• Journal of Korean Society of Forest Science
• /
• v.97 no.6
• /
• pp.627-633
• /
• 2008

This study was conducted to estimate volume growth rates for major Quercus species distributed in Korea, and based on the data collected from the 5th National Forest Inventory. Volume growth rates were estimated by each age class for each species, and their similarity or distinction was statistically analyzed. It was also intended to compare the resulted volume growth rates with the existing growth rates, and to develope a volume growth rate estimation model for the Quercus species. Six major Quercus species were considered in this study; Quercus acutissima, Quercus aliena, Quercus serrata, Quercus variabilis, Quercus dentata, and Quercus mongolica. Based on the data collected from the 5th National Forest Inventory, the diameter growth rates and the height growth rates were estimated for each species, and then the volume growth rates were estimated with the given diameter and height growth rates. To examine the distinction between species or age classes, statistical analyses such as ANOVA and Duncan's multiple range test were applied. The results indicated that the volume growth rate was 10% in the age class II, 6% in the age class III, and lower in the subsequent classes. In addition, the volume growth rates of Quercus acutissima, Quercus aliena, and Quercus serrata were relatively high compared to those of Quercus variabilis, Quercus dentata, and Quercus mongolica. According to their growth rates, the six Quercus species were classified into two groups; high-growth-rate group and low-growth-rate group. Statistical analysis conducted to examine the difference between and within the groups showed that there is no significant difference within groups, while significant between groups. Based on the results, volume growth rate estimation model were finally developed for each group. The classification of the Quercus species suggested in this study was not the same with that of existing volume growth estimation. Thus, it is necessary to improve the existing volume growth rate or its estimation system.

• Journal of Family Resource Management and Policy Review
• /
• v.25 no.1
• /
• pp.15-34
• /
• 2021

Purpose : This study aims to identify the influence of individual, parental, workplace, and policy variables on the intention of marriage of unmarried workers. The results of the study can be used as a basis to come up with policy and practical measures to increase these workers' intention of marriage. Methods : Data was collected from 480 participants through a questionnaire. The measuring tools in this study were tested for reliability and validity. In addition, technical statistics, ANOVA, correlation analysis, and hierarchical regression analysis were performed by SPSS 18.0. Results : First, unmarried workers' willingness to marry was higher above the average. Second, significant differences in the unmarried workers' intention of marriage were revealed based on gender, age, level of education, total assets, and debt status. Significant associations were also found with parents' economic levels and the possibility of parental support for housing and marriage expenses. The differences in response based on employment patterns, job satisfaction, and family-friendly organizational culture were also significant. The correlation between policy variables and marriage intentions also showed the necessity of a funded housing policy and a marriage preparation policy. Third, based on the hierarchical regression analysis using personal, parental, and workplace variables to identify the factors affecting unmarried workers' willingness to marry, it is clear that gender, age, and the likelihood of parental support for housing and marriage expenses have a significant impact. A family-friendly organizational culture and funded housing policy were also significant contributors. Conclusion : The study found that the funded housing policy was the most important factor affecting unmarried office workers' willingness to marry. Additionally, the possibility of parental support for housing and marriage expenses and a family-friendly organizational culture at work were found to have an important impact on the improvement of unmarried workers' willingness to marry.

• The Journal of Korean Academy of Prosthodontics
• /
• v.51 no.4
• /
• pp.315-322
• /
• 2013

Purpose: To evaluate the axial displacement of implant-abutment assembly after cyclic loading in internal tapered connection system. Materials and methods: External butt-joint connection implant and internal tapered connection implant were connected with three types of abutment for cement-retained prostheses, i.e. external type abutment (Ext group), internal tapered 1-piece abutment (Int-1 group), and internal tapered 2-piece abutment (Int-2 group). For each group, 7 implants and abutments were used. The implantabutments assemblies were clamped into the implant holder for vertical loads. A dynamic cyclic loading was applied for $150{\pm}10N$ at a frequency of 4 Hz. The amount of axial displacement of the abutment into the implant was calculated at each cycle of 0, 5, 10, 50, 100, 1,000, 5,000, and 10,000. A repeated measures analysis of variance (ANOVA) for the overall effect of cyclic loading and the pattern analysis by linear mixed model were used for statistical analysis. Differences at P<.05 were considered statistically significant. Results: The mean axial displacement after 10,000 cycles were $0.714{\pm}0.488{\mu}m$ in Ext group, $5.286{\pm}1.604{\mu}m$ in Int-1 group, and $11.429{\pm}1.902{\mu}m$ in Int-2 group. In the pattern analysis, Int-1 and Int-2 group showed continuous axial displacement at 10,000 cycles. There was no declining pattern of axial displacement in the Ext group. Conclusion: The pattern of linear mixed model in Ext group showed no axial displacement. There were continuous axial displacements in abutment-implant assemblies in the Int-1 and Int-2 group at 10,000 cycles. More axial displacement was found in Int-2 group than in Int-1 group.

