• 제목/요약/키워드: 분해공정

Search Result 1,377, Processing Time 0.028 seconds

Selective Production of Monomeric Phenols from Lignin via Two-step Catalytic Cracking Process (2단계 촉매 분해공정을 이용한 리그닌 유래 선택적 페놀화합물 생산)

  • Kim, Jae-Young;Heo, Sujung;Park, Shin Young;Choi, In-Gyu;Choi, Joon Weon
    • Journal of the Korean Wood Science and Technology
    • /
    • v.45 no.3
    • /
    • pp.278-287
    • /
    • 2017
  • In this study, lignin was efficiently degraded via two-step catalytic cracking process and lignin-oil, char, and gas was produced as lignin degraded products. Three kinds of catalysts (MgO, CaO, and Pt/C) were used in first catalytic cracking step and the highest lignin-oil yield (76.2 wt%) was obtained in Pt/C catalyst with the smallest char formation (4.1 wt%). GC-MS/FID analysis revealed that 18 kinds of monomeric phenols existed in lignin-oil and sum of them was the highest in Pt/C condition (97.8 mg/g lignin). Meanwhile, relatively lower yield of monomeric phenols was produced in MgO and CaO condition because of their absorption on catalysts. Lignin-oil produced over Pt/C was introduced to second catalytic cracking process with porous Pd/activated carbon aerogel catalyst. From this process, four kinds of monomeric phenols such as 4-ethylguaiacol, 4-propylguaiacol, 4-ethylsyringol, 4-propylsyringol were selectively produced at 0.89 - 1.82 wt% level.

Process Optimization of Meat Protein Hydrolysate of Ogae Wings by Response Surface Methodology and Its Characteristics Analysis (표면반응분석을 이용한 오계 날개육 단백질 가수분해 최적 생산 공정 개발과 생산물의 특성 분석)

  • Kim, A Yeon;Yoo, Sun Kyun
    • Journal of the Korean Applied Science and Technology
    • /
    • v.33 no.2
    • /
    • pp.293-303
    • /
    • 2016
  • Protein hydrolysate that shows physiological function such as antioxidant, suppression of hypertension, immunodulatory, alleviation of pain, and antimicrobial activity has been known as playing important role like hormone. This study was performed to optimize the hydrolysis of the wing's meat of Yosan-Ogae by a commercial protease. The ranges of processes were the reaction temperature of 40 to $60^{\circ}C$, pH 6 to 8, and enzyme concentration 1 to 3%(w/v). As a result, the optimization of process was determined at temperature of $48-50^{\circ}C$, pH of 7.0-7.2, and enzyme concentration of 3%(w/v), and degree of hydrolysis was 68 to 69% at above conditions. The molecular weight of hydrolysate was distributed to 500-1,200 Da and showed typical peptides. The amino acids of peptides showing presumably antioxidant activity such as histidine, proline, methionine, cystein, tyrosine, tryptophan, phenylalanine comprised about 43.07%. The glutamic acid was 13.6%. Therefore, we expect that those products are useful as functional food ingredients.

Evaluation of Biodegradation Kinetic in Biological Activated Carbon (BAC) Process for Drinking Waste Treatment : Effects of EBCT and Water Temperature (정수처리용 생물활성탄 공정에서 Halonitromethanes (HNMs)의 생물분해 동력학 평가 : EBCT 및 수온의 영향)

  • Son, Hee-Jong;Kang, So-Won;Yoom, Hoon-Sik;Ryu, Dong-Choon;Cho, Man-Gi
    • Journal of Korean Society of Environmental Engineers
    • /
    • v.37 no.7
    • /
    • pp.404-411
    • /
    • 2015
  • In this study, the effects of empty bed contact time (EBCT) and water temperature on the biodegradation of 9 halonitromethanes (HNMs) in biological activated carbon (BAC) process were investigated. Experiments were conducted at three water temperatures ($10^{\circ}C$, $15^{\circ}C$ and $25^{\circ}C$) and three EBCTs (5, 10 and 15 min). Increasing EBCT and water temperature increased the biodegradation efficiency of HNMs in BAC column. Dibromochloronitromethane (DBCNM) and tribromonitromethane (TBNM) showed the highest biodegradation efficiency, but chloronitromethane (CNM) and dichloronitromethane (DCNM) were the lowest. The kinetic analysis suggested a pseudo-first-order reaction model for biodegradation of 7 HNMs at various water temperatures and EBCTs. The pseudo-first-order biodegradation rate constants ($k_{bio}$) of 7 HNMs ranged from $0.0797{\sim}0.7657min^{-1}$ at $10^{\circ}C$ to $0.1245{\sim}1.8421min^{-1}$ at $25^{\circ}C$. By increasing the water temperature from $10^{\circ}C$ to $25^{\circ}C$, the biodegradation rate constants ($k_{bio}$) were increased 1.6~2.4 times.

