• Korean Chemical Engineering Research
• /
• v.60 no.4
• /
• pp.588-593
• /
• 2022

Terephthalaldehyde (TPA) is introduced as a cross liker to enhance electron transfer of hemin-based cathodic catalyst consisting of polyethyleneimine (PEI), carbon nanotube (CNT) for hydrogen peroxide reduction reaction (HPRR). In the cyclic voltammetry (CV) test with 10 mM H₂O₂ in phosphate buffer solution (pH 7.4), the current density for HPRR of the suggested catalyst (CNT/PEI/hemin/PEI/TPA) shows 0.2813 mA cm^-2 (at 0.2 V vs. Ag/AgCl), which is 2.43 and 1.87 times of non-cross-linked (CNT/PEI/hemin/PEI) and conventional cross liker (glutaraldehyde, GA) used catalyst (CNT/PEI/hemin/PEI/GA), respectively. In the case of onset potential for HPRR, that of CNT/PEI/hemin/PEI/TPA is observed at 0.544 V, while those of CNT/PEI/hemin/PEI and CNT/PEI/hemin/PEI/GA are 0.511 and 0.471 V, respectively. These results indicate that TPA plays a role in facilitating electron transfer between the electrodes and substrates due to the π-conjugated cross-linking bonds, whereas conventional GA cross-linker increases the overpotential by interrupting electron and mass transfer. Electrochemical impedance spectroscopy (EIS) results also display the same tendency. The charge transfer resistance (R_ct) of CNT/PEI/hemin/PEI/TPA decreases about 6.2% from that of CNT/PEI/hemin/PEI, while CNT/PEI/hemin/PEI/GA shows the highest R_ct. The polarization curve using each catalyst also supports the superiority of TPA cross liker. The maximum power density of CNT/PEI/hemin/PEI/TPA (36.34±1.41 μWcm^-2) is significantly higher than those of CNT/PEI/hemin/PEI (27.87±0.95 μWcm^-2) and CNT/PEI/hemin/PEI/GA (25.57±1.32 μWcm^-2), demonstrating again that the cathode using TPA has the best performance in HPRR.

• Korean Journal of Psychosomatic Medicine
• /
• v.30 no.2
• /
• pp.196-202
• /
• 2022

Objectives : The purpose of this study was to quantitatively assess the degree of Graves' Disease affecting mental health through the results of multiphasic military personality inventory (MPI) in 19-year-old men. Methods : We collected and analyzed the results of the MPI for 592 healthy subjects and 148 Graves' disease patients among the 19-year-old men who visited the Military Manpower Administration from February 2008 to January 2010. Results : Among demographic characteristics, both Graves' disease and control group are 19-year-old men. Educational level, socioeconomic status, parental relationship, and BMI were not statistically different between the two groups (χ²=0.089, p=0.766; χ²=5.090, p=0.278; χ²=5.988, p=0.112 ; t=-0.635, p=0.526). In the MPI, among validity scales, the score of the faking-good subscale was significantly lower in the Graves' group (t=3.507, p<0.001), but in the faking-bad and infrequency subscales scores were not significantly different between two groups (t=-1.700, p=0.090; t=-0.519, p=0.604). Among the neurosis scale, anxiety, depression, somatization, and personality disorder subscale scores were all significantly higher in Graves' disease group (t=-3.323, p<0.001; t=-4.210, p<0.001; t=-6.202, p<0.001; t=-2.872, p<0.01). Among the psychopath scale, each score of schizophrenia and paranoia subscales were not statistically different between the two groups (t=-0.158, p=0.874; t=-0.846, p=0.398). Conclusions : According to MPI result, we can confirm that Graves' disease patients in 19-year-old-men may appear features such as anxiety, depression, somatization and personality tendency (introversion or impulsivity) than the control group.

• Korean Journal of Psychosomatic Medicine
• /
• v.30 no.2
• /
• pp.155-164
• /
• 2022

Objectives : A growing body of evidence links type 2 diabetes (T2D) with a neurodegenerative disease (ND) such as Alzheimer's disease and Parkinson's disease. The purpose of this study is to investigate the relationship between NDs and the development of T2D by comparing the incidence of T2D in a group of various NDs (ND group) and control group. Methods : A population-based 10-year follow-up study was conducted using the Korean National Health Information Database for 2002-2015. We used a retrospective cohort study design to investigate the association of ND with T2D occurrence. The study population included ND (n=8,814) and control (n=37,970) groups, all aged 60 years or over. The Kaplan-Meier method was used to estimate the risk of developing T2D as a function of time. Cox proportional hazards regression models were used to evaluate the relationship between ND and T2D. Results : T2D was developed in a significantly higher percentage of patients in the ND group (53.6%) than in the control group (44.7%). The ND group increased the risk of T2D (HR, 1.43; 95% CI, 1.38-1.47). About one-third of patients in both groups were additionally diagnosed with another ND before the occurrence of T2D during a 10-year follow-up period. When compared to those who did not have another ND during the follow-up period, the incidence of T2D in those who were additionally diagnosed with another ND was higher in both the ND and control groups. Conclusions : The ND group had about 1.4 times higher risk of developing T2D than the control group. Our results showed a positive association between ND and T2D.

