• Transactions of the Korean hydrogen and new energy society
• /
• v.27 no.1
• /
• pp.95-105
• /
• 2016

Spray-dried NiO-based oxygen carriers developed for chemical looping combustion required high calcination temperatures above $1300^{\circ}C$ to obtain high mechanical strength applicable to circulating fluidized-bed process. In this study, the effect of CBB ($CaO{\cdot}BaO{\cdot}B_2O_3$) addition, as a binder, on the physical properties and oxygen transfer reactivity of spray-dried NiO-based oxygen carriers was investigated. CBB addition resulted in several positive effects such as reduction of calcination temperature and increase in oxygen transfer capacity and porosity. However, oxygen transfer rate was considerably decreased. This was more apparent when a higher amount of CBB was added and MgO was added together. From the experimental results, it is concluded that CBB added NiO-based oxygen carriers are not suitable for chemical looping combustion and a new method to reduce calcination temperature while maintaining high oxygen transfer rate of NiO-based oxygen carriers should be found out.

• Journal of Powder Materials
• /
• v.12 no.5 s.52
• /
• pp.336-344
• /
• 2005

In the present study, the focus is on the effect of cobalt oxide powder in the carbothermal reduction of the titanium-cobalt-oxygen based oxide powder by solid carbon for the optimizing synthesis process of ultra fine TiC/Co composite powder. The titanium-cobalt-oxygen based oxide powder was prepared by the combination of the spray drying and desalting processes using the titanium dioxide powder and cobalt nitrate as the raw materials. The titanium-cobalt-oxygen based oxide powder was mixed with carbon black, and then this mixture was carbothermally reduced under flowing argon atmosphere. Changes in the phase structure and thermal gravity of the mixture during carbothermal reduction were analysed using XRD and TGA. Titanium-cobalt-oxygen based oxide powder desalted at $600^{\circ}C$ had a mixture of $TiO_2\;and\;Co_{3}O_4$. And the one desalted at $800^{\circ}C$ had a mixture of $TiO_2\;and\;CoTiO_3$. In the case of the former powder, the reduction of cobalt oxide powder in the titanium-cobalt-oxygen based oxide powder occurred at lower temperature than the latter one. However, the carbothermal reduction of titanium dioxide powder in the titanium-cobalt-oxygen based oxide powder with a mixture of $TiO_2\;and\;Co_{3}O_4$ occurred at higher temperature than the one with a mixture of $TiO_2\;and\;CoTiO_3$. And also, the former powder showed a lower TiC formation ability than the latter one.

• Korean Journal of Materials Research
• /
• v.22 no.10
• /
• pp.531-538
• /
• 2012

Hollow silica spheres were prepared by spray drying of precursor solution of colloidal silica. The precursor solution is composed of 10-20 nm colloidal silica dispersed in a water or ethanol-water mixture solvent with additives of tris hydroxymethyl aminomethane. The effect of pH and concentrations of the precursor and additives on the formation of hollow sphere particles was studied. The spray drying process parameters of the precursor feeding rate, inlet temperature, and gas flow rate are controlled to produce the hollow spherical silica. The mixed solvent of ethanol and water was preferred because it improved the hollowness of the spheres better than plain water did. It was possible to obtain hollow silica from high concentration of 14.3 wt% silica precursor with pH 3. The thermal conductivity and total solar reflectivity of the hollow silica sample was measured and compared with those values of other commercial insulating fillers of glass beads and $TiO_2$ for applications of insulating paint, in which the glass beads are representative of the low thermal conductive fillers and the $TiO_2$ is representative of infrared reflective fillers. The thermal conductivity of hollow silica was comparable to that of the glass beads and the total solar reflectivity was higher than that of $TiO_2$.

• Korean Journal of Food Science and Technology
• /
• v.40 no.2
• /
• pp.190-193
• /
• 2008

Bovine hepatic extract is recognized as possessing detoxifying activity against various liver diseases. In orderto develop a process for its mass production, various enzymatic hydrolysis conditions were tested, and bovine hepatic extracts were prepared. These extracts were then examined for composition, microorganism levels, and vitamin $B_{12}$ content. Among the enzymes tested, papain was selected based on yields for dry residue and amino nitrogen. The other enzymes tested included bromelain, ficin, pancreatin, and protease NP. The optimal hydrolysis conditions were established at 65$^{\circ}C$ for 24 hr, with an addition of 1%(w/w) papain to the beef liver. The prepared spray-dried bovine hepatic extract showed an 11% recovery yield on a raw beef liver basis, with 95% dry residue and 11.8% total nitrogen content. Microorganisms were not detected in the dried extract, and its vitamin $B_{12}$ content was 4.1 ${\mu}$g/g. In summary, the conditions established in this study could be applied for the high yield mass production of bovine hepatic extract.

• Journal of the Korean Electrochemical Society
• /
• v.22 no.3
• /
• pp.112-121
• /
• 2019

In this study, silicon / carbon nanotube / carbon composite particles with high capacity were fabricated by using micro-sized silicon particles and carbon nanotubes as an anode material for lithium ion batteries. The silicon / carbon nanotube / carbon composite particles were prepared by spray drying method to prepare spherical composite particles. The composite particles have the network structure of the carbon nanotubes around the silicon particles, in which the silicon particles and the carbon nanotubes are bonded by amorphous carbon. It appears that the volume expansion of silicon is effectively buffered and the electrical contact is maintained in the network structure of the composite particles during charge-discharge cycles.

