• Proceedings of the Korean Geotechical Society Conference
• /
• 2001.10a
• /
• pp.185-198
• /
• 2001

암반 불연속면에 대한 조사는 국제 암반역학회(ISRM)에서 추천하는 조사법이 합리적으로 불연속면이 특성을 기재할 수 있는 방안이기 때문에 널리 적용되고 있다 그러나, 이 안에서는 조사결과를 공학적 의미가 있는 암반특성치로 변환하는 방안에 대한 언급이 없다. 본고에서는 지질기술자들이 불연속면조사시 주로 사용하는 ISRM 추천안인 제시한 조사항목에 토목기술자들이 주로 사용하는 RMR 혹은 Q-system 분류안의 정량적인 값을 적용할 수 있을 지를 검토하였다. 이에 대한 관련기술자들의 관심이 모여질 때 정량적인 인자에 기초한 ISRM 조사법에 부합되는 암반분류안의 구축도 가능하리라 생각된다.

• The Journal of Engineering Geology
• /
• v.16 no.1 s.47
• /
• pp.23-30
• /
• 2006

This study was carried out to understand the relationship between orientation of tecto-lineaments obtained from aero-photograph and orientation of discontinuities measured at field for the rock types of igneous, sedimentary and metamorphic rocks in Andong area. Total 847 tecto-lineaments were extracted from the aero-photographs and total 1,940 discontinuities including joints, foliations and faults were measured during geologic survey. By using the software DIPS, preferred trends of tecto-lineaments were deduced as N30E-N40E for igneous rocks and N50E-N60E for both sedimentary and metamorphic rocks, while the trends of discontinuities were found as N40E-N50E for igneous rocks, N50E-N80E for sedimentary rocks and N50E-N60E for meta morphic rocks. Even though both orientations for a given rock type showed relatively good agreement in its trend, some discrepancy is also appeared. Since construction safety of geo-structures such as tunnel and slope, etc., is significantly affected by the orientation of discontinuities in rock masses, it is highly recommended to perform a detailed geologic survey as well as an aero-photograph interpretation at a design stage.

• Proceedings of the KSEG Conference
• /
• 2004.03a
• /
• pp.11001-11050
• /
• 2004

불연속면 또는 단열은 암반 내의 역학적 분리면을 통칭하는 것으로서 암반 내의 작은 흠집이나 물리적으로 불균질한 곳이나 불연속면 주위에 응력이 집중되어 초래되는 변형의 결과이다. 불연속면은 정압, 지체구조적, 그리고 열적 응력 및 높은 수압에 반응하여 형성되며, 아주 미세한 것부터 대륙 규모에 걸쳐 다양한 크기로 발달한다. 불연속면은 연속체로서의 암반을 물리적으로 분리시키기 때문에 그 자체로서 역학적인 약대에 해당되고, 지하수의 유동 통로의 기능도 하기 때문에 지질공학, 지반공학 및 수리지질학 실무에서 매우 중요한 요소로 작용한다. 경제적으로 중요한 석유, 지열 및 수자원 저류체 역시 단열 암반 내에 형성된다. 불연속면은 오염물질의 이동과 분산을 제어할 뿐만 아니라 암반을 기초로 하거나 대상으로 하는 공학적 구조물과 굴착의 안정성에도 역시 영향을 미친다. (중략)

