• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.30 no.2
• /
• pp.188-202
• /
• 1997

The seasonal variability of the sea surface winds over the last Sea of Korea (Japan Sea) is investigated by means of empirical orthogonal function (EOF) analysis. The combined representation of fields of three climatic variables by empirical orthogonal functions is discussed. The eigenvectors are derived from daily sea level pressure, wind speed and 10-day mean sea surface temperature (SST) during 15 years $(1978\~1992)$. The spatial patterns of the mean pressure are characterized by the high pressure in the western part and the low pressure in the eastern part. The spatial distribution of the standard deviation (SD) of pressure are characterized by max SD of 6.6 mb near the Vladivostok, and minima along the coast of the Japan. In Vladivostok, the maxima of SD of SST and south-north wind (WV) were also occurred. The representation of fields of individual meteorological variables by EOF shows that the first mode of the west-east wind (WU) explain over $47.3\%$ of the variance and the second mode of WU represents $30\%$. Especially, the first mode of the WV explain $70.9\%$ of the variance and their time series coefficients show 1-cpy, 0.5-cpy frequency spectrum. The spatial distribution of the first mode eigenvectors of SST are characterized by maximum near Vladivostok. The combined representation of fields of several variables (pressure, wind, SST) reveals that the first mode magnitudes of the variance of the combined eigenvectors (WU-PR) are increased. By means of this result, the 1-year peak and the 6-months peak are remarkable. In the three combined patterns (wind, pressure, SST), the second mode of the eigenvector (wind) is affected by the SST. Their time coefficients of the first mode show noticeable 1-year peak. The spectral analysis of the second mode shows broad seasonal signal with the period of 4-months and a significant peak of variability at 3-month period.

• The Journal of Korean Society for Radiation Therapy
• /
• v.23 no.1
• /
• pp.1-6
• /
• 2011

Purpose: Immobilizations used in order to maintain the reproducibility of a patient set-up and the stable posture for a long period are important more than anything else for the accurate treatment when the stereotactic body radiotherapy is underway. So the purpose of this study is to adapt the optimum immobilizations for the stereotactic body radiotherapy by comparing two commercial immobilizations with the self-manufactured immobilizations. Materials and Methods: Five people were selected for the experiment and three different immobilizations (A: Wing-board, B: BodyFix system, C: Arm up holder with vac-lock) were used to each target. After deciding on the target's most stable respiratory cycles, the targets were asked to wear a goggle monitor and maintain their respiration regularly for thirty minutes to obtain the respiratory signals. To analyze the respiratory signal, the standard deviation and the variation value of the peak value and the valley value of the respiratory signal were separated by time zone with the self-developed program at the hospital and each tie-downs were compared for the estimation by calculating a comparative index using the above. Results: The stability of each immobilizations were measured in consideration of deviation changes studied in each respiratory time lapse. Comparative indexes of each immobilizations of each experimenter are shown to be A: 11.20, B: 4.87, C: 1.63 / A: 3.94, B: 0.67, C: 0.13 / A: 2.41, B: 0.29, C: 0.04 / A: 0.16, B: 0.19, C: 0.007 / A: 35.70, B: 2.37, C: 1.86. And when all five experimenters wore the immobilizations C, the test proved the most stable value while four people wearing A and one man wearing D expressed relatively the most unstable respiratory outcomes. Conclusion: The self-developed immobilizations, so called the arm up holder vac-lock for the stereotactic body radiotherapy is expected to improve the effect of the treatment by decreasing the intra-fraction organ motions because it keeps the respiration more stable than other two immobilizations. Particularly in case of the stereotactic body therapy which requires the maintenance of set-up state for a long time, the self-developed immobilizations is thought to more useful for stereotactic body radiotherapy rather than the rest two immobilizations with instable respiratory cycle as time passes.

• Journal of the Korean Applied Science and Technology
• /
• v.36 no.4
• /
• pp.1312-1326
• /
• 2019

