• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.247-247
• /
• 2018

공학이나 과학에서 다루는 거의 모든 현상이나 물체는 시공간적으로 연속성을 지니고 있으며, 지형이나 지하수위분포가 대표적인 사례에 해당한다. 강수량 분포 또한 지역적인 스케일을 고려할 때 연속성을 지니고 있다고 가정될 수 있다. 이러한 연속성을 지닌 현상이나 물체를 연구 대상으로 취할 경우, 모든 위치에서의 관찰 값이나 계산 값을 얻기란 불가능하므로, 불연속적이거나 이산적인 위치에서 불연속적인 값을 얻게 된다. 이러한 시공간적으로 이산적이고 불연속적인 자료를 바탕으로 어떠한 작업을 수행하고자 할 때 자료의 연속성을 가정하게 되며, 따라서 연속성을 가정하고 내삽 처리된 근사값을 이용하게 된다. 따라서 불연속적인 자료의 내삽 처리 과정이 연구 결과의 성패를 좌우할 만큼 매우 중요할 수 있다. 하지만 대다수의 연구자나 실무자들은 내삽 처리의 중요성을 간과하고 있으며, 자료처리나 준비 과정에서 거쳐야하는 하나의 단순한 단계로만 여길 뿐이다. 따라서, 본 연구에서는 역거리 가중치법(Reciplocal Inverse Distance method), 역거리 제곱 가중치법(Inverse Square Distance method), Dual Kriging법, Hardy의 Multiquadric법, Completely Regularized spline법, 삼각망법(TIN) 등 기존에 알려진 공간자료 보간법에 대해서 소개하며, 알려져 있는 공간함수를 이용하여 다양한 경우에 대한 비교, 분석을 수행한다. 보간법의 종류에 따라 내삽 결과는 매개변수 값에 지대한 영향을 받을 수 있기 때문에, 매개변수에 따른 내삽 결과를 분석하고, 정확성과 적용성 등 다양한 내삽기법들에 대해서 평가한다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.24 no.5
• /
• pp.577-588
• /
• 2011

This paper provides a novel extended Moving Least Squares(MLS) difference method for the potential problem with weak and strong discontinuities. The conventional MLS difference method is enhanced with jump functions such as step function, wedge function and scissors function to model discontinuities in the solution and the derivative fields. When discretizing the governing equations, additional unknowns are not yielded because the jump functions are decided from the known interface condition. The Poisson type PDE's are discretized by the difference equations constructed on nodes. The system of equations built up by assembling the difference equations are directly solved, which is very efficient. Numerical examples show the excellence of the proposed numerical method. The method is expected to be applied to various discontinuity related problems such as crack problem, moving boundary problem and interaction problems.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.4 no.1
• /
• pp.71-78
• /
• 2002

In this study, the influence of the presence of discontinuity planes on the load transfer mechanism and the pattern of loosening zone was studied based on the laboratory test. The trap-door and the reaction plates are installed as the bottom plane of the model box. The vertical discontinuity plane is installed in the dry sand. Various overburden heights and locations of discontinuity planes are applied as major factors in this study. The results show that at higher overburden heights over about 1.5 times the excavation width, the ratio of the transferred stress to the insitu stress converges to a certain value even if the overburden height increases further. The results also show that the discontinuity plane gives relatively larger influence on the load transfer mechanism, that produces the unsymmetrical load concentration, when the discontinuity plane locates within the tunnel width. When the discontinuity plane locates outside the tunnel width, the unsymmetrical load concentration is reduced considerably.

• Tunnel and Underground Space
• /
• v.11 no.2
• /
• pp.167-173
• /
• 2001

The joint model has influence on the results of discontinuum analysis. In this study the results of discontinuum analysis with Barton-Bandis joint model(BB model) and with Mohr-Coulomb joint model(MC model) are compared. The results of continuum analysis under the same condition are compared with the results of discontinuum analysis to investigate the behavior of rockmass around tunnel. The result of continuum analysis and that of discontinuum analysis with BB model show similar distribution of displacement and stress. On the other hand, the discontinuum analysis with MC model shows different displacement distribution and stress distribution. Moreover, the displacement and minor principal stress of the discontinuum analysis with MC model are smaller than those of continuum analysis, although the joints are explicitly considered in the discontinuum analysis. These results are originated from the limitation of MC model in simulating joint deformation behavior, especially the assumption of constant dilation jingle independent of it)int 7hear displacement.