• The Journal of Engineering Geology
• /
• v.11 no.3
• /
• pp.303-313
• /
• 2001

A cut-slope near Guam-Ri Hwado-Eup Namyangju-Si Kyunggi-Do collapsed during a heavy rainfall over 400mm at 28th of August 2000. The cut-slope collapse reportedly developed mainly by block sliding along a set of discontinuities, although slope angle of the cut-slope was 40$^{\circ}$(1:1.2) that agrees with the road construction criteria. This study aims to analyze differences and correlations among several data-collecting methods limited to discontinuity analysis related with cut-slope collapse. This study started with analysing discontinuity surface characteristics, geology of the country rock and orientations of the discontinuities directly related with the collapse. Analysis of aerial photos around the study area provided regional lineament data, and discontinuity plane description and measurements were collected from core logging and Borehole Image Processing System (BIPS). Spearmans correlation ranking coefficient method was used to get correlation of discontinuity planes according to analysis methods. The result suggests that the correlation coefficient is ${\gamma}_s$ = 0.91 Plus, stability analysis of discontinuity plane orientation data using equal-area stereonet revealed that the study area is unstable to planar failure. This study suggests that the cut-slope angles currently applied should be shallower and that significant attention is required to orientation distribution of discontinuities existed in cut-slopes studies.

• The Journal of Engineering Geology
• /
• v.17 no.4
• /
• pp.535-544
• /
• 2007

Discontinuities developed in a sedimentary rock mass are the most important factor to determine mechanical properties of the rock mass. Parameters described discontinuities in rock mass generally connote heterogeneity and uncertainty. In this study, probabilistic statistics method was used to determine parameters of discontinuities quantitatively and objectively. The field survey was conducted at 33 sedimentary rock slopes in Ulsan area, according to the suggested methods for the quantitative description of discontinuities in rock mass(ISRM, 1978). The engineering geological characteristics of the sedimentary rocks at Ulsan area was determined as probability distribution function deduced by analyzing parameters of discontinuities.

• Tunnel and Underground Space
• /
• v.17 no.3 s.68
• /
• pp.165-174
• /
• 2007

The technique, which reproduces the figures of objects from measured data of the objects using 3-D laser scanner, is called reverse engineering. Recently, research studies into applications of reverse engineering to rock engineering are increasing in number, in the discontinuity surveys for rock slopes out of man's reach, or rapid discontinuity surveys for wide range areas. For analysis of discontinuity using reverse engineering, a program for processing point clouds data from the 3-D laser scanner, for sampling from these point clouds data, and finally analyzing the discontinuity is needed. However, existing programs rarely have sufficient functions to properly analyze the discontinuities. In this study, a program was developed, which can automatically sample discontinuities from the point clouds data which measured in a rock slope using a 3-D laser scanner, and which can also undertake statistical analysis of the discontinuities. This developed program was verified by the application of discontinuity surveys in a rock slope and a tunnel. By undertaking the discontinuity survey using a 3-D laser scanner and the developed program, the feasibility and rapidity of such surveys is expected to improve in areas out of man's reach in geotechnical surveys. Taking into consideration the fact that the international level of related techniques is at a rudimentary stage, the possibility of prior occupation of a broad market is also expected.

• Journal of the Korean Geotechnical Society
• /
• v.16 no.4
• /
• pp.63-70
• /
• 2000

The quantitative analyses and the mechanical interpretation of discontinuity planes are the most important factor for the study of strength and deformation properties of rock masses containing discontinuity planes. However, the relationship between the factors investigated in the field and the actual mechanical properties of discontinuity planes is not fully understood. The main purpose of this study is to investigate the effects of density, length, and spacing of joints on elastic modulus of rock masses as these values vary. A new parameter which has a direct relation with the elastic modulus of discontinuity planes is also preposed in this study. The combination of finite element methods and homogenization methods has been used for the numerical analyses of a uintcell with discontinuity planes, which is generated using random-number generation methods. The elastic modulus of the discontinuity plane is found from the numerical analyses. The final results propose not only the relation between the investigation parameters of discontinuity planes and the elastic modulus of rock masses but also a new parameter, an effect area ratio having a linear relation with the elastic modulus of rock masses.