The purpose of this study is to examine whether the 12-week Nordic walking can improve the physical function and arthritis pain of elderly women with osteoarthritis This study were divided into randomly assigned Nordic Walking Exercise Group (n=9) and Control Group (n=7) for 16 Elderly women diagnosed with Osteoarthritis (age: 73±3.79 year, height: 154.3±4.09 cm). The exercise group used Nordic sticks to carry out 30 minutes of Nordic walking exercise three times a week for 12 weeks, and the kinetic intensity was set at 40-60% of HRR. The control group maintained daily life for the same period. Body composition (weight, percentage body fat, skeletal muscle mass), muscular strength, Flexibility (muscular strength of upper and lower limbs, flexibility of upper and lower limbs), balance ability (static balance, dynamic balance) and pain level were measured as subordinate variables. These indicators were measured twice before and after the exercise program. The study shows that percentage body fat and skeletal muscle mass in the body composition function over 12 weeks of Nordic walking exercise have significant effects after the exercise than before (p=004)(p=.003), and it also shows significant interaction effects between the groups and timings(p=.018)(p=.005). In muscular strength, Flexibility factors, there were significant effects between the groups and timings in the upper limb muscular strength and the lower limb flexibility (p=.009)(p=.036), and a significant difference between the exercise group and the control group(p=.006) in the lower limb muscular strength. In addition, in the upper limb flexibility, there was a more significant difference after the exercise than before(p=.020). There were improvement effects after the exercise than before in the balance ability and the static balance(p=.016), but no difference in the dynamic balance(p>.05). In pain, there was a significant improvement after the exercise than before(p=.022), and a significant difference between the exercise group and the control group(p=.013). In conclusion, the 12-week Nordic walking exercise has positive effects on the body composition functions of the elderly women with Osteoarthritis, and has a positive effect on the improvement of upper limb muscular strength and lower limb flexibility in the health fitness factors. These effects are believed to have contributed effectively to the improvement of the level of pain by contributing to the improvement of physical and motor functions of the elderly women with Osteoarthritis. Therefore, it is considered that Nordic walking exercise, which enhances stability and balance of the patients with Osteoarthritis by using poles, is an effective exercise method for the improvement of the body and motor functions by lowering the pain of the joints and reducing the muscular strength and percentage body fat.

• Journal of Wetlands Research
• /
• v.7 no.2
• /
• pp.105-120
• /
• 2005

This study was carried out at Reed Marsh of Sihwa Lake from July 2003 to June 2004. We observed total(sum of maximum population) 5,752 individuals of 70 species including 12 species of ducks, 10 species of egrets, 6 species of wagtails and buntings, 4 species of eagles. The most dominant species was Spotbill Duck(Anas poecilorhyncha - 3,518 individuals, 61.16%), and other species were Mallard(Anas platyrhynchos - 540 individuals, 9.39%), Great Reed-Warbler(Acrocephalus arundinaceus - 217 individuals, 3.77%). Reed Marsh of Sihwa Lake were observed many kinds of protected species such as Great Bittern(Botaurus stellaris), Mandarin Duck(Aix galericulata), Chinese Sparrow Hawk (Accipiter soloensis), Eurasian Sparrow Hawk(Accipiter nisus), Japanese Buzzard(Buteo buteo), Hen Harrier(Circus cyaneus), Eurasian Hobby(Falco subbuteo), and Common Kestrel(Falco tinnunculus). Since the Reed Marsh of Sihwa Lake arrived many individuals of waterbird, crop damage by the waterbird occurred in the surrounding rice fields. It was an area adjacent to the reed marsh of sihwa lake such as Yoopori and Samhwari Bibongmyoun, Yamokri Maesongmyoun Hwaseong City. Bird of crop damage was ducks openly. The most species was Spot-billed Duck. Crop damage types by the Spot-billed Duck were grazing, used the grain up or lower in quality with step on the rice. Crop damage size was about 560bags of rice during the one month on August 2002. In 2003, After carrying out the various crop damage reduction countermeasures, which measured crop damage size in 2002's crop damage area. It happened about 152bags of rice during the two months from on August to September 2003. Migration routes of Spot-billed Duck were that it was migrated from up the sihwa lake to reed marsh. It took a rest at reed marsh and migrated the surrounding rice fields for the feeding action. In 2002, it was migrated direct from up the sihwa lake to in surrounding rice fields. But as environment of reed marsh was improved better than 2002, it was migrated to reed marsh because of reducing the energy attrition rate. Crop damage reduction countermeasures are get on ears to use explosion machine, searchlight, start-gun and patrol at regular intervals. Which was an effect short term. Indirect method is to make a feeding area of substitution at up the sihwa lake and reed marsh of sihwa lake.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.3 no.2
• /
• pp.25-36
• /
• 1995

