• Journal of Korean Home Economics Education Association
• /
• v.33 no.1
• /
• pp.1-16
• /
• 2021

The purpose of this study was to investigate the needs of middle school students for the practical reasoning in a distance learning environment, to verify the needs differences based on the learner's personal characteristics, student-teacher interaction, and student-student interaction, and to investigate the relationships among student-teacher interaction, voluntary participation of students, and the students' perception of the extent to which practical reasoning is implemented in distance learning. For this purpose, 1,842 middle school students from seven schools in Gyeonggi, Daejeon, Chungbuk, and Sejong areas were surveyed online to investigate the importance of the practical reasoning questions and the how much practical reasoning is implemented in current distance learning. Among them, 1,095 responses were used for final analysis and descriptive statistics, independent sample t-test, one-way ANOVA, and path analysis were conducted. As a result of the study, first, middle school students acknowledged that the practical reasoning was important with the importance average 3.76. Based on the locus for focus model, the priorities of the needs in home economics class were examined, and the values and importance of the problem, and the ramification of the solution were considered to be of high priority. Second, characteristics of middle school students, student-teacher interaction and student-student interaction were found to have positive influence on needs for practical reasoning, while no difference were found by gender or voluntary participation in distance learning. Third, the voluntary participation of students and the student-teacher interaction in distance learning had a positive (+) significant effect on perceived implementation of practical reasoning, yet negative (-) significant effect on needs for practical reasoning.

• Journal of Korea Water Resources Association
• /
• v.54 no.12
• /
• pp.1339-1348
• /
• 2021

In accordance with the River Law, the basic river maintenance plan is established every 5-10 years with a considerable national budget for domestic rivers, and various river surveys such as the river section required for HEC-RAS simulation for flood level calculation are being conducted. However, river survey data are provided only in the form of a pdf report to the River Management Geographic Information System (RIMGIS), and the original data are distributedly owned by designers who performed the river maintenance plan in CAD format. It is a situation that the usability for other purposes is considerably lowered. In addition, when using surveyed CAD-type cross-sectional data for HEC-RAS, tools such as 'Dream' are used, but the reality is that time and cost are almost as close as manual work. In this study, RAUT (River Information Auto Upload Tool), a tool that can solve these problems, was developed. First, the RAUT tool attempted to automate the complicated steps of manually inputting CAD survey data and simulating the input data of the HEC-RAS one-dimensional model used in establishing the basic river plan in practice. Second, it is possible to directly read CAD survey data, which is river spatial information, and automatically upload it to the river spatial information DB based on the standard data model (ArcRiver), enabling the management of river survey data in the river maintenance plan at the national level. In other words, if RIMGIS uses a tool such as RAUT, it will be able to systematically manage national river survey data such as river section. The developed RAUT reads the river spatial information CAD data of the river maintenance master plan targeting the Jeju-do agar basin, builds it into a mySQL-based spatial DB, and automatically generates topographic data for HEC-RAS one-dimensional simulation from the built DB. A pilot process was implemented.

• Korean Journal of Breeding Science
• /
• v.42 no.2
• /
• pp.181-187
• /
• 2010

To understand the morphological differentiation of the 26 accessions of Foxtail Millet collected in Korea (15 accessions), China (7 accessions) and Pakistan (4 accessions), we analyzed 9 morphological characteristics such as plant height, panicle length, leaf number, tiller number, heading time, seed weight and panicle color etc. Most accessions of foxtail millet collected in Korea showed late heading time, tall plant height and long conical panicles. While foxtail millet accessions of Pakistan showed early heading time, short plant height and short conical panicles. In case of Chinese accessions, some accessions of them showed similar characteristics with Korean accessions, and the other showed similar characteristics to Pakistan accessions. In ANOVA analysis, most of quantitative characteristics such as plant height, leaf number, internode number and heading time showed significant differences among foxtail millet accessions collected from Korea, China and Pakistan. Principal component analyses clearly discriminate foxtail millet accessions of Korea from those of China and Pakistan. In PCA analysis, most of quantitative characters such as panicle length, leaf number and internode number greatly contributed in positive direction, whereas several quantitative characters such as tiller number, seed weight and panicle color contributed in negative direction on the first axis. Thus, these morphological characteristics could be used to classify the foxtail millet accessions collected in Korea, China and Pakistan. The present results could expand our understanding of the morphological variation in foxtail millet accessions from Korea, China and Pakistan, and also could be useful for foxtail millet germplasm preservation.