• The Journal of Korean Academy of Prosthodontics
• /
• v.49 no.2
• /
• pp.120-127
• /
• 2011

Purpose: The purpose of this study was to examine the effects of chromium chloride addition on coloration, mechanical property and microstructure of 3Y-TZP. Materials and methods: Chromium chloride was weighed as 0.06, 0.12, and 0.25 wt% and each measured amount was dissolved in alcohol. $ZrO_2$ powder was mixed with each of the individual slurry to prepare chromium doped zirconia specimen. The color, physical properties and microstructure were observed after the zirconia specimen were sintered at $1450^{\circ}C$. In order to evaluate the color, spectrophotometer was used to analyze the value of $L^*$, $C^*$, $a^*$ and $b^*$, after placing the specimen on a white plate, and measured according to the International Commission on Illumination (CIE) standard, Illuminant D65 and SCE system. The density was measured in the Archimedes method, while microstructures were evaluated by using the scanning electron microscopy (SEM) and XRD. Fracture toughness was calculated Vickers indentation method and indentation size was measured by using the optical microscope. The data were analyzed with 1-way ANOVA test (${\alpha}$ = 0.05). The Tukey multiple comparison test was used for post hocanalysis. Results: 1. Chromium chloride rendered zirconia a brownish color. While chromium chloride content was increased, the color of zirconia was changed from brownish to brownish-red. 2. Chromium chloride content was increased; density of the specimen was decreased. 3. More chromium chloride in the ratio showed increase size of grains. 4. But the addition of chromium chloride did not affect the crystal phase of zirconia, and all specimens showed tetragonal phase. 5. The chromium chloride in zirconia did not showed statistically significant difference in fracture toughness, but addition of 0.25 wt% showed a statistically significant difference (P<.05). Conclusion: Based on the above results, this study suggests that chromium chlorides can make colored zirconia while adding in a liquid form. The new colored zirconia showed a slight difference in color to that of the natural tooth, nevertheless this material can be used as an all ceramic core material.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.36 no.3
• /
• pp.183-195
• /
• 2020

Purpose: The purpose of this study is to compare the flexural strength of CAD/CAM denture base resins with conventional denture base resins based on their thicknesses. Materials and Methods: For the conventional denture base resins, Lucitone 199^® (C-LC) was used. DIOnavi - Denture (P-DO) and DENTCA Denture Base II (P-DC) were taken for the 3D printing denture base resins. For the prepolymerized PMMA resins, Vipi Block Gum (M-VP) and M-IVoBase^® CAD (M-IV) were used. The final dimensions of the specimens were 65.0 mm x 12.7 mm x 1.6 mm / 2.0 mm / 2.5 mm. The 3-point bend test was implemented to measure the flexural strength and flexural modulus. Microscopic evaluation of surface of fractured specimen was conducted by using a scanning electron microscope (SEM). After testing the normality of the data, one-way ANOVA was adopted to evaluate the differences among sample groups with a significance level of P = 0.05. The Tukey HSD test was performed for post hoc analysis. Results: Under the same thicknesses, there are significant differences in flexural strength between CAD/CAM denture base resins and conventional denture base resins except for P-DO and C-LC. M-VP showed higher flexural strength than conventional denture base resins, P-DC and M-IV displayed lower flexural strength than conventional denture base resins. Flexural modulus was highest in M-VP, followed by C-LC, P-DO, P-DC, M-IV, significant differences were found between all materials. In the comparison of flexural strength according to thickness, flexural strength of 2.5 mm was significantly higher than that of 1.6 mm in C-LC. Flexural strength of 2.5 mm and 2.0 mm was significantly higher than that of 1.6 mm in P-DC and M-VP. In M-IV, as the thickness increases, significant increase in flexural strength appeared. SEM analysis illustrates different fracture surfaces of the specimens. Conclusion: The flexural strength of different CAD/CAM denture base resins used in this study varied according to the composition and properties of each material. The flexural strength of CAD/CAM denture base resins was higher than the standard suggested by ISO 20795-1:2013 at a thickness of 1.6 mm or more though the thickness decreased. However, for clinical use of dentures with lower thickness, further researches should be done regarding other properties at lower thickness of denture base resins.

