• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1995.09a
• /
• pp.211-219
• /
• 1995

블록-삼각(Block-angular)구조를 갖는 선형 제약식과 분리되지 않는 콘벡스 목적함수의 대규모 비분리 콘벡스 최적화 문제의 해법으로 번들-분해법 (Bundle Based Decomposition)을 이용한 알고리즘 SQA(Separable Quadratic Approximation)은 비분리 콘벡스 프로그램을 분리가능한 2차계획 법(Separable Quadratic Programming) 문제로 근사화시켜 번들-분해법을 축 차적으로 적용한다. 본 연구는 수렴성(local convergence & global convergence) 및 알고리즘 구현 [1]에 이어 이에 대한 수치적용 결과를 중심 으로 소개한다. 수치 적용은 ANSI C로 작성된 SQA 프로그램을 SUN SPARC II에서 실행하였으며 이때 대규모 비분리 최적화 문제의 비분리 목 적함수와 블록-삼각 구조의 선형 제약식들이 계수들은 ANSI C의 랜덤함수 로부터 임의의 값들을 이용하였다. 이와같은 다양한 비분리 콘벡스 최적화 문제에 대한 수렴성, 반복회수 및 처리시간등의 결과와 함께 GAMS/MINOS 의 최적해를 소개한다.

• Journal of Biomedical Engineering Research
• /
• v.16 no.4
• /
• pp.395-402
• /
• 1995

The intravoxel spin phases in magnetic resonance imaging (MRI) usually vary due to susceptibility differences of materials to be imaged. The phase variation in the voxel results in a reduction of the signal intensity. This signal intensity reduction is known as the susceptibility effect in MRI and has been studied extensively. In this paper, a new spectral decomposition technique Is proposed and the signal change due to the susceptibility effect can be analyzed. A pulse sequence for the spectral decomposition of the susceptibility was developed and applied to susceptibility imaging of venous blood possessing paramagnetic properties. The computer simulations and their corresponding experimental results obtained using both a phantom and human volunteers are reported. Key words : susceptibility effect in MRI : spectral decomposition of susceptibility effect.

• Proceedings of the Korean Reliability Society Conference
• /
• 2011.06a
• /
• pp.311-318
• /
• 2011

모호집합은 인간의 추론에 내재하는 모호성을 정형화한 것이다. 네트워크 신뢰도를 계산할 때, 각 링크의 확률이 모호수로 정의될 때의 신뢰도를 구하는 알고리즘을 설명하였다. 알고리즘은 분해법을 적용하는 것인데, 모호수의 연산을 포함한다. 분해법을 할 때 키스톤 부품을 시점으로 부터 하나씩 선택하여 분해한다. 이러한 방법은 키스톤 부품을 선택하는 기준이 필요 없으므로 간단하게 만든다. 분해에 의해서 두 개의 하위 문제가 생성되고 원 문제와 재귀관계를 수립할 수 있다. 재귀 알고리즘은 컴퓨터 프로그램을 간단하게 만든다.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.32 no.12
• /
• pp.427-434
• /
• 1983

Singular Value Decomposition of 2-D Finite Impulse Response was used to design a variable cutoff 2-D FIR filters. Basically this approach allows to use 1-D techniques while dealing with 2-D filters. In this paper, our aim is to provide away of easily tuning 2-D FIR filters. For example, one would like to adjust interactively the cutoff frequency of a 2-D Circular Symmetric low-pass filter on an image processing system. The decomposition of 2-D FIR filters along with techniques available for tuning 1-D FIR filters allows such adjustment. Several design examples are shown.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.11
• /
• pp.1455-1461
• /
• 2018

This paper presents a kernel analysis of weighted linear interpolation based on even-odd decomposition (EOD). The EOD method has advantages in that it provides low-complexity and improved image quality than the CCI method. However, since the kernel of EOD has not studied before and its analysis has not been addressed yet, this paper proposes the kernel function and its analysis. The kernel function is divided into odd and even terms. And then, the kernel is accomplished by summing the two terms. The proposed kernel is adjustable by a parameter. The parameter influences efficiency in the EOD based WLI process. Also, the kernel shapes are proposed by adjusting the parameter. In addition, the discussion with respect to the parameter is given to understand the parameter. A preliminary experiment on the kernel shape is presented to understand the adjustable parameter and corresponding kernel.