• Proceedings of the KSEG Conference
• /
• 2005.04a
• /
• pp.157-164
• /
• 2005

BIPS와 Televiewer를 이용하여 10개의 지하수 관측공에서 획득된 1,591개 불연속면을 분석하여 지하수 유동과의 관계를 비교${\cdot}$분석하였다. 연구지역 내의 지형은 산계가 잘 발달된 계곡형 지형이며, 수계의 발달은 매우 미약하다. 연구지역 주변에는 북북동-남남서 방향의 양산단층과 동래단층이 발달되어 있으며, 연구지역 내에는 EW방향의 선구조도 발달되어 있다. 지하수공내에서 조사된 불연속면의 주 방향은 위성사진에서 판독된 선구조의 방향과 대부분 일치한다. 지구통계기법을 이용하여 작성된 지하수위 등고선도에서 추정된 지하수 유동방향과 유향${\cdot}$유속기에서 측정된 지하수 유향은 거의 일치하지만, 단열암반에 발달된 불연속면의 방향과 지하수 유동방향은 2가지로 해석되었다. 첫째는 단열암반에 발달된 불연속면의 방향과 지하수 유동방향이 잘 일치하는 경우(BH-01, 03, 04, 12공), 둘째는 불연속면의 방향과 지하수 유동방향이 잘 일치하지 않는 경우(BH-02, 05, 07, 11) 이다. 지하수 유동방향이 불연속면의 방향과 일치하지 않는 경우는 지형의 변화에 더 영향을 받는 것으로 나타났다. 따라서 단열암반 내에서 지하수의 유동은 단열의 방향성에 영향을 받지만, 지형의 특성에도 큰 영향을 받는다.

• The Journal of Engineering Geology
• /
• v.13 no.3
• /
• pp.321-334
• /
• 2003

This study is aimed at the effective measurement plan of discontinuity orientation on rock mass. The discontinuity orientation is expressed as three methods. strike/dip. dipdirection/dip (a three digit number / a two digit number) and right hand rule. Generally, strike/dip is measured with clinometer. and dipdirection/dip with silva compass(type15). A sign of strike/dip. discontinuity orientation is used to geological survey. and dipdirection/dip to engineering. Dipdirection/dip converted by strike/dip measured with clinometer is useful on the statistical analysis of a lot of data. To measure the azimuth of the dip with clinometer and to change strike/dip to dipdirection/dip may have potential errors in each person. The newly designed apparatus, clinometer equipped by a rotational azimuth plate and an arrow to measuring strike and dipdirection, has been developed to measure effectively the discontinuity orientation with two method (strike/dip and dipdirection/dip). The measuring method of discontinuity orientation with clinometer having newly designed apparatus is effective one for accurate measurement of strike as well as dipdirection which is degrees counted clockwise from true north. Used by clinometer with newly designed apparatus, concurrent measuring strike/dip and dipdirecton/dip of discontinuity is possible. In application to measuring discontinuity orientation on rock slope, it has been recognized that the newly designed method, unambiguously, led to drop measuring errors comparing with existing measuring apparatuses. Therefore, it is considered that measuring method of discontinuity orientation (strike/dip and dipdirecton/dip) by the newly designed apparatus is useful to one in geological engineering investigation of road design, and to unskilled investigator.

• Tunnel and Underground Space
• /
• v.15 no.1 s.54
• /
• pp.47-54
• /
• 2005

One of the standard procedures of discontinuity survey is the joint set identification from the population of field orientation data. Discontinuity set identification is fundamental to rock engineering tasks such as rock mass classification, discrete element analysis, key block analysis. and discrete fracture network modeling. Conventionally, manual method using contour plot had been widely used for this task, but this method has some short-comings such as yielding subjective identification results, manual operations, and so on. In this study, the method of discontinuity set identification using genetic algorithm was introduced, but slightly modified to handle the orientation data. Finally, based on the genetic algorithm, we developed a FORTRAN program, Genetic Algorithm based Clustering(GAC) and applied it to two different discontinuity data sets. Genetic Algorithm based Clustering(GAC) was proved to be a fast and efficient method for the discontinuity set identification task. In addition, fitness function based on variance showed more efficient performance in finding the optimal number of clusters when compared with Davis - Bouldin index.