It is important to separate the compostables from waste for successful operation of composting plant, since various compositions are mixed in it. For the separation of compostables, it is necessary to estimate total amounts of compostables from several sources. Based on it, required capacity and number of composting plant as well as proper waste collection and transportation system can be determined. So, amounts of garbage, major target material for composting. were estimated in this study. In survey of unit garbage generation(UGG). different estimation results would be obtained depending on the basis of its measurement. However, previous researches did not consider it. In this paper, the correlations between area and the number of user of garbage source were analyzed to find the related equations which were apllyed to estimation of total generation. Obtained results are as the following. Relative variations of measured UGG based on area and custumer are 62.5 and 52.8, respectively. In linear regression, related equation between area and custumer was Y=0.244X+59.0 (X=area, Y=custumer). The correlation factor r is 0.904. Equation Y=616.5X/(X+1215.4) was also obtained from linear regression using Monod equation (r=0.720). From the first order equation and measured data of UGG based on custumer, amounts of garbage generation from restaurant in Seoul and the whole country were calculated to 2043.9 ton/d and 9014.0 ton/d, respectively. But, the values calculated from measured data of UGG based on area were as low as 821.3 ton/d Cin Seoul) and 3821.0 ton/d(in the whole country). Consequently, the measurement of unit garbage generation based on the number of custumer was more favorable to lessen the points of survey and to guarantee the representative values. Especially, it would fit well on restaurant having statistics of area.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.5
• /
• pp.1-13
• /
• 2018

Divers types of Personal Mobility(PM) are appeared on the market after the Segway is introduced. PMs have propagated very rapidly with their ease of use, and accidents related with PM show a sudden increase. Many studies on the PM are performed as its trend, but dring safety of passengers are excluded. In this study, criteria which can be adopted for PM's driving safety evaluation are reviewed. Also result of driving safety evaluation on 3 types of PM(wheel chair, kickboard, scooter(seating/standing) and walking using deducted criteria is given. COG(Center of the gravity) and SM(Stability Metric) are finally selected two criteria among many of them used in other fields. COG indicates how the center of mass deviates from the direction of the gravity. SM is a normalized value of generated force when PM moves as internal force, angular momentum, and ground reaction force. 0 means stop, and negative value means rollover, so it can be used for safety evaluation of PM. Average and standard deviation of measurement are standard of safety on the COG analysis. Wheel chair is the most safe and kickboard is the most unstable on the COG analysis. Wheel chair is also ranked as top safe on the SM analysis. Among two riding types(seating and standing) on the scooter, seating type is evaluated more safer than standing type. It is proposed that more various type of PMs are need to get safety evaluation for drivers and devices themselves together.

• The Journal of Korean Academy of Sensory Integration
• /
• v.14 no.1
• /
• pp.31-40
• /
• 2016

Objective : This study aimed to provide the preliminary data as a pilot study on standardizing BOT-2 by using an assessment criteria linked to Bruininks-Oseretsky Test of Motor Proficiency (BOTMP) short form for the children with preschool years(4-6 year old) in South Korea. Methods : A total of 81 children aged 4-6 in Busan and Gimhae were participated in this study. They were evaluated by using BOT-2 SF. It provides the average values and standard deviations about the abilities of praxis along with descriptive statistical analyses, and has the verification of gender differences by using independent t-test and using ANOVA for discrepancies in the abilities of praxis. Results : There were significance difference in the total raw score between four and five (p=.000), the items on fine motor accuracy between five and six year olds (p=.014). Girls showed higher scores than boys in fine motor accuracy, fine motor integration and balance (p=.022, p=.006, p=.031). Also, mean raw scores of 4 and 5 year olds (p=.007, =.000), and the all age group's standard scores were higher than the age in American children who were the participants of BOT-2. Conclusion : This study suggested the average of each item with regard to the ability of motor praxis about the children of preschool ages and showed the dissimilarity in the ability of motor praxis between age and gender, also between the participants in this study and American children who were participants of BOT-2. The research could provide basic data for future studies to standardize BOT-2 SF for korean preschoolers.

• The Journal of Korean Academy of Prosthodontics
• /
• v.48 no.3
• /
• pp.181-188
• /
• 2010

Purpose: The purpose of this study was to compare the stress distribution characteristics of four different abutment connections on SS-$III^{(R)}$ fixture under occlusal loading, using 3-dimensional finite element method. Materials and methods: The fixture of SS-$III^{(R)}$ (Osstem, Korea) with 4 mm diameter and 11.5 mm length and 4 types of abutments were analyzed; Solid, Com-Octa, ComOcta Gold, and Octa abutment. The models were placed in the area of first molar in the mandible. The 4 loading conditions were; (1) the vertical loading of 100 N on the central fossa, (2) the vertical loading of 100 N on the buccal cusp, (3) the $30^{\circ}$ inclined loading of 100 N to lingual side on the central fossa, and (4) the $30^{\circ}$ inclined loading of 100 N to the lingual side on the buccal cusp. The 3G.Author program was used, the von-Mises stress was calculated and the stress contours were plotted on each part of the implant systems and the surrounding bone structures. Results: Regardless of abutment types and loading conditions, higher stress concentration was observed at the cortical bone. In cancellous bone, the highest stress was observed at apical portion and the maximum stress occurred at the implant neck. The higher internal stress was observed in the fixtures than in the bone. The lowest stress was observed at loading condition 1 and the stress concentration was also lower than any other loading conditions. Conclusion: Within the limitation of the result of this study, it seems that the abutment connection type does not affect much on the stress distribution of bone structure.