Combined Removal of n-heptane and CO using Plasma-catalytic Process (플라즈마/촉매 공정을 이용한 n-헵테인과 일산화탄소 동시제거)

  • Lee, Sang Baek;Jo, Jin Oh;Mok, Young Sun
    • Journal of the Korean Institute of Gas
    • /
    • v.20 no.2
    • /
    • pp.1-9
    • /
    • 2016
  • Combined removal of n-heptane and carbon monoxide (CO) using a plasma-catalytic process was investigated. The performance of the plasma-catalytic process was compared with that of the catalyst-alone process to characterize the decomposition of n-heptane and CO with the operation parameters such as the type of catalyst, reaction temperature, and discharge power. From several sets of experiments, it was found that the decomposition efficiency of n-heptane mainly depended on the specific input energy rather than the reactor temperature, whereas the oxidation of CO on both the energy density and the reaction temperature. The results conducted over several metal oxide catalysts exhibited that the decomposition efficiency of n-heptane was in the order: $Pd/{\gamma}-Al_2O_3$ > $Ru/{\gamma}-Al_2O_3{\approx}Ag/{\gamma}-Al_2O_3$. Especially, $Pd/{\gamma}-Al_2O_3$ catalyst did hardly generate CO as a byproduct during the decomposition of n-heptane under an appropriate condition, revealing $CO_2$ selectivity of nearly 100%. The CO oxidation efficiency was largely affected by the type of catalyst ($Pd/{\gamma}-Al_2O_3$ > $Ru/{\gamma}-Al_2O_3$ > $Ag/{\gamma}-Al_2O_3$). At temperatures below $180^{\circ}C$, the plasma-catalytic process was more effective in the oxidation of CO, while above $180^{\circ}C$, the catalytic process resulted in slightly higher CO oxidation efficiency.

The Anaerobic Biodegradability and Methanogenic Toxicity of Pulping Wastewaters (펄프페수의 혐기성 생분해능 및 메탄 생성균의 독성에 관한 연구)

  • 박종안;허준무;장봉기
    • Journal of Environmental Health Sciences
    • /
    • v.24 no.1
    • /
    • pp.70-79
    • /
    • 1998
  • 본 실험의 목적은 다양한 펄프제조 조건과 여러 형태의 리그노 셀루로우스 성분이 펄프폐수의 혐기성 생분해에 미치는 영향을 규명하는 것이다. 실험에 사용된 폐수는 일반적으로 펄프 제조시에 발생되는 폐수를 대상으로 하였으며, 펄프제조 조건은 TMP공정과 소다 펄프공정을 적용하였다. 혐기성 생분해 가능성 시험 및 독성실험은 $35\pm 2\circ$C의 중온상태에서 입상슬러지를 식종물질로 사용한 회분식 반응조를 이용하였다. TMP공정의 배출되는 폐수는 산으로의 전환율이 총 COD기준으로 68-87%로 매우 높은 혐기성 생분해 가능성을 보였다. 그리고 TMP공정폐수는 일반적으로 제지폐수 처리시 독성농도라고 알려진 농도에서도 메탄생성균에 독성을 주지 않았고, 또한 COD 10g/l의 농도에서도 처리에 저해가 일어나지 않았다. 반면에, 알카리성 상태에서 준비된 펄프폐수의 경우는 생분해성이 매우 낮아서 대략 50%정도의 산전환율을 보였으며, 메탄생성균에 상당한 저해를 주었다. 메턴생성균의 활성도에 50%저해를 주는 농도는 2.1~5.4 gCOD/l였다. 알카리성 펄프폐수의 독성에 대한 추가 실험결과 펄프내 wood resin이 산이나 중성 pH부근에서는 잘 용해가 되지 않고 알카리성 상태에서 쉽게 용해되어 메탄생성균에 저해를 나타내는 것으로 밝혀졌다. 따라서 펄프제조시 나무성분이 알카리성분과 접촉할 경우 후속하는 혐기성 처리공정의 메탄생성균에 심각한 저해를 줄 수 있다.

  • PDF

로하스를 적용한 그린 섬유소재에 대한 고찰

  • Kim, In-Ok;Park, Myeong-Su;Heo, Man-U
    • Proceedings of the Korean Society of Dyers and Finishers Conference
    • /
    • 2008.10a
    • /
    • pp.53-54
    • /
    • 2008
  • 섬유 제조에서부터 제품의 소비에 걸친 각 공정에 이르기까지 환경 부하 절감 대책과 섬유 제조 기술에 따른 문제 해결을 위하여 환경 친화적 섬유인 대나무 섬유, 콩 섬유, 재생 섬유, 생분해 되는 섬유 등 다양한 환경 친화적 신소재에 대한 특성을 고찰하고자한다. 환경 친화적 신소재와 섬유 폐기 공정에서의 환경친화적 신소재인 생분해 플라스틱 및 생분해 섬유의 개념을 정의하였다. 환경친화 제품 개발이 여러 가지 면에서 생산자의 부담요인으로 작용할 수 도 있으나, 중장기적으로 볼 때 환경 개선에 기여할 뿐만 아니라 기술 확보 및 시장 개척에 용이할 것이며 소비자들은 환경적, 건강적 이유로 환경친화적 제품에 많은 관심을 가지고 있다. 따라서 제품의 제품개발자들은 공정단계에서 폐기단계에 이르기까지 비용을 감수하더라도 환경 친화적 제품개발에 노력해야 할 것이다.

