• Journal of the Korea Institute of Military Science and Technology
• /
• v.10 no.2
• /
• pp.84-89
• /
• 2007

MIL-STD-461E, EMI military standard for the equipment and subsystems, requires reception characteristic tests to verify the susceptibility of a receiver against the jntermodulation and spurious signals. Because the CS103 and CS104 of MIL-STD-461E show the test configuration of the equipment unit like a traditional receiver, it is possible to verify the susceptibility only for the reception signal through analog filters. However, at present when software programming techniques make a progress, the CS103 and CS104 tests need to evaluate the reception signal of the subsystem which includes both the digital filtering effects and analog filter characteristics. These test and evaluation techniques applied to a surveillance radar subsystem. This paper researched the EMI test methods in order to confirm feasibility of these test and evaluation techniques. Also the test results are compared and analyzed.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2009.04a
• /
• pp.47-50
• /
• 2009

본 논문에서는 불균질 재료의 균열진전을 해석하기 위한 방법으로 변절점 유한요소를 이용한 멀티스케일 기법을 제시하였다. 효율적인 해석을 위하여 서로 다른 스케일의 요소망을 적용하여 전체 모델의 자유도를 감소시킨다. 균열선단과 비교적 멀리 떨어져 있는 영역은 균질화 기법을 도입하여 불균질 재료에 대한 등가물성을 갖는 성긴 요소망으로 대체하고, 균열선단 주변의 요소망은 재료의 기하학적 특성과 불균질성을 반영하도록 조밀하게 구성한다. 한편 균열선단에 존재하는 응력 특이성을 표현하기 위하여 균열선단을 포함한 요소를 더욱 조밀한 요소망으로 분할하여 구성한다. 여기에서 서로 다른 스케일의 요소망 경계에는 변절점 유한요소를 적용함으로써 경계에서의 절점 연결조건과 적합성을 만족시킬 수 있다. 제시한 멀티스케일 기법을 수치예제에 적용함으로써 정확성과 효율성을 검증하였으며, 특히 불균질 성분이 균열진전에 미치는 영향을 경계조건과 T-응력의 관점에서 분석하였다.

• Journal of the Korean Ceramic Society
• /
• v.39 no.10
• /
• pp.970-976
• /
• 2002

In this paper, the slump flow of the concrete, suspension, pH, corrosion effect, bleeding and the characteristics of coompressive strength were analyzed using antiwashout underwater admixture and antiwashout underwater agent+corrosion inhibitor mixed admixtures(1type). The results showed that there were no rare difference in physical properties but in the results of rapid corrosion tests there were lots of corrosion inhibitor ratio differences between concrete using only antiwashout underwater admixture and the corrosion inhibitor mixed(1type). In the case of only antiwashout underwater admixture 5.4%, the case corrosion inhibitor mixed(1type) 0.07%, the Antiseawater of the concrete which uses the Corrosion Inibitor Mixed(1type) appeared highly.

• Applied Chemistry for Engineering
• /
• v.21 no.3
• /
• pp.317-322
• /
• 2010

In this study, poly(methyl methacrylate) (PMMA) was treated with changing mixing ratios of $F_2$ and $O_2$ using oxyfluorination method for hydrophilic modification of PMMA film. For the characterizations of oxyfluorinated PMMA surface, contact angle, surface free energy, X-ray photoelectron spectroscopy (XPS) and optical transmittance (UV-vis) were carried out. After the oxyfluorination, PMMA surface became more hydrophilic showing the decrease of water contact angle from $69^{\circ}$ to $44^{\circ}$. So, surface free energy of oxyfluorinated PMMA film was increased from 46 to $58\;mN\;m^{-1}$. These results are attributed to hydrophilic functional groups such as hydroxyl group formed oxyfluorination method on the PMMA surface. From XPS results, it was confirmed that O/C concentration ratio on the surface of PMMA was increased, the amount of C-OH bonding which shows hydrophilicity was also largely increased from 6.7 to 24.8% with increasing fluorine partial-pressure via the oxyfluorination, The oxyfluorination conditions, room temperature, 1 bar with one mixture ratio of $F_2$ to $O_2$ had little influence on optical transmittance properties of PMMA film but enhanced its surface hydrophilicity. This result suggests that oxyfluorination method could be useful to change hydrophobic PMMA surface to hydrophilic.

