /
• pp.61-70
• /
• 2017

In this case, the impression surface of the existing denture was scanned and was inverted three-dimensionally to express the residual ridge form. Implant planning was performed on the superimposed data of the CT with the scanned image of the denture with radiopaque markers attached. At the day of surgery, customized abutments fabricated in accordance with the form of the gingival margin were linked with fixtures and temporary restorations were set. In the process of fabricating the final prosthesis after the osseointegration of implant fixture, the intraoral scan images at abutment level were merged with images of the abutments scanned and stored before implant surgery. By fabricating the final prosthesis with the abutments obtained by merging can increase the marginal fitness of the final prosthesis and simplify the clinical process.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.49 no.2
• /
• pp.159-167
• /
• 2023

Titanium dioxide (TiO₂) is commonly used in sunscreen formulations to protect the skin surface and prevent the penetration of harmful ultraviolet (UV) rays by the physical scattering action of light. However, a disadvantage of using TiO₂ is that it can cause white turbidity when used on skin due to its inactive mineral ingredient. In addition, when TiO₂ particles are reduced to nanosize to eliminate opacity, they can increase the transmittance of visible light and reduce whitening, but may lead to serious skin problems, such as allergic inflammation. To overcome these issues, the bandgap of TiO₂ was controlled by adjusting the amount of oxygen defect and nitrogen amount, resulting in color TiO₂ tailored to the skin. This innovative technology can reduce the whitening phenomenon and effectively block blue light, which is known to cause skin aging by inducing active oxygen. The bandgap controlled TiO₂ compounds proposed in this study are hypoallergenic, broad-spectrum, and environmentally friendly. Furthermore, these compounds have been shown to significantly enhance sun protection factor (SPF) of sunscreens, demonstrating their compatibility with blue light blocking products.

• Journal of the Mineralogical Society of Korea
• /
• v.15 no.2
• /
• pp.122-131
• /
• 2002

Muscovite, chlorite and biotite in metapelites of the Ogcheon Hetamorphic Belt are studied using electron probe microanalysis (EPMA), backscattered electron images (BEI) of scanning electron microscopy (SEM) and lattice fringe images of transmission electron microscopy (TEM). These minerals are observed to be intergrown under a polarized light microscope and are apparently interlayered below EPMA resolution; EPMA data often indicate mixtures of phyllosilicates such as muscovite/chlorite (M/C), biotite/chlorite (B/C), muscovite/pyrophyllite/chlorite (M/P/C). biotite/pyrophyllite/chlorite (B/P/C) or biotite/muscovite/chlorite (B/M/C). BEI observations show that the three minerals (muscovite, chlorite and biotite) are mixed at various scales in a grain through the garnet zone, and the interlayering of the three minerals are observed from TEM lattice fringe images and selected area electron diffraction patterns. The result of TEM observations reveals that 7-$\AA$ layers (serpentine, precursor of chlorite) are interlayered within 10-$\AA$ layers (muscovite) at 100~200 $\AA$ scale as well as M/C in the chlorite zone. The 7-$\AA$ layers become smaller in size and less frequent in the biotite tone, and 10-$\AA$ layers are interlayered with chlorite (14 $\AA$) at an individual layer scale. The 7-$\AA$ layers are no longer observed in the garnet zone, and 10-$\AA$ layers (biotite) are interlayered with chlorite (B/C) at 50~100 $\AA$ scale. Relatively large scale (1000~2000 $\AA$) of intergrowth is also frequently observed from the garnet zone samples. However, rocks from all three metamorphic zones show interlayering of a few units of 7-, 10- and 14-$\AA$ layers with each other at TEM observations. The result of this study implies that metamorphic minerals such as muscovite, chlorite and biotite form through disequilibrum mineral reactions resulting in inhomogenious phases.