• Ecology and Resilient Infrastructure
• /
• v.9 no.4
• /
• pp.259-268
• /
• 2022

In this study, seeds of Festuca ovina var. coreana growing in waste coal landfills exposed to heavy metal contamination for a long time were collected, and growth characteristics and heavy metal accumulation capacity were evaluated through greenhouse cultivation experiments with germinated seedlings, and was conducted for the applicability of phytoremediation technology. Concentration gradients of arsenic-treated artificial soil were 25, 62.5, 125, and 250 mg/kg, respectively, lead concentrations were 200, 500, 1000, and 2000 mg/kg, and cadmium concentrations were 15, 30, 60, and 100 mg/kg, respectively In the arsenic, lead, and cadmium-treated experimental groups, the number of leaves of F. ovina var. coreana decreased in all compared to the control group except for the lead-treated groups (200, 500, and 1000 mg/kg). Length growth of the shoot part was increased in all of the arsenic treatment groups compared to the control group, but decreased in all of the root parts. In the 1000 and 2000 mg/kg lead treatment groups, lengths increased compared to the control group, but in the other treatments, they were shorter than the control group. In the case of the cadmium treatment group, all of the shoot parts were increased compared to the control group, and all of the root parts were decreased. In the case of arsenic treatment, the biomass was decreased at all parts and all concentrations compared to the control group. The 200, 500, and 1000 mg/kg lead treatments showed larger biomass than the control group in both shoot and root parts. In the cadmium treatment group, the biomass of both shoot and root parts decreased compared to the control group. As the concentration of heavy metal treatment increased, both the number of leaves and the biomass by plant parts tended to decrease, and the length growth of the shoot part tended to increase slightly, but the root part tended to decrease slightly. The arsenic accumulation concentrations of the shoot and root parts of the 62.5 mg/kg arsenic treatment area were 9.4 mg/kg and 253.3 mg/kg, respectively. While the shoot part of the 250 mg/kg arsenic treatment area withered away, the arsenic accumulation concentration in the root part was analyzed to be 859.1 mg/kg, In the 2,000 mg/kg lead treatment area, the shoot and root parts accumulated 10,308.1 and 11,012.0 mg/kg, which were 1.1 times higher than the root parts. At 100 mg/kg cadmium treatment, the shoot and root parts were 176.0 and 287.2 mg/kg, and the root part accumulated 1.6 times higher than the shoot part. As a result of tolerance evaluation of F. ovina var. coreana, multi-tolerance to three heavy metals was confirmed by maintaining growth without dying in all treatment groups of arsenic, lead, and cadmium. Plant extraction (phytoextraction) of F. ovina var. coreana was verified as a species that can be applied up to 2,000 mg/kg of soil lead contamination.

• Informatization Policy
• /
• v.29 no.1
• /
• pp.24-37
• /
• 2022

Amid rapid changes in the ICT environment attributed to the 4th Industrial Revolution, the development of information & communication technology, and COVID-19, the existing internet developed without considering security, mobility, manageability, QoS, etc. As a result, the structure of the internet has become complicated, and problems such as security, stability, and reliability vulnerabilities continue to occur. In addition, there is a demand for a new concept of the internet that can provide stability and reliability resulting from digital transformation-geared advanced technologies such as artificial intelligence and IoT. Therefore, in order to suggest a way of implementing the Korean future internet that can strengthen cybersecurity, this study suggests the direction and strategy for promoting the future internet that is suitable for the Korean cyber environment through analyzing important key factors in the implementation of the future internet and evaluating the trend and suitability of domestic & foreign research related to future internet. The importance of key factors in the implementation of the future internet proceeds in the order of security, integrity, availability, stability, and confidentiality. Currently, future internet projects are being studied in various ways around the world. Among numerous projects, Bright Internet most adequately satisfies the key elements of future internet implementation and was evaluated as the most suitable technology for Korea's cyber environment. Technical issues as well as strategic and legal issues must be considered in order to promote the Bright Internet as the frontrunner Korean future internet. As for technical issues, it is necessary to adopt SAVA IPv6-NID in selecting the Bright Internet as the standard of Korean future internet and integrated data management at the data center level, and then establish a cooperative system between different countries. As for strategic issues, a secure management system and establishment of institution are needed. Lastly, in the case of legal issues, the requirement of GDPR, which includes compliance with domestic laws such as Korea's revised Data 3 Act, must be fulfilled.