• Journal of the Korea Institute of Building Construction
• /
• v.16 no.5
• /
• pp.397-403
• /
• 2016

As a building energy saving standard strengthened, The number of building installed external thermal insulation composite system(ETICS) using EPS insulation increased. But frequent fire accident in the buildings installed EIFS using EPS led to strengthening of building fire safety regulation. This study is for fire property of EPS ETICS reinforced with noncombustible calcium silicate-based mineral insulation as a fire spread prevention structure(FSPS). Fire test for large scale wall by ISO 13785-2 was applied and results showed EPS EIFS with FSPS got 3~8 times superior fire safety than normal EIFS by visual investigation. Temperature and heat flux measurement results, which data of upside of specimen were lower than downside, also supported fire safety of EIFS with FSPS.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2001.05a
• /
• pp.97-101
• /
• 2001

Composite materials have been applied widely in interior panels of buildings and transport vehicles. Recently good fire performance and weight reduction are key issues in the fields. In the present study we investigated effects of processing parameters on the performance of honeycomb sandwich panels, especially peel strength of the panel and fire performance. The processing parameters considered were types of matrix resin, resin contents, panel cure conditions, and surface painting process conditions. The results showed that the higher resin content provides the better peel strength. Controled cure steps are also needed to obtain good pee] strength. Paint processing parameters including base putty thickness and paint drying conditions and paint thickness are important to obtain good paint adhesion and good fire performance.

• Journal of the KSME
• /
• v.33 no.7
• /
• pp.636-647
• /
• 1993

평판과 셸은 그 하중 지지의 효율성 때문에 각종 구조물에 널리 사용되고 있다. 그러나 여러 종류의 불연속은 어쩔 수 없이 존재하게 된다. 대형 구조물의 출입을 위한 개구부의 존재나, 관과 노즐의 결합 부위 등 복잡한 형상을 가지면서 생기는 기하학적 문제, 재료에 원래 존재하는 균 열이나 개재물(inclusion) 등의 문제가 그 예가 될 것이다. 집중하중이나 선하중 등은 넓은 의미의 불연속으로서 힘에 의한 것으로 볼 수 있으나, 보다 문제가 되는 것은 변위의 불연속으로 이해될 수 있는 균열의 문제일 것이다. 이균열의 존재는 구조물의 안전성에 미치는 효과가 커서 중요한 연구 대상이 되어 있다. 또 해석적 방법으로 풀기도 까다로운데, 여기서는 이 문제를 다루는 해 석적 방법들을 살펴보고, 또 효율적으로 계산할 수 있는 반해석적(semi-analytical) 방법을 도입한 수 대표적인 평판과 셸 문제를 예로 들어본다.

• Tunnel and Underground Space
• /
• v.5 no.1
• /
• pp.11-21
• /
• 1995

일반적으로 NATM공법에서 지보의 설계는 암반반응곡선의 개념을 통해 수행된다. 그러나 암반반응곡선은 암질이 좋고 과지압에 의한 문제가 심각하지 않은 지역에 적용되며, 따라서 주로 불연속면에 의해 암반의 거동이 영향을 받는 지역에서는 시공과정에 직접 적용하기가 힘들다. 본 연구에서는 암반 블록에 대한 블록반응곡선을 연구하여, 블록반응곡선상에서 지보를 설계하였다. 각각의 차분시각에서의 변위와 응력을 얻기위해서 개별요소 프로그램인 UDEC을 사용하였다. 블록은 Mohr-Coulomb 모델이며, 불연속면은 Barton-Bandis 모델이다. 블록과 불연속면의 물성은 실험실 실험을 통하여 구하였다. 블록반응곡선을 이용한 지보설계과정을 이해하기 위하여 간단한 모델분석을 실시하였다. 동일한 형상의 키블록이 공동의 천장, 측벽, 바닥에 존재할 경우, 각 블록의 안정성 판단 및 지보의 설계를 실시하였다. 또한 초기지압의 영향을 알아보기 위하여, 측압계수(K)를 달리하여 해석해보았다. 현재 건설중인 공동에 대한 안정성 판단 및 지보설계를 블록반응곡선을 이용하여 설계하였다.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2004.04a
• /
• pp.258-261
• /
• 2004

This paper contains the tension-tension, the tension-tension bearing and the tension-tension steel bolt joint fatigue characteristics of glass fabric/phenol composite laminates. The experimental results show that the bearing and the steel bolt joint fatigue characteristics of the material is so excellent compared with the simple tension fatigue characteristics, that there are no needs of additional strengthening for mechanical joint parts when the parts are properly designed.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.4 no.1
• /
• pp.89-95
• /
• 2009

The current enforce decree of "The Act on the Promotion of Construction Waste Recycling" divides seventeen kinds of construction wastes by property and configuration. Mixed construction waste, one of them classified by the enforce decree, is composed two more than justified construction wastes except refuse soil and rock. In construction wastes justified by enforce decree of this law, most refuse concrete and asphalt concrete of construction wastes are recycled. As well as refuse metal is separated, sorted from bulk them, and merchandised for value. Finally this is used the secondary manufactured products. Even though combustible construction wastes like refuse wood, plastics, fiber can be recycled RDF(Refuse derived fuel) or RPF(Refuse plastic fuel) because of high caloric value and low heavy metal but most of them are discharged as mixed construction waste and then treated by treated by incineration and landfill. Therefore, to control construction waste flow efficiently, construction wastes are classifies first combustible, incombustible, mixed combustible, incombustible and etc. in this study. The combustible waste is consisted refuse wood, plastics, fiber and etc. and incombustible waste contains refuse concrete, asphalt, and etc. Mixed construction is construction waste that can not separate from mixed waste bulk with different kinds.