• Korean Journal of Breeding Science
• /
• v.42 no.1
• /
• pp.40-49
• /
• 2010

This study was conducted to examine genetic variation on leaf characteristics of Zelkova serrata populations. Leaf samples were obtained from eighteen populations and fourteen leaf characteristics such as leaf blade length, leaf width, leaf area and etc. were measured. In all leaf characteristics, there were significant differences among populations and among individuals within population. Most variance of leaf characteristics was contributed to among individuals within population except for length from leaf base to maximum width (x3) and the ratio of x3 to leaf blade length (x10). The relatively high variations of leaf characteristics were found at Gurye, Jungeup and Gyungju populations while Youngwol, Cheongsong, Youngchun populations showed the lower variation. There was high correlation among leaf characteristics related to leaf size, but not among the variables of ratio between leaf characteristics. Length from leaf base to maximum width(x3) and the ratio of x3 to x10 showed significant positive correlation with latitude and altitude of populations, which reflect the differences of mean annual temperature among populations. Mean annual rainfall of populations showed negative correlation with leaf blade length, leaf width, length from apex to first serration and leaf area. Four principal components (PC) were deduced from principal component analysis, which explain the 88.5% of total variance of leaf characteristics. Leaf area, length from leaf base to maximum width, serration number and petiole length showed the highest contribution to PC1, PC2, PC3, PC4, respectively. According to cluster analysis, the populations of Z. serrata were divided into two groups, which reflect the difference of mean annual temperature between groups. Within group, however, specific tendency of clustering was not observed among populattions.

• Journal of Nutrition and Health
• /
• v.52 no.2
• /
• pp.206-216
• /
• 2019

Purpose: Management of the metabolic risk factors in diabetes patients is essential for preventing or delaying diabetic complications. This study compared the levels of the metabolic risk factors in diabetes patients according to the income levels, and examined the secular trends in recent decades. Methods: The data from the Korea National Health and Nutrition Examination Survey 1998 ~ 2014 were used. The diabetes patients were divided into three groups based on their household income levels. General information was obtained through self-administered questionnaires, and the blood biomarkers and blood pressure data were obtained from a health examination. Multivariable linear regression models were used to compare the metabolic biomarker levels according to the household income levels, adjusting for potential confounding factors. Results: The fasting blood glucose, hemoglobin A1c, and blood lipid (total cholesterol, high-density lipoprotein (HDL) cholesterol, low-density lipoprotein (LDL) cholesterol, and triglyceride) levels were similar in the three groups. During the survey period of 16 years, the blood pressure showed a significant decreasing trend with time in all groups (p < 0.001). In contrast, the fasting blood glucose (p = 0.004), total cholesterol (p < 0.001), and LDL-cholesterol levels (p = 0.007) decreased significantly, and the HDL-cholesterol level (p < 0.001) increased significantly in the highest-income groups. In the lowest-income group, the fasting blood glucose (p = 0.02), total cholesterol (p < 0.001), and triglyceride (p = 0.003) levels showed a significant decreasing trend over time. On the other hand, the middle-income group showed no significant change in any of the metabolic risk factors except for blood pressure. Conclusion: The level of management of metabolic risk factors according to the income level of Korean diabetes patients was similar. On the other hand, the highest- and lowest-income groups showed positive trends of management of these factors during 16 years of observation, whereas the middle-income group did not show any improvement.

