• Journal of the Korea Computer Graphics Society
• /
• v.1 no.2
• /
• pp.226-233
• /
• 1995

본 논문에서는 심장과 심장 상부의 대동맥 및 폐동맥에 대한 형태-기반 보간법을 이용한 3차원 가시화 방법을 제안하였다. CT, MR과 같은 의학 영상들은 x나 y축 방향보다 z축 방향으로 더 낮은 해상도를 갖기 때문에 3차원적 가시화를 위해서는 먼저 각 단층 영상들간의 보간이 수행되어야 한다. 그러나, 지금까지 대부분의 3차원 의학영상 가시화에서는 선형보간법이나 또는 그와 유사한 보간법들을 주로 사용했는데, 이런 보간법들은 분기나 휘어지는 구조를 갖는 기관에는 좋은 결과를 생성하지 못했었다. 따라서, 본 논문에서는 분기와 휘어짐이 있는 심장부위 구조를 3차원적으로 가시화하기 위하여 형태-기반 보간법을 이용하였다. 형태-기반 보간법을 이용한 가시화는 다른 보간법을 사용한 경우와 달리 분명하고 자연스러운 구조 표현을 할 수 있었고, 각 단층 영상간의 보간수를 증가시킴에 따라 더 좋은 결과를 생성하는 것으로 나타났다.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.39 no.2
• /
• pp.92-100
• /
• 2002

The 16-port feed waveguide array with inductive walls analyzed by Galerkin's method of moments are proposed for the DBS reception system mounted on vehicle. First of all, in order to verify the validity of electromagnetic analysis and design for a $\pi$-junction feed waveguide, it is designed and fabricated at DBS band. The measurement results of a $\pi$-junction feed waveguide agree well with the theoretical ones. Based on this design method, an array design for WR-90 standard waveguide is conducted. Since the width of a $\pi$-junction feed WR-90 standard waveguide is larger than a guided wave length in an array design, the difference of amplitude and phase of 8-port array are calculated 2.3 dB and 62 degrees, respectively. The bandwidth with return loss of -20 dB below is about 220 MHz and it doesn't satisfy DBS band. To solve this problem, we propose a novel design that the width of a $\pi$-junction feed waveguide equals to a guided wave length. By the proposed novel design for 8-port feed waveguide array, the difference of amplitude and phase are decreased 1 dB and 13 degrees, respectively. The broad bandwidth of 700 MHz is also realized. The size of 16-port waveguide away compared with WR-90 array is reduced about 10 cm. The measured antenna gain for the fabricated 16-port feed waveguide array is observed 24 dBi above at DBS band.

• Proceedings of the KSME Conference
• /
• 2001.06a
• /
• pp.734-739
• /
• 2001

In this paper, an algorithm for stacking sequence optimization which deals with discrete ply angles is used for optimization of composite laminated plates. To handle discrete ply angles, the branch and bound method is modified. Numerical results show that the optimal stacking sequence is found with fewer evaluations of objective function than expected with the size of feasible region, which shows the algorithm can be effectively used for layup optimization of composite laminates..

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.02a
• /
• pp.162-163
• /
• 2003

광 집적회로를 설계하는데 있어서 Y-형 분배기는 광에너지를 분배 혹은 결합시키는 중요한 역할을 한다. 그러나 이 소자는 분기 부분에서의 큰 손실과 공정상에서의 두 분기사이를 식각하는 것은 쉽지 않다는 단점을 갖고 있다. Y-형 분배기와 더불어 광신호의 분리와 결합에 있어서 널리 사용되는 MMI 분배기 소자는효율적인 분배 기능을 유도하기 위해서 MMI 내에 모드수가 많아져야 하는데, 이런 방식의 모드 수의 증가를 유도하기에는 MMI-길이와 폭에 제한을 받게 된다. (중략)

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.430-435
• /
• 2005

조화가진력이 작용하는 고정경계를 가진 완전원판의 비선형 진동에 대한 응답특성을 연구하였다. 원판의 비대칭모드의 고유진동수 근처에 가진주파수가 작용하는 주공진에서의 응답은 정상파(standing wave)뿐만 아니라 진행파(traveling wave)가 존재한다고 알려져 있다. 주공진 근처의 정상상태 응답곡선에서 최대한 5개의 안정한 응답이 존재하는 것으로 밝혀졌으며, 이들은 1개의 정상파와 4개의 진행파로 나타난다. 이 진행파중 2개는 Hope분기에 의해 안정성을 잃은 후 주기배가운동을 거쳐 혼돈운동에 이르게 된다. Lyaponov 지수를 사용하여 혼돈운동을 정량적으로 평가하였으며, 주평면의 개념을 이용하여 이 혼돈운동의 흡인영역이 Fractal임을 확인하였다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2015.07a
• /
• pp.366-368
• /
• 2015