• Journal of agriculture & life science
• /
• v.50 no.3
• /
• pp.1-11
• /
• 2016

With increasing interest, there have been studies on LiDAR(Light Detection And Ranging)-based DEM(Digital Elevation Model) to acquire three dimensional topographic information. For producing LiDAR DEM with better accuracy, Filtering process is crucial, where only surface reflected LiDAR points are left to construct DEM while non-surface reflected LiDAR points need to be removed from the raw LiDAR data. In particular, the changes of input values for filtering algorithm-constructing parameters are supposed to produce different products. Therefore, this study is aimed to contribute to better understanding the effects of the changes of the levels of GroundFilter Algrothm's Mean parameter(GFmn) embedded in FUSION software on the accuracy of the LiDAR DEM products, using LiDAR data collected for Hwacheon, Yangju, Gyeongsan and Jangheung watershed experimental area. The effect of GFmn level changes on the products' accuracy is estimated by measuring and comparing the residuals between the elevations at the same locations of a field and different GFmn level-produced LiDAR DEM sample points. In order to test whether there are any differences among the five GFmn levels; 1, 3, 5, 7 and 9, One-way ANOVA is conducted. In result of One-way ANOVA test, it is found that the change in GFmn level significantly affects the accuracy (F-value: 4.915, p<0.01). After finding significance of the GFmn level effect, Tukey HSD test is also conducted as a Post hoc test for grouping levels by the significant differences. In result, GFmn levels are divided into two subsets ('7, 5, 9, 3' vs. '1'). From the observation of the residuals of each individual level, it is possible to say that LiDAR DEM is generated most accurately when GFmn is given as 7. Through this study, the most desirable parameter value can be suggested to produce filtered LiDAR DEM data which can provide the most accurate elevation information.

• 한국체육학회지인문사회과학편
• /
• v.54 no.1
• /
• pp.553-566
• /
• 2015

This study was performed to identify the effects of different intensities of regular aerobic exercise on erythropoietin (EPO) and BDNF levels, and cognitive function and working memory in middle-aged women. Women aged 40 to 60 years residing in G-gu, Y-si, Gyeonggi-do were divided into 3 groups: control group, moderate-intensity aerobic exercise group and high-intensity aerobic exercise. All groups were asked to exercise at the given intensities, twice a week for a total of 12 weeks. Blood samples were collected from participants on week 0 (before exercising), week 6 and week 12, and then cognitive function and working memory tests were followed to measure erythropoietin (EPO) and BDNF levels, cognitive function and working memory. Repeated measures ANOVA, univariate analysis and follow-up test were performed on all data to compare the group, period and interaction through a SPSS. As a result, a significant difference over time was observed in EPO, BDNF, cognitive function and working memory; therefore, a follow-up one-way ANOVA analysis was performed on each group. As a result of analysis, a significant increase in erythrocyte, hematocrit, BDNF level and working memory was observed in moderate-intensity aerobic exercise group while erythrocyte and working memory were significantly increased inhigh-intensity aerobic exercise group. When comparing the results between the groups, the level of hematocrit was shown to be significantly higher in both moderate-and high-intensity aerobic group than the control group and also the higher level of hemoglobin was observed in both moderate-and high-intensity aerobic group comparing to control group. Considering the results of this study, therefore, a 12-week long aerobic exercise at moderate to high intensity positively affected EPO and BDNF levels, cognitive function and working memory in middle-aged women.

• Journal of agricultural medicine and community health
• /
• v.43 no.1
• /
• pp.18-30
• /
• 2018

Objectives: This study was conducted to examine the association of serum Vitamin D with insulin resistance and ${\beta}-cell$ function in Korean health checkup examinees. Methods: This study subjects were 374 healthy adults (199 males, 175 females) over the age of 20, who visited a general hospital medical center located in Haenam-gun, Jeollanam-do. To find the association of Vitamin D with HOMA-IR and $HOMA-{\beta}$, the used statistical analysis were ANOVA and ANCOVA. Results: Of the study subjects, the level of serum Vitamin D defined by deficient group, insufficient group and sufficient group was 38.5%, 48.1% and 13.4%, respectively. According to the level of serum Vitamin D, the mean values of HOMA-IR were $1.92{\pm}1.08$ in sufficient group, $1.99{\pm}1.04$ in the insufficient group and $2.91{\pm}1.05$ in deficient group and there were statistically significant different(p<0.001). The mean values of $HOMA-{\beta}$ were $84.69{\pm}1.07$ in sufficient group, $78.41{\pm}1.04$ in the insufficient group and $80.48{\pm}1.04$ in deficient group, and there were not significant. As a result of ANCOVA, adjusted mean of HOMA-IR were statistically significant different (p<0.001), but those of $HOMA-{\beta}$ were not statistically significant according to the level of serum Vitamin D. Conclusion: The insufficient level of serum Vitamin D was relatively high in healthy adults who live in rural area, and it was found that HOMA-IR significantly increased when Vitamin D was deficient. To prevent insulin resistance or diabetes, it is necessary to provide sufficient information related to sufficient production of Vitamin D such as Vitamin D supplement, sun exposure, food intake and etc.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.14 no.2
• /
• pp.50-54
• /
• 2010