• Journal of Life Science
• /
• v.27 no.7
• /
• pp.754-759
• /
• 2017

The 100 l culture system was made on the basis of LED light, and Nannochloropsis oculata was cultured in f/2 medium at light intensity ($100{\mu}mol/m^2/s$), culture temperature ($20^{\circ}C{\pm}1^{\circ}C$) and LD cycle (12hr). As a result, the maximum biomass of 1.07 g/l was cultured as a result of 100 l mass culture at $100{\mu}mol/m^2/s$ and 24 mg/l nitrate concentration in LED blue (475 nm). The extraction was carried out using sonicator, homogenizer and chemical method 0.5M HCl shredding method. The contents of chlorophyll a, chlorophyll b and carotenoid were 1.6, 0.5 and 0.3 mg/g cell. When using homogenizer, it was measured at 1.0, 0.6 and 0.2 mg/g cell. The chemical breakdown method of 0.5M HCl, chlorophyll a, b, and carotenoid contents were measured as 0.9, 0.8, 0 mg/g cell. The highest amount of biomass during the distruption time was measured at 3.6 mg/g cell at 15 min disintegration and acetone, 3.6 mg/g cell of acetone, methanol, and ethanol were measured as effective solvents. Concentration was measured by using microfilter, disk type continuous centrifuge and tubular type continuous centrifuge were 16.0, 1.1 and 0.5 g/l, respectively. Four kinds of equipment such as hot air dryer, vacuum dryer, spray dryer and freeze dryer were tested to optimize the drying process. As a result, the recovery rates of spray dryer and freeze dryer were 80% and 60%.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.24 no.6
• /
• pp.268-273
• /
• 2014

$Y_2O_3$ ceramic specimens were fabricated from the granular powder, obtained by spray drying process from the slurry. The slurry was prepared by mixing PVA binder, NaOH for Ph control, PEG and $Y_2O_3$ powder. The $Y_2O_3$ specimen was shaped in size of ${\phi}14mm$ and then sintered at $1650^{\circ}C$. The characteristics, microstructure, densities and plasma resistance of the $Y_2O_3$ specimens were investigated with the function of forming pressure and sintering time. $Y_2O_3$ specimens were exposed under the $CHF_3/O_2/Ar$ plasma, the dry etching treatment of specimens was carried out by the physical reaction etching of $Ar^+$ ion beam and the chemical reaction etching of $F^-$ ion decomposed from $CHF_3$. With increasing sintering time, $Y_2O_3$ specimens showed relatively high density and strong resistance in plasma etching test.

• Korean Chemical Engineering Research
• /
• v.54 no.6
• /
• pp.786-791
• /
• 2016

Spherical graphene balls were fabricated by an aerosol spray drying process after reduced graphene oxide was prepared by the liquid phase reaction using glucose as an environment-friendly reducing agent. Spherical morphology of the as-fabricated particles was observed by FE-SEM analysis. Diffraction patterns of spherical particles were found as graphene by XRD analysis. Sphericity of GB was controlled by the variation of operating temperature, amount of glucose, and addition of $NH_4OH$. Higher sphericity of GB was prepared at higher operating temperature in the presence of $NH_4OH$. As the amount of glucose in the liquid phase reaction increased in the presence of $NH_4OH$, sphericity of GB increased. The highest sphericity of GB was 1.1. GB of higher sphericity showed lower aggregation property than that of lower sphericity. Furthermore, as-prepared GBs were found as a potential electrode material for capacitor.

• Korean Journal of Food Science and Technology
• /
• v.28 no.4
• /
• pp.696-701
• /
• 1996

For effective utilization of skipjack (Katsuwonus pelamis) cooking juice (SCJ), the SCJ was hydrolyzed with 0.5% neutrase at $50^{\circ}C$ for 1 hr, and the degree of hydrolysis was estimated to be 66.0% at this reaction condition. The hydrolysate was treated with charcoal and filtered under reduced pressure. The extract powder was prepared from the filtrate in a spray-dryer. The major free amino acids of the extract Powder were taurine (526.3 mg/100 g), glutamic acid (375.8 mg/100 g), phenylalanine (315.9 mg/100 g), and alanine (283.6 mg/100 g), and their content accounted for 55.4% of the total free amino acids (2,711.5 mg/100 g). Among the nucleotides and their related compounds, inosine was the major component with 76.29 mole/g. The content of betaine-N, total ceatinine-N, TMAO-N, and TMA-N were 72.2, 51.2, 10.3, and 6.9 mg/100 g, respectively. From the omission test, it was concluded that the major taste compounds of the extract powder were believed to be free amino acids such as glutamic acid and alanine. Organic acids and nucleotides and their related compounds acted an auxiliary role in the taste of the extract powder.

• Korean Journal of Food Science and Technology
• /
• v.31 no.4
• /
• pp.1101-1108
• /
• 1999

Soybean (SoyPep) was prepared and evaluated their action on blood lipid profiles, select biochemical indexes and histopathological changes in spontaneously hypertensive rat (SHR). Male SHRs were divided into three groups and fed the experimental diet containing 0% (control), 3%, 10% SoyPep for 8 weeks. Lipids, antioxidative vitamin levels, glutamate oxaloacetate transaminase (GOT) and glutamate pyruvate transaminase (GPT) activities in plasma were measured, and angiotensin I converting enzyme (ACE) activities in kidney, vascular tissue and plasma were also measured. In addition, histopathological changes in various organs were investigated. Dietary SoyPep was effective for lowering plasma levels of triglyceride and LDL-cholesterol. ACE activities in aorta and kidney were decreased in the group fed SoyPep compared to control. There was no difference of plasma GOT and GPT activities, and no histopathological difference in various organs among the experimental groups. Our results suggest that SoyPep has beneficial effects on diseases such as hypertension and atherosclerosis. SoyPep could be useful to develop a novel functional safe food additive for preventing the chronic diseases.