• The Journal of Natural Sciences
• /
• v.1
• /
• pp.47-59
• /
• 1987

The thermal decomposition mechanism of BaTiO($$C_2$$O_4$)_2$ $4H_2$O has been investigated employing TG, DTG, and DTA techniques. The intermediate compounds and the gaseous products of decomposition were examined by IR spectrometer and X-ray analyser. The decomposition proceeds through five steps. The first step which is the dehydration of the tetrahydrate is followed by the decomposition of oxalate groups. During the second decomposition, half a mole of carbon monoxide is evolved. The oxalate groups are completely destroyed in the range $260~460^{\circ}C$, resulting in the formation of a carbonate which retains free carbon dioxide in the matrix . the final decomposition of the carbonate takes place between $650~750^{\circ}C$ and yields $BaTiO_3$.

• Analytical Science and Technology
• /
• v.16 no.2
• /
• pp.152-158
• /
• 2003

This study was conducted to evaluate two sample digestion procedures and instrumental determination parameters for analysis of lead in bone. Amputated human legs were treated by acid digestion or microwave dissolution prior to spectrometric analysis. Inductively coupled plasma mass spectrometry (ICP-MS) and graphite furnace atomic absorption spectrometry (GF-AAS) were used for determining bone lead levels. Recovery efficiencies using standard reference material from acid digestion measured by ICP-MS were in good agreement with those of the certified value, but in cases of acid digestion by GF-AAS and microwave digestion by both two methods, recovery underestimated and overestimated, respectively. For the bone samples, the lead concentrations obtained by ICP-MS after acid digestionwere in good agreement with those by GF-AAS (correlation coefficient = 0.983), but GF-AAS gave systematically higher values than ICP-MS. While a good agreement between two analytical methods after microwave digestion was also obtained (correlation coefficient = 0.950), bone lead concentrations from microwave were relatively higher than those from acid digestion. In conclusion, the use of the simple nitric acid digestion procedure at an ambient temperature coupled to ICP-MS seems to be efficient for the determination of lead in bone in consideration for both the convenience and validity.

• Journal of the Korean Ceramic Society
• /
• v.37 no.10
• /
• pp.962-967
• /
• 2000

산소 결핍 페라이트 (oxygen deficient ferrites, ODF) MF $e_2$ $O_{4-}$$\delta$/는 약 30$0^{\circ}C$의 낮은 온도에서 온실가스중 하나인 $CO_2$를 C와 $O_2$로 분해시킨다. 본 연구에서는 $CO_2$분해 촉매로서 3원계 초미세 페라이트 N $i_{x}$Z $n_{1-x}$F $e_2$ $O_4$와 N $i_{x}$ $Co_{1-x}$F $e_2$ $O_4$를 수열합성법과 공침법 등의 습식 합성법으로 각각 합성하여 이들 분말의 특성과 $CO_2$분해 특성을 고찰하였다. 페라이트의 XRD 결과, 결정구조는 모두 전형적인 스피넬 구조로 동일하게 나타났다. BET 비표면적은 수열합성법으로 제조한 3원계 페라이트의 경우 110$m^2$/g 이상으로 공침법으로 제조한 페라이트보다 비교적 큰 값을 나타냈고 분말 입자크기 또한 약 10nm의 매우 미세한 분말을 얻을 수 있었다. 3원계 산소 결핍 페라이트의 $CO_2$분해 효율은 공침법으로 합성한 것보다 수열합성법으로 합성한 것이 더 우수하게 나타났으며, N $i_{x}$ $Co_{1-x}$F $e_2$ $O_{4-}$$\delta$/보다 N $i_{x}$Z $n_{1-x}$F $e_2$ $O_{4-}$$\delta$/가 우수한 것으로 나타났다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.24 no.5
• /
• pp.481-489
• /
• 2011

In this paper presents new force method by using singular value decomposition. The existing force method has some advantages about analysis of truss structures such as it is easier basic concept than finite element method, which apply to analyze truss structures. However, this method has complex formulation for analysis. Therefore, in this study proposes new force method using singular value decomposition, which is both having easy basic concept and simple computation than existing force method. The proposed method is illustrated through numerical examples.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1998.05a
• /
• pp.167-171
• /
• 1998

수소는 2차 에너지원으로 그 자원이 풍부하며 청정에너지원으로 지구 환경문제를 해결할 수 있는 에너지로 주목을 받고 있다. 현재 무공해 수소를 제조하는 방법으로는 불을 전기 분해하는 방법 이외에 태양에너지 이용법, 바이오기술, 화학순환기술, 화석연료 분해법 등이 보고되고 있으며 모두 기초연구 단계에 있다. 이중에서 전기분해에 의한 수소의 제조기술은 경제성 및 효율향상을 위해 가장 많이 연구되고 있고 이미 우주선, 잠수함 등 특수용도로는 실용화되고 있는 기술이다. (중략)