광양항은 4개의 항로가 설정되어 있다. 광양항 제1항로는 광양항 항계에서 "해사안전법" 제10조에 따른 교통안전특정해역(여수구역)과 연결되어 있고, 낙포각 사포부두(원유부두 북측) 전면 해상에서 광양항 제2항로와 광양항 제3항로 및 제4항로가 분기 합류된다. 이 글은 광양항 제1항로에서 제2항로로 진입하고 있던 선박과 광양항 제3항로에서 제1항로로 진입하고 있던 선박 사이에 발생한 충돌사건의 개요와 원인을 살펴보고, 개항내 항로가 분기 합류되는 수역에서 합의항법이 적용될 수 있는 점과 현행 광양항 항로의 재배치 필요성, 여수지방해양항만청 고시로 규정하고 있는 광양항내 안전한 속력을 광양항에 입출항하는 모든 선장 및 항해사가 알 수 있도록 해도 및 "Guide to Port Entry"에 반영할 것, 그리고 VTS관제사가 광양항에 입출항하는 선박이 안전한 속력을 준수하도록 권고 또는 지시 필요성 등의 교훈 및 개선사항을 제시하고 있다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.12
• /
• pp.14-24
• /
• 2018

Several typical hyper-elastic constitutive models that encompass both conventional and advanced ones were investigated for the application of instability problems, including the biaxial tension of a rubber patch and inflation of spherical or cylindrical balloons. The material models included the neo-Hookean model, Mooney-Rivlin model, Gent model, Arruda-Boyce model, Fung model, and Pucci-Saccomandi model. Analyses can be done using membrane equations with particular strain energy density functions. Among the typical strain energy density functions, Kearsley's bifurcation for the Treloar's patch occurs only with the Mooney-Rivlin model. The inflation equation is so generalized that a spherical balloon and tube balloons can be taken into account. From the analyses, the critical material parameters and limit points were identified for material models in terms of the non-dimensional pressure and inflation volume ratio. The bifurcation was then identified and found for each material model of a balloon. When the finite element method was used for the structural instability problems of rubber-like materials, some careful treatments required could be suggested. Overall, care must be taken not only with the analysis technique, but also in selecting constitutive models, particularly the instabilities.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.3
• /
• pp.253-261
• /
• 2014

In this paper, vibration analysis of power differential gear train for 2.5MW wind turbine system is analyzed. which system is composed of two planetary gear set, one helical gear set and main shaft that connected by flange. Planetary gear set, helical gear set, main shaft are modeled in MASTA program and housing, torque arm, carrier, flange components are modeling by finite element method. Each models are combined by component mode superposition. To analysis of natural vibration characteristic about 2.5MW wind turbine gear train was performed and check about critical speed with wind load, mass unbalance, angle misalignment excitation frequency.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.12 no.3
• /
• pp.407-415
• /
• 1999

There are two kinds of instability phenomena for shell-type structures which are snap-through and bifurcation buckling. These are very sensitive according to the shape characteristics including rise-span ratio and especially shape initial imperfection. In this study, the equilibrium path of shallow sinusoidal arches supported by hinges at both ends is investigated to grasp the instability behavior of shell-type structures with initial imperfection. The Galerkin method is used to get the nonlinear discretized equation of governing differential equation considering geometric nonlinearity of arches and the perturbation method is also used to transform the nonlinear equation to incremental form.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.4
• /
• pp.1225-1232
• /
• 1996

In this paper the vibration and power flow analysis for the branched piping system conveying fluid are performed by wave approach. The uniform straight pipe element conveying fluid is formulated using the dynamic stiffness matrix by wave approach. The branched piping system conveying fluid can be easily formulated with considering of simple assumptions of displacements at the junction and continuity conditions of the pipe internal flow. The dynamic stiffness matrix for each uniform straight pipe element can be assembled by using the global assembly technique using in conventional finite element method. The computational method proposed in this paper can easily calculate the forced responses and power flow of the branched piping system conveying fluid regardless of finite element size and modal properties.