• Korean journal of applied entomology
• /
• v.61 no.2
• /
• pp.319-330
• /
• 2022

Andong is a place to culture the great amount of hot pepper (Capsicum annuum L.) in Korea. This study reports a yearly occurrence (March 31~October 25, 2021) of thrips infesting the hot pepper in Andong. Thrips caught to yellow sticky traps were diagnosed by morphological characters and showed two dominant species: Frankliniella occidentalis and F. intonsa. During this period, a total of 107,874 thrips were caught and included F. occidentalis at about 82%, F. intonsa at about 17%, and the other thrips at about 0.3%. There were two main peaks at May~June and at September~October, respectively, in which the total number of thrips was higher in the second peak and most were F. occidentalis. Interestinly, a low level of thrips occurred during July~August was observed and explained by their susceptibility to high temperatures. A laboratory experiment by exposing thrips to high temperatures showed that thrips were susceptible to temperatures higher than 35℃ and not tolerant to 45℃ for 1 h. Indeed, high temperatures higher than 45℃ were recorded in the greenhouses in Andong during July~August. F. occidentalis was more tolerant to the high temperatures than F. intonsa. On the other hand, the thrips showed the highest occurrence peak at July~August in hot pepper-culturing greenhouse in Kangwon, where the average temperatures were mostly lower than those of Andong and no high temperatures higher than 45℃ were recorded during July~August. A viral disease caused by tomato spotted wilt virus (TSWV) was observed in the hot peppers cultured in Andong greenhouses. Multiplex PCR was used to detect the virus along with identification of thrips. With a high record of about 30%, the virus-infected thrips were detected during all the monitoring period. The virulent thrips were identified to be only F. intonsa. These results suggest that F. occidentalis gives a direct damage especially during harvesting period with their high populations while F. intonsa gives indirect damage by transmitting TSWV.

• Industry Promotion Research
• /
• v.7 no.3
• /
• pp.115-124
• /
• 2022

The most difficult things, when we study the future-telling science of human destiny, are in case of what one's individual's fate is bad which is shown by Saju-Palza(四柱八字), In that case, we have faced the problems on how we live ; to follow or to deny our fate under the brief of improving our lives by trying to make hard efforts, regardless of the bad Saju-Palza(四柱八字). However, we can hardly find the clear answer to those questions. 『Liao Fan 4 lessons(了凡四訓)』 shows that one's destiny can be improved by accumulating good deeds despite of the bad Saju-Palza(四柱八字). Someone says that future can be created, not be foreseen. As well, Dr. Steven Coby says that the best definite way to forecast future is in creating the future. Anyhow, the strong desire and curiosity to know one's individual's future is having been lasted until now since the Genesis. we guess these desires may be one of our basic instinct. If then, the function and role of the future-telling science will be to increase the accuracy of future prediction, whether our fate has been fixed or been able to be changeable. Therefore, this study summarizes the definition of confusing terms, focusing on Gyeokguk(格局) and Sangshin(相神), the core of Myeongrihak(命理學), which is considered to be one of the most popular future-telling science. Concering Gyeok(格), in this paper, Nae-Gyeok(內格) has been mainly considered and Oi-Gyeok(外格) or Special-Gyeok(別格) have not been addressed. Specifically, it summarized the views of the classical Myeongri(命理) books and modern scholars on Gyeokguk(格局) and Yongshin(用神). In particular, it also summarized the comparison of various concepts of Gyeokguk(格局), the advantages and disadvantages of each Nae-Gyeok(內格)'s characteristic, the determination order of Nae-Gyeok(內格) and the good case and bad case of it's Gyeok(格). In addition, it was necessary to summarize the concept of Sangshin(相神), which was talked about in 『Japyeongjinjeon』 and to briefly summarize Heeshin(喜神) with a broader concept than Sangshin(相神). The different usage of Sangshin(相神) was also analyzed, between the priority interpretation of Cheongan(天干) in Day-Column(日柱) and the interpretation based on Jijee(地支) in Month-Column(月柱). Finally, this paper was completed, leaving it later as a research task, the confusion that comes from the scholars' acceptance of the comprehensive diversity on the same term.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.68 no.1
• /
• pp.20-26
• /
• 2023