• Korean Journal of Heritage: History & Science
• /
• v.46 no.3
• /
• pp.212-228
• /
• 2013

Stone cultural heritages are repaired by the use of metal stiffeners. The problem is that this type of repair has been based on the experience of workers without specific guidelines and has caused various problems. This is to suggest the structural reinforcement and behavioral characteristics of metal rods to minimize the secondary damage of materials and have the specimens tested and verified to establish the guidelines on how to insert metal stiffeners. When only epoxy resin is applied to the cut surface, only 70% of the properties of the parent material are regenerated and it is required to structurally reinforce the metal stiffener for the remaining 30%. The metal rod is under the structural behavior after the brittle failure of stone material and the structural behavior does not occur when the metal stiffener is below 0.251%. When it accounts for over 0.5%, it achieves structural reinforcement, but causes secondary damage of parent materials. The appropriate ratio of metal stiffener for the stone material with the strength of $1,500kgf/cm^2$, therefore, should be between 0.283% and 0.377% of the cross section of attached surface to achieve reversible fracture and ductility behavior. In addition, it is more effective to position the stiffeners at close intervals to achieve the peak stress of metal rod against bending load and inserting the stiffener into the upper secions is not structurally supportive, but would rather cause damage of the parent material. Thus, most stiffeners should be inserted into the lower part and some into the central part to work as a stable tensile material under the load stress. The dispersion effect of metal rods was influenced by the area of reinforcing rods and unrelated to their diameter. However, it ensures stability under the load stress to increase the number of stiffeners considering the cross section adhered when working on large-scale structures. The development length is engineered based upon the diameter of stiffener using the following formula: $l_d=\frac{a_tf_y}{u{\Sigma}_0}$. Also, helically-threaded reinforcing rods should be used to perform the behaviors as a structural material.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.3
• /
• pp.211-218
• /
• 2019

Purpose: The purpose of the present study was to compare the accuracy of four different metal copings fabricated by CAD/CAM technology and to evaluate clinical effectiveness. Materials and methods: Composite resin tooth of the maxillary central incisor was prepared for a metal ceramic crown and duplicated metal die was fabricated. Then scan the metal die for 12 times to obtain STL files using a confocal microscopy type oral scanner. Metal copings with a thickness of 0.5 mm and a cement space of $50{\mu}m$ were designed on a CAD program. The Co-Cr metal copings were fabricated by the following four methods: Wax pattern milling & Casting (WM), Resin pattern 3D Printing & casting (RP), Milling & Sintering (MS), Selective laser melting (SLM). Silicone replica technique was used to measure marginal and internal discrepancies. The data was statistically analyzed with One-way analysis of variance and appropriate post hoc test (Scheffe test) (${\alpha}=.05$). Results: Mean marginal discrepancy was significantly smaller in the Group WM ($27.66{\pm}9.85{\mu}m$) and Group MS ($28.88{\pm}10.13{\mu}m$) than in the Group RP ($38.09{\pm}11.14{\mu}m$). Mean cervical discrepancy was significantly smaller in the Group MS than in the Group RP. Mean axial discrepancy was significantly smaller in the Group WM and Group MS then in the Group RP and Group SLM. Mean incisal discrepancies was significantly smaller in the Group RP than in all other groups. Conclusion: The marginal and axial discrepancies of the Co-Cr coping fabricated by the Wax pattern milling and Milling/Sintering method were better than those of the other groups. The marginal, cervical and axial fit of Co-Cr copings in all groups are within a clinically acceptable range.

• Korean Journal of Heritage: History & Science
• /
• v.44 no.4
• /
• pp.42-55
• /
• 2011

The basic approach of this study was to take the theory of cultural fluctuations to investigate the early modern and modern patterns of the use of ox carts and@ the social and economic appropriateness and cultural significance of ox carts. The study chose a village that was the only place that used ox carts in Bugye-myeon. The findings will help to understand how traditional cultural elements would continue or change according to the natural, geographical, economical, and cultural characteristics of a village. Located in Gaho-2-ri, Bugye-myeon, Gunwi-gun, Gyeongbuk Province, Dongrim Village started to use ox carts during the Japanese rule and replaced the traditional version with an improved one in 1972 when a reservoir was built. Until the 1970s, they used ox carts to carry agricultural products and luggage and to visit the markets in distant Bugye-myeon or Gunwi-eup. In the early 1980s when a cultivator was first introduced into the village, ox carts gradually disappeared in the village and eventually remained as a mere means of transportation. As the younger generations were active in introducing modern means of transportation, a cultivator became the main means of transportation in the village in the 1980s and a truck since the latter half of the 1990s. Despite those changes, however, the elderly in their seventies or older continued to use ox carts. With aged labor and inability to use modern means of transportation, they grew cows and oxen to cultivate the inclined fields and gain easy access to fields distributed in distant locations and continued to ox carts through reform. In Dongrim Village, the heritage of using reformed ox carts is the practice of appropriate technology by the old farmers and a cultural representation of an aged agricultural society. That is, the elderly recognized the appropriateness and practicality of traditional culture and renewed a traditional means of transportation called an ox cart. The phenomenon of the old men and women frequently using ox carts in an agricultural village in the mountain with geographical limitations has settled down as a cultural representation of the elderly in Dongrim Village. The continuing usage of ox carts in Dongrim Village is attributed to the fact that ox carts well suit the natural, geographical, and economic aspects of the village and the cultural inertia of the elderly with the aging of the farmers. Thus it is once again shown that human beings transmit and alter culture according to their overall situations and conditions.