• Economic and Environmental Geology
• /
• v.40 no.6
• /
• pp.739-749
• /
• 2007

The seismic velocity at the formation varies widely with physical properties in the layers. These features on seismic shot gathers are not capable of reproducing normally by numerical modeling of homogeneous medium, so that we need that of random inhomogeneous medium instead. In this study, we conducted Gaussian autocorrelation function (ACF), exponential autocorrelation function and von Karman autocorrelation function for getting inhomogeneous velocity model and applied a simple geological model. According to the results, von Karman autocorrelation function showed short wavelength to the inhomogeneous velocity medium. For numerical modeling for a gas hydrate, we determined a geological model based on field data set gathered in the East sea. The numerical modeling results showed that the von Karman autocorrelation function could properly describe scattering phenomena in the gas hydrate velocity model which contains an inhomogeneous layer. Besides, bottom-simulating-reflectors and scattered waves which appear at seismic shot gather of the field data showed properly in the inhomogeneous numerical modeling.

• Applied Chemistry for Engineering
• /
• v.29 no.3
• /
• pp.312-317
• /
• 2018

In this study, activated carbon fibers (ACFs) were treated by oxy-fluorination to improve the adsorption property of benzene gas, one of the gases causing sick house syndrome. Surface properties and pore characteristics of oxyfluorinated activated carbon fibers were confirmed by X-ray photoelectron Spectroscopy (XPS) and Brunauer-Emmett-Teller (BET), and adsorption properties of benzene gas were evaluated by gas chromatography (GC). As a result of XPS data, it was confirmed that the fluorine functional groups on activated carbon fibers surface increased with increasing the fluorine partial pressure. The specific surface area of all samples decreased after the oxyfluorination treatment, but the micropore volume ratio increased when the fluorine partial pressure was at 0.1 bar. The oxyfluorinated activated carbon fibers adsorbed 100 ppm benzene gas for an 11 h, it was found that the adsorption efficiency of benzene gas was improved about twice as much as that of untreated ones.

• ETRI Journal
• /
• v.14 no.4
• /
• pp.210-216
• /
• 1992

불요 전자파 제거용 필터의 유전체로 사용되는 Zirconium Titanate 세라믹 유전체에서 $MoO_2$ 함유량과 소결온도에 변화를 주어 이들이 유전특성에 미치는 영향에 대하여 검토하였다. 일반적으로 $MoO_2$ 함유량보다는 소결온도의 변화가 유전률, 품질계수 및 소결밀도 등에 더 큰 영향을 주었으며, 정전용량의 온도계수 측면에서는 $MoO_2$ 함유량을 제어하여0ppm$^\{circ}C$근처로 이동시켜 상당히 안정된 온도 특성으로 개선할 수 있었다.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1995.06a
• /
• pp.96-99
• /
• 1995

본 연구는 특징 파라메터의 특성을 고려한 신경회로망에 관한 연구로서 패턴블럭 선택적 신경회로망을 제안하고, 제안한 신경회로망의 성능을 평가하기 위하여 한국어 단모음에 대한 불특정 화자 인식 실험을 하였다. 각 패턴에 따른 특징 파라메터의 변화를 고려하지 않은 기존의 패턴매칭 알고리즘에 비하여 제안된 신경회로망은 인가된 패턴을 파라메터의 특성에 맞게 몇 개의 부패턴으로 분할한 후 가장 최적의 부패턴을 선택하여 학습하고 인지하는 것이 그 특성이다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.16 no.7
• /
• pp.598-609
• /
• 1991

A generalized expression of radiation intensity from multiple non linear transmission lines is derived from the circuit model of radiation phenomena and the phased array antenna theory, for PC traces having independent signal sources. An adequacy of this proposed analitical method was verified comparing with computer simulation and experimental result for two and three non linear transmission lines feeded by 600 MHz signal.

• Journal of Convergence for Information Technology
• /
• v.9 no.4
• /
• pp.152-159
• /
• 2019

The purpose of this study is to investigate the effect of transaction characteristics on transaction cost and choice intention by applying transaction cost theory to experiential product. Experience-specificity, transaction uncertainty, and personal uncertainty are proposed to reflect the characteristics of experiential products, and the effects of these variables on transaction costs and transaction costs are assumed to have an influence on the choice intention. The results of this study are summarized as follows. First, experience-specificity(site, physical equipment, knowledge skill, temporal), transactional uncertainty(product-, process-), personal uncertainty (preference-, and situation-) have a significant positive effect on transaction cost. Second, transaction costs (search, comparison, examination, negotiation, payment, delivery) have a significant negative effect on the choice intention of the experiential product. The results of this study show that the increase of transaction costs can reduce the choice of experiential products and the strategic consideration of experience specificity, transaction uncertainty and individual uncertainty are required to reduce transaction costs. In addition, experiential products lacked access from a transactional and cost-based point of view, and this study contributes theoretically by compensating for the lack.