Fiber content in the storage roots of sweetpotato varies between different varieties. For examples, the high fiber content of certain types has a poor texture when steamed or roasted. This study was conducted to evaluate the optimal sieve mesh size for separating fibers, the chemical composition of fibers and differences in fiber content among different varieties. We found that the separated fiber content (dry weight) of mashed and steamed sweetpotato was higher after washing three times (143.3 mg/100 g) compared with that washed five times (128.4 mg/100 g). The Hogammi variety remained 85.9% of total fiber content at 10 mesh (2,000 ㎛) and 9.6% of total fiber content at 30 mesh (600 ㎛), and Jinyulmi remained 74.9 and 16.7% of total fiber content , respectively. Therefore, a 30 mesh sieve was considered the most suitable for fiber separation. Among the 10 studied cultivars, Jinhongmi showed the lowest amount of fiber (24.8 mg/100 g) and Hogammi had the highest amount (111.4 mg/100 g), which was 4.5 times larger than that of Jinhongmi. Cellulose, hemicellulose and lignin content of separated fibers showed no difference between the viscous-type Hogammi and powdery-type Jinyulmi varieties, with averages of 32.5, 22.3 and 29.6%, respectively. Correlation results using the Image J program showed a significant correlation between the distribution of the stained area and the fiber content (R = 0.74, p < 0.05). Staining distribution differed among varieties, suggesting that a simple fiber content test could be performed using the staining method on raw sweetpotato. These results provide useful information to help inform farmers on the fiber content of different sweetpotato varieties.

• Proceedings of the KACD Conference
• /
• 2008.05a
• /
• pp.169-176
• /
• 2008

The purpose of this study was to evaluate the effect of thickness, filling methods and curing methods on the polymerization of dual cured core materials by means of microhardness test. Two dual cured core materials, MultiCore Flow (Ivoclar Vivadent AG, Schaan, Liechtenstein) and Bis-Core (Bisco Inc., Schaumburg, IL, USA) were used in this study. 2 mm (bulky filled), 4 mm (bulky filled), 6 mm (bulky and incrementally filled) and 8 mm (bulky and incrementally filled)-thickness specimens were prepared with light cure or self cure mode. After storage at $37^{\circ}C$ for 24 hours, the Knoop hardness values (KHN) of top and bottom surfaces were measured and the microhardness ratio of top and bottom surfaces was calculated. The data were analyzed using one-way ANOVA and Scheffe multiple comparison test, with ${\alpha}=0.05$. The effect of thickness on the polymerization of dual cured composites showed material specific results. In 2, 4 and 6 mm groups, the KHN of two materials were not affected by thickness. However, in 8 mm group of MultiCore Flow, the KHN of the bottom surface was lower than those of other groups (p < 0.05). The effect of filling methods on the polymerization of dual cured composites was different by their thickness or materials. In 6 mm thickness, there was no significant difference between bulk and incremental filling groups. In 8 mm thickness, Bis-Core showed no significant difference between groups. However, in MultiCore Flow, the microhardness ratio of bulk filling group was lower than that of incremental filling group (p < 0.05). The effect of curing methods on the polymerization of dual cured composites showed material specific results. In Bis-Core, the KHN of dual cured group were higher than those of self cured group at both surfaces (p < 0.05). However, in MultiCore Flow, the results were not similar at both surfaces. At the top surface, dual cured group showed higher KHN than that of self cured group (p < 0.05). However, in the bottom surface, dual cured group showed lower value than that of self cured group (p < 0.05).

• Journal of Wetlands Research
• /
• v.25 no.2
• /
• pp.75-82
• /
• 2023

Data for measuring the flow rate of streams are used as important basic data for the development and maintenance of water resources, and many experts are conducting research to make more accurate measurements. Especially, in Korea, monsoon rains and heavy rains are concentrated in summer due to the nature of the climate, so floods occur frequently. Therefore, it is necessary to measure the flow rate most accurately during a flood to predict and prevent flooding. Thus, the U.S. Geological Survey (USGS) introduces 1, 2, 3 point method using a flow meter as one way to measure the average flow rate. However, it is difficult to calculate the average flow rate with the existing 1, 2, 3 point method alone.This paper proposes a new 1, 2, 3 point method formula, which is more accurate, utilizing one probabilistic entropy concept. This is considered to be a highly empirical study that can supplement the limitations of existing measurement methods. Data and Flume data were used in the number of holesman to demonstrate the utility of the proposed formula. As a result of the analysis, in the case of Flume Data, the existing USGS 1 point method compared to the measured value was 7.6% on average, 8.6% on the 2 point method, and 8.1% on the 3 point method. In the case of Coleman Data, the 1 point method showed an average error rate of 5%, the 2 point method 5.6% and the 3 point method 5.3%. On the other hand, the proposed formula using the concept of entropy reduced the error rate by about 60% compared to the existing method, with the Flume Data averaging 4.7% for the 1 point method, 5.7% for the 2 point method, and 5.2% for the 3 point method. In addition, Coleman Data showed an average error of 2.5% in the 1 point method, 3.1% in the 2 point method, and 2.8% in the 3 point method, reducing the error rate by about 50% compared to the existing method.This study can calculate the average flow rate more accurately than the existing 1, 2, 3 point method, which can be useful in many ways, including future river disaster management, design and administration.