• Korean Journal of Heritage: History & Science
• /
• v.38
• /
• pp.329-358
• /
• 2005

The Three storied Stone pagoda in Gameunsa Temple site, one of the early staged stone pagodas, has been known as a standard for Silla stone pagodas. A stone pagoda is not only a stone art work and but also a stone structure. Most studies and investigation of the stone pagoda has done mainly based on style and chronological research according to an art historical view. However, there is not an attempt to research the stone pagoda as a stone architecture. Most Korean experts at the stone pagoda has art history in their background. Engineers who can understand the structure of the stone pagoda are very limited. More architectural and engineering approach is need to research not only art historial understanding but also safety as a structure. We can find many technical know-how from our ancestors who made stone pagodas. 1. To reduce any deformation such as relaxation and sinking of BuJae which is caused by a heavy load, the BuJae (consist of a foundation stone and lower stereobates) should be enlarged. 2. A special construction method for connection between Myonsuk and Tangjoo was invented. This unique method is not used any longer after the Three storied Stone pagoda in Gameunsa Temple site. 3. The upper BuJae and the lower BuJae are missed each other by making a difference of Okgaesuk and Okgaebatchim in size. It is done for a distribution of perpendicular load and a prevention for relaxation of BuJae. 4. The center of gravity in the BuJae is located to the center of the stone pagoda by trimming the upper surface of the Okgaebatchim into a convex shape. The man who made stone pagodas had excellent knowledge on the engineering and techniques to understand the structure of the stone pagodas. We can confirm it as follows: the enlarged BuJae, dislocated connection between upper Bujae and lower BuJae, and moving the center of gravity close to the center of the stone pagoda.

• Journal of the Society of Disaster Information
• /
• v.17 no.3
• /
• pp.487-499
• /
• 2021

Purpose:The purpose of the paper is to review the problems of performance enhancement of safety certification standards and to suggest directions for improvement in order to rationalize safety certification standards for future industrial development and environmental changes. Method: The problems and limitations of the safety certification system are summarized through literature review and interview with manager, and the status of safety certification standards is classified into design standards, performance standards, and detailed standards, and the status analysis is performed. In addition, by synthesizing the results of the investigation and analysis, improvements are suggested to improve the performance of the safety certification standards. Result: Through the survey, the problems and limitations of safety certification could be grouped into six categories: government-led certification system operation, standardized certification standards, long time required to improve certification, poor certification standards preparation system, and lack of reflection of industry opinions. And, as a result of analyzing the certification standards by dividing them into performance and design standards, in the case of machinery, equipment, and protection devices, the design standards were high at 69.7% and 64.9%, whereas in the case of protective equipment, the performance standards were high at 61.1%. In order to improve the performance of safety certification standards centered on design standards, it is necessary to determine the possibility of performance enhancement of the certification standards and determine the feasibility of the inspection test method. In order to improve performance, it was reviewed that it was necessary to establish a systemic foundation and infrastructure, such as strengthening the Product Liability Act, systematizing market monitoring, etc., distributing certification test tasks, and participating in the preparation of certification standards by the private sector. Conclusion: Through this study, the problems and limitations of Korea's safety certification system were summarized and the necessity for performance improvement was reviewed. Performance improvement of safety certification standards is a matter that requires preparatory work, such as legislative revision and infrastructure construction, and requires mid-to-long-term promotion. In addition, rather than improving the overall safety certification standards, the performance requirements for each item subject to certification should be reviewed and promoted, and details should be specified through additional research.