• The Journal of Korean Academy of Prosthodontics
• /
• v.53 no.3
• /
• pp.189-197
• /
• 2015

Purpose: The aim of this study was to assess the degree of awareness and actual practice of dental practitioners regarding infection control during prosthodontic treatment. Materials and methods: Study participants were composed of dentists, dental hygienists, dental technicians working at dental university hospital, general hospital, dental hospital and dental clinics in Daejeon, Korea (n=126). The questionnaires included the data on general characteristics, education, awareness and practice of infection control procedures during prosthodontic treatment through personal self-administration survey. Awareness and practice were measured by Likert scale ranging from 1 to 5. Statistical analysis was done by one-way ANOVA. Influence of awareness on practice was estimated by regression analysis. Results: 27.7% of the respondents answered that the infection control education regarding prosthodontic treatment is insufficient. The mean value of awareness and practice of infection control during the prosthodontic treatment were $2.72{\pm}0.80$, $1.58{\pm}0.88$, respectively. The mean value of practice who answered that had education curriculum at college was $1.62{\pm}0.9$, and $1.31{\pm}0.49$ who did not. The mean value of awareness who equipped guideline was $3.01{\pm}0.9$, and $2.56{\pm}0.70$ who did not. Conclusion: 1. The respondents who received the infection control education by college curriculum showed higher degree of practice than the respondents who did not. 2. The respondents who have appropriate infection control guidebook in their workplace showed higher degree of awareness than the respondents who did not. 3. There was a correlation between the awareness and practice of infection control during prosthodontic treatment; the degree of awareness becomes higher, so does the degree of practice. 4. During the prosthodontic treatment, the degree of practice was lower than the degree of awareness on infection control.

• The Journal of Korean Academy of Prosthodontics
• /
• v.50 no.3
• /
• pp.156-161
• /
• 2012

Purpose: This study was conducted to obtain difference in fracture strength according to the diameter of one-body O-ring-type of mini implant fixture, to determine the resistance of mini implant to masticatory pressure, and to examine whether overdenture using O-ring type mini implant is clinically usable to maxillary and mandibular edentulous patients. Materials and methods: For this study, 13 mm long one body O-ring-type mini implants of different diameters (2.0 mm, 2.5 mm and 3.0 mm) (Dentis, Daegu, Korea) were prepared, 5 for each diameter. The sample was placed at $30^{\circ}$ from the horizontal surface on the universal testing machine, and off-axis loading was applied until permanent deformation occurred and the load was taken as maximum compressive strength. The mean value of the 5 samples was calculated, and the compressive strength of implant fixture was compared according to diameter. In addition, we prepared 3 samples for each diameter, and applied loading equal to 80%, 60% and 40% of the compressive strength until fracture occurred. Then, we measured the cycle number on fracture and analyzed fatigue fracture for each diameter. Additionally, we measured the cycle number on fracture that occurred when a load of 43 N, which is the average masticatory force of complete denture, was applied. The difference on compressive strength between each group was tested statistically using one-way ANOVA test. Results: Compressive strength according to the diameter of mini implant was $101.5{\pm}14.6N$, $149{\pm}6.1N$ and $276.0{\pm}13.4N$, respectively, for diameters 2.0 mm, 2.5 mm and 3.0 mm. In the results of fatigue fracture test at 43 N, fracture did not occur until $2{\times}10^6$ cycles at diameter 2.0 mm, and until $5{\times}10^6$ cycles at 2.5 mm and 3.0 mm. Conclusion: Compressive strength increased significantly with increasing diameter of mini implant. In the results of fatigue fracture test conducted under the average masticatory force of complete denture, fracture did not occur at any of the three diameters. All of the three diameters are usable for supporting overdenture in maxillary and mandibular edentulous patients, but considering that the highest masticatory force of complete denture is 157 N, caution should be used in case diameter 2.0 mm or 2.5 mm is used.