Purpose: The uptake of $^{18}F$-FDG is often observed in normal cell of colon to patients who have non-insulin-dependent diabetes mellitus and had taken anti-diabetic drugs including Metformin in PET/CT scan. In this study, the region of colon was compared between the patients who took anti-diabetic drugs including Metfomin and other patients who took the other anti-diabetic drugs through SUV measurements. Materials and Methods: A hundred eighty patients were studied. 120 patients who have non-insulin-dependent diabetes mellitus (Including Metformin: 60, Excluding Metformin: 60) and 60 patients as a control group were composed. The patient fasted at least 6 hours before receiving an intravenous injection of 370-592 MBq (10-16 mCi) of $^{18}F$-FDG. Scanning from the base of the skull though the mid thigh was performed using the Discovery STe PET/CT Equipment (GE Healthcare, Milwaukee, WI, USA). The highest uptake region was measured SUV among ascending, transverse and descending colon. Results: The values of patients who took the anti-diabetic drugs including Metformin were $6.16{\pm}3.64$ g/mL, $4.41{\pm}2.94$ g/mL, and $5.46{\pm}2.44$ g/mL. The patients who took the anti-diabetic drugs which does not have Metformin were $3.05{\pm}1.39$ g/mL, $2.08{\pm}0.97$ g/mL and $3.15{\pm}1.85$ g/mL. The control group were $2.02{\pm}0.88$ g/mL, $1.68{\pm}0.87$ g/mL and $2.19{\pm}1.88$ g/mL. Conclusion: The effect of the intake of Metformin was observed from the SUV on region of large bowel in this study. Thus, it could be helpful for the results by identifying the ingredient of anti-diabetic drug before the examination and the possibility of interpretation of false positive will be reduced.

• Korean Journal of Environment and Ecology
• /
• v.33 no.6
• /
• pp.636-644
• /
• 2019

The purpose of this study was to investigate the callings of nocturnal birds using bioacoustic recording technology to identify species and to analyze the ecological characteristics of each species. Three sites - Seoraksan National Park, National Institute of Ecology, and Mudeungsan National Park - were investigated. The investigation period was from the middle of April 2018 to early March 2019 for Seoraksan national park, from late February of 2018 to the middle of February 2019 for the National Institute of Ecology, and from the middle of February 2018 to the end of August 2018 for Mudeungsan National Park. The main research results are as follows. Firstly, nocturnal bird species identified by the survey included Caprimulgus indicus, Otus sunia, Zoothera aurea, Bubo bubo, and Strix uralensis, 5 species in total. Secondly, the breeding call period of each species was from early May to early August for C. indicus, from early April to the end of September for O. sunia, from early March to early October for Z. aurea, from late September to early February for B. bubo, and from mid-January to early March for S. uralensis. Thirdly, the mating call rhythm was between 16:00 and 10:00 on the following day for all the observed species in the three regions, and the peak time zone was from 20:00 to 06:00 on the following day. Fourthly, there was no correlation between the cumulative call frequency and the precipitation for each species. Fifthly, the mean temperature during the period when the specific calls of nocturnal birds were detected was -4.00 ℃ for S. uralensis, 2.58 ℃ for B. bubo, 13.66 ℃ for Z. aurea, 19.50 ℃ for O. sunia, and 20.77 ℃ for C. indicus. The ANOVA results showed that there was a significant difference in mean temperature for the calling by species and that the mean temperature was S. uralensis, B. bubo, Z. aurea, and O. sunia-C. indicus, in the ascending order, for 4 groups in total. The period of the specific mating calls confirmed by the study is a period in which the frequency of calls was the highest among the periods when the specific calls were detected. Since it is associated with the known mating period of each species, the period of the high frequency of calls confirmed by the bioacoustic monitoring can be regarded as the mating season. This study is meaningful in that it is the early research that has used the bioacoustic recording technology to identify species and ecological characteristics of species of nocturnal birds in Korea.