• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.10 no.2
• /
• pp.49-58
• /
• 1990

A numerical procedure is developed to analyze the time-dependent deflections of prestressed concrete bridges constructed by the segmental cantilever method. The developed computer program accounts for the time-dependent properties of prestressed concrete materials due to the varying modulus of elasticity, creep and shrinkage of concrete and the stress relaxation of prestressing steel. It also accounts for the stiffness increase due to the presence of the steel reinforcements and the effects of the shear deformation of the prestressed concrete bridge girders. The program is applied to a multi-span continuous segmental prestressed concrete bridge to demonstrate its capabilities and to explore the behavior characteristics of the segmental bridges.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.4 no.3
• /
• pp.1-9
• /
• 1984

A mult-stage rotating biological contactor process was evaluated by using the mixtures of nightsoil and sewage as influent substrate. An emphasis was concentrated on the BOD removal efficiency at each stage of the process with respect to hydraulic detention times, rotating speeds of the disc and influent organic substrate concentrations. The results indicated that the process was found to be economically feasible when operated at hyduraulic detention time of 2 hours and disc rotating speed of 3 RPH. As to treatment efficiency, BOD removal efficiency of 40 to 50 percent could be obtained at the first stage regardless of influent organic substrate concentrations. The overall BOD removal efficiency of the process was found to be 88 to 90 percent at even high organic loading of $2.0kgBOD/m^3{\cdot}day$.

• Korean Journal of Materials Research
• /
• v.8 no.10
• /
• pp.945-949
• /
• 1998

Ta(OC2H5)5와 NH3를 이용하여 Cycle-CVD법으로 산화탄탈륨 막을 증착하였다. Cycle-CVD법에서는 Ta(OC2H5)5와 NH3사이에 불활성 기체를 주입한다. 하나의 cycle은 Ta(OC2H5)5주입, Ar주입, NH3 주입, Ar 주입의 네 단계로 이루어진다. Cycle-CVD법으로 산화탄탈륨 막을 증착할 때, 온도 $250-280^{\circ}C$에서 박막의 증착 기구는 원자층 증착(Atomic Layer Deposition:ALD)이었다. $265^{\circ}C$에서 Ta(OC2H5)5:Ar:NH3:Ar:NH3:Ar의 한 cycle에서 각 단계의 주입 시간을 1-60초:5초:5초:5초로 Ta(OC2H5)5 주입 시간을 변화시키면서 산화탄탈륨 막을 Cycle-CVD법으로 증착하였다. Ta(OC2H5)5주입시간이 증가하여도 cycle 당 두께가 $1.5\AA$/cycle로 일정하였다. $265^{\circ}C$에서 증착된 박막의 누설 전류는 2MV/cm에서 2x10-2A/$\textrm{cm}^2$이었고 열처리후의 산화탄탈륨 막의 누설 전류값은 $10-4A\textrm{cm}^2$ 이하고 감소하였다. 증착한 산화탄탈륨 막의 성분을 Auger 전자 분광법으로 분석하였다. 2$65^{\circ}C$에서 증착한 막의 성분은 탄탈륨 33at%, 산소 50at%, 탄소 5at%, 질소 12at% 이었으며 90$0^{\circ}C$, O2300torr에서 10분 동안 열처리한 박막은 탄탈륨 33at%, 산소 60wt%, 탄소 4at%, 질소 3at%이었다. 박막의 열처리 온도가 높을수록 불순물인 탄소와 질소의 박막 내 잔류량이 감소하였다. 열처리 후의 박막은 O/Ta 화학정량비가 증가하였으며 Ta의 4f7/5와 4f 5/2의 결합 강도가 열처리 전 박막보다 증가하였다. 열처리 후 누설 전류가 감소하는 것은 불순물 감소와 화학정량비 개선 및 Ta-O 결합 강도의증가에 의한 것으로 생각된다.

• Journal of radiological science and technology
• /
• v.27 no.3
• /
• pp.19-24
• /
• 2004

MRI imaging is one of the imaging techniques showing anatomical structures of human body for medical diagnosis, and has been researched in order to provide better quality of anatomical information. In this study, we propose a very useful method to extract an interest areas and how to diagnose necrolysis of femoral neck disease automatically. Regions of femoral neck is set using anatomical features and Hough transform and advantages of both region extension and histogram-based region segmentation method are combined for better region segmentation. As a result of the proposed method, good imaging quality was obtained for femoral neck with both normal and severe necrosis as well as for femoral neck in early stage of necrolysis.

• Journal of KIISE:Software and Applications
• /
• v.33 no.4
• /
• pp.418-426
• /
• 2006

This paper proposes a robust and efficient segmentation method for a cardiac ultrasound image taken from a probe inserted into the heart in surgery. The method consists of three steps: initial boundary extraction, whole boundary modification using confidence competition, and local boundary modification using the rolling spoke method. Firstly, the initial boundary is extracted with threshold regions along the global spokes emitted from the center of an ultrasound probe. Secondly, high confidence boundary edges are detected along the global spokes by competing among initial boundary candidate and new candidates achieved by edge and appearance information. finally, the boundary is modified by rolling local spokes along concave regions that are difficult to extract using the global spokes. The proposed method produces promising segmentation results for the ultrasound cardiac images acquired during surgery.

• Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
• /
• 2003.10a
• /
• pp.189.1-189
• /
• 2003

‘부유’단감은 국내에서는 일반화되어 있는 PE필름 밀봉 저장방식으로 과실의 호흡에 의해 산소농도의 감소와 이산화탄소의 증가로 호흡이 억제되고 이에 따라 노화가 지연됨으로 과실의 저장수명을 증가시키는 방식이며, 최적저장온도는 -0.5~$0^{\circ}C$라고 보고되고 있다. 이에 본 실험에서는 상온유통을 고려하여 2$0^{\circ}C$에서 0.03mm, 0.05mm LDPE필름으로 포장한 경우와 무포장한 경우를 비교하여, 중량, 수소이온농도, 가용성고형분, 경도를 측정하고 이를 외관품질검사 결과와 종합적으로 검토하였으며, 또한 환경기체조성의 범위를 설정하기 위하여 산소농도(1~5%), 이산화탄소농도(5~15%)를 독립변수로 중심합성계획법(central composite design)에 의해 3단계로 부호화하였고 산소소비농도, 이산화탄소 발생속도, pH 당도, 경도를 종속(반응)변수로 결과를 이용하여 독립변수와 종속변수간의 함수관계를 규명하며, 독립변수들의 값의 변화에 따라서 반응량(종속변수)이 어떻게 달라지는 가를 예측하며, 독립변수가 종속변수인 반응량을 최적화(Optimize) 하는가와 어떤 실험계획법을 쓰면 가장 좋은 정도를 얻을 수 있는지를 규명하고자 한다.

• Journal of the Society of Naval Architects of Korea
• /
• v.32 no.3
• /
• pp.62-71
• /
• 1995

In the numerical analysis of incompressible unsteady Navier-stokes equation, large time is required for solving the pressure Poisson equation of the elliptic type at each time step. In this paper, a numerical analysis by the direct method is carried out to solve the pressure Poisson equation and the computing time is analyzed as mesh size increases. The pressure Poisson equation can be transformed to the boundary value problem by the Green theorem. The computing time for the convolution type of the domain integral can be reduced by using F.F.T. and the computing time in the direct method depends entirely on obtaining the solution of the boundary value problem. The numerical analysis on the known solutions is carried out and compared for the verification of the direct method. And the numerical analysis on the body boundary and domain decomposition problem are carried out with the computing time less than O($n^{3}$) in the (n.n) mesh.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.2
• /
• pp.308-314
• /
• 2006

A line scan camera is applied to enhance COG(Chip On Glass) inspection accuracy to be measured a few micro unit. The foreign substance detection among various faulty factors has been the most difficult technology in the faulty automatic inspection step since COG pattern is very miniature and complexity. In this paper, we proposed two step area segmentation template matching method to increase matching speed. Futhermore to detect foreign substance(such as dust, scratch) with a few micro unit, the new method using gradient mask and AND operation was proposed. The proposed 2 step template matching method increased 0.3 - 0.4 second matching speed compared with conventional correlation coefficient. Also, the proposed foreign substance applied masks enhanced $5-8\%$ faulty detection rate compared with conventional no mask application method.

• Microbiology and Biotechnology Letters
• /
• v.32 no.4
• /
• pp.317-321
• /
• 2004

We selected a solvent for producing antioxidants from sporophyll of Undaria pinnatOptimum extraction condition for antioxidant ability(Y) of sporophyll of U. pinnatifida was investigated using response surface methodology(RSM). A compound central design was used with variables ($X_1$)temperature($^{\circ}C$) (3.4; 20; 60; 100; 116.6); ($X_2$) pH(1.8; 3; 6; 9; 10.2) and ($X_3$) treatment time(min) (1.7; 10; 30; 50; 58.3). Antioxidant activities were increased with decreasing pH and increasing temperature. The optimal extraction conditions for antioxidant ability(Y) of sporophyll of U. pinnatifida were found to be temperature $51.55^{\circ}C$, pH 4.2 and treatment time 28.2 min. Among the variables tested, pH showed greater significant facin extraction of antioxidants from sporophyll of U. pinnatifida.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.9 no.1
• /
• pp.33-40
• /
• 1989

In the design of reinforced concrete framed structures, which consist of various design variables, the objective and the constraint functions are formulated in complicated forms. Usually iterative methods have been used to optimize the design variables. In this paper, multilevel formulation is adopted, and design variables are selected in reduced numbers at each level, to reduce the iterative cycle and to accelerate the convergence rate. At level 1, elastic analysis is performed to get the upper and lower bounds of the redistributed design moments due to inelastic behavior of the frame. Then the design moments are taken as design variables and optimized at level 2, and the sizing variables are optimized at level 3. The optimization of redistributed moments is performed using the design sensitivity obtained at the level 2, and force approximation technique is used to reflect the variation of design variables in the lower level to the upper level. The design variables are selected in reduced numbers at each level, and the optimization formulation is simplified effectively. A cost function is taken as the objective function, and the constraints of the stress of the structures are derived from BSI CP 110 following limit state theory. Numerical examples are included to prove the effectiveness of the developed algorithm.