  • PDF

쌀막걸리에 관한 연구 (제 2 보) 제국중 핵산관련물질 및 분해효소에 관하여

  • 정덕화;성낙계
    • Proceedings of the Korean Society for Applied Microbiology Conference
    • /
    • 1978.10a
    • /
    • pp.205.1-205
    • /
    • 1978
  • 일반적으로 쌀막걸리 중에는 풍미에 관여한다고 생각되는 핵산관련물질이 핵산분해효소인 PDase (phosphodiesterase) 및 PMase (phospomonoesterase) 등의 작용을 받아 대부분이 분해되는 것으로 알려져 있다. 따라서 저자등은 쌀막걸리 제조공정을 통하여 핵산관련물질의 분포와 그와 관련된 핵산 분해효소에 대한 실험을 하였다. 본보에서는 제국중 핵산관련물질과 핵산관련물질을 분해하는 효소의 경시적 변화를 조사하였으며 이들 분해효소의 효소학적 성질을 검토하여 몇가지 결과를 얻었으므로 보고하는 바이다.

  • PDF

Biodegradation of Synthetic Fragrances in Biological Activated Carbon (BAC) Process : Biodegradation Kinetic (BAC 공정에서의 합성 향물질류 생물분해 특성 : 생물분해 동력학)

  • Seo, Chang-Dong;Son, Hee-Jong;Ryu, Dong-Choon;Kang, So-Won;Jang, Seong-Ho
    • Journal of Korean Society of Environmental Engineers
    • /
    • v.36 no.12
    • /
    • pp.858-864
    • /
    • 2014
  • In this study, The effects of empty bed contact time (EBCT) and water temperature on the biodegradation of 8 synthetic fragrances (SFs) in biological activated carbon (BAC) process were investigated. Experiments were conducted at two water temperatures (7 and $18^{\circ}C$) and three EBCTs (5, 10 and 15 min). Increasing EBCT and water temperature increased the biodegradation efficiency of SFs in BAC column. Pentalide and ambrettolide were the highest biodegradation efficiency, but DPMI and ADBI were the lowest. The kinetic analysis suggested a pseudo-first-order reaction model for biodegradation of 8 SFs at various water temperatures and EBCTs. The pseudo-first-order biodegradation rate constants ($k_{bio}$) of 8 SFs ranging from $0.1184{\sim}0.6545min^{-1}$ at $7^{\circ}C$ to $0.3087{\sim}0.9173min^{-1}$ at $18^{\circ}C$. By increasing the water temperature from $7^{\circ}C$ to $18^{\circ}C$, the biodegradation rate constants ($k_{bio}$) were increased 1.4~2.6 times.

Biodegradation of UV Filters in Biological Activated Carbon (BAC) Process : Biodegradation Kinetic (BAC 공정에서의 자외선 차단제 생물분해 특성 : 생물분해 동력학)

  • Seo, Chang-Dong;Son, Hee-Jong;Jung, Jong-Moon;Choi, Jin-Taek;Ryu, Dong-Choon;Jang, Seong-Ho
    • Journal of Korean Society of Environmental Engineers
    • /
    • v.36 no.11
    • /
    • pp.739-746
    • /
    • 2014
  • In this study, The effects of empty bed contact time (EBCT) and water temperature on the biodegradation of 8 UV filters in biological activated carbon (BAC) process were investigated. Experiments were conducted at two water temperatures (7 and $18^{\circ}C$) and three EBCTs (5, 10 and 15 min). Increasing EBCT and water temperature increased the biodegradation efficiency of UV filters in BAC column. EHMC and BZC were the highest biodegradation efficiency, but BP and 4-MBC were the lowest. The kinetic analysis suggested a first-order reaction model for biodegradation of 8 UV filters at various water temperatures and EBCTs. The first-order biodegradation rate constants ($k_{bio}$) of 8 UV filters ranging from $0.2730{\sim}0.6365min^{-1}$ at $7^{\circ}C$ to $0.4824{\sim}0.8743min^{-1}$ at $18^{\circ}C$. By increasing the water temperature from $7^{\circ}C$ to $18^{\circ}C$, the biodegradation rate constants ($k_{bio}$) were increased 1.5~2.1 times.

The Development of Whitening Cosmetic Ingredient Having Activity of Melanin Degradation (멜라닌 분해능을 지닌 미백용 기능성 화장품원료의 개발)

  • Kang, Whan-Koo;Hwang, Sun-Duk;Kim, Hyoung-Sik;Jeung, Jong-Sik;Lee, Bheong-Uk
    • KSBB Journal
    • /
    • v.22 no.1
    • /
    • pp.7-15
    • /
    • 2007
  • Extensive research was carried out for inhibition of melanin formation as development of whitening cosmetic ingredients. But degradation of melanin itself was not intensively pursued as development of cosmetics. In this study, novel melanin degradation enzyme was developed and characterized. Also this enzyme production process was optimized and formulation was tried using micro encapsulation technique.