• Geophysics and Geophysical Exploration
• /
• v.4 no.1
• /
• pp.1-7
• /
• 2001

The application of geophysical survey methods need to be integrated to meet the increasing demands of imaging of the subsurface in the practical application of civil engineering, underground water survey and environmental problems. This paper examines the IP survey which can be surveyed simultaneously with DC resistivity survey. In this study, 3-D IP modeling algorithm was developed. The 3-D IP modeling algorithm was based on 3-D resistivity modeling by finite-element method. The result of 3-D modeling was compared with 2-dimensional modeling result. The result showed that the 3-D modeling algorithm developed in this study was accurate. Finally, the 3-D modeling algorithm developed in this paper will be useful for the study of IP data.

• Journal of the Korea Convergence Society
• /
• v.8 no.11
• /
• pp.307-312
• /
• 2017

In the industry, galvanizing using the principle of sacrificial anode is used Zn-Ni alloy plating was developed as one of the measures to increase the corrosion resistance rather than pure zinc plating. The alloy plating layer has a corrosion resistance of 4-5 times that of the pure zinc plating layer, so that it is applied to automotive parts requiring high corrosion resistance even though the plating cost is high. The amount of Zn-Ni alloy plating solution is a sulfuric acid bath, a chlorinated bath, an alkali bath, and an ammonia bath. Here, the influence of the electrolytic conditions on the composition of the alloy plating in the chloride bath was investigated. The results are explained by the cathode overvoltage and the diffusion coefficient. In general, as the overvoltage of the cathode increases, the concentration polarization becomes more important than the activation polarization. The concentration polarization is determined by element diffusion in the diffusion layer. That is, as the overvoltage of the cathode increases, the Zn content having a large diffusion coefficient increases.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.03a
• /
• pp.499-506
• /
• 2005

지반오염조사에 대한 유전상수 측정기법의 적용성을 평가하기 위하여 중금속 오염도에 따른 흙의 유전특성 변화를 분석하였다. 유전상수의 실수부와 허수부 모두 체적함수비에 따른 증가경향을 나타내었으며, 특히 MHz 범위에서 유전상수 실수부는 쌍극자모멘트에 비례하기 때문에 흙의 유전상수는 체적함수비에 따른 선형적인 증가경향을 나타내었다. 중금속 용액은 50kHz 이하의 저주파영역에서 전극 분극효과에 의해 농도 증가에 따라 유전상수 실수부가 증가하는 경향을 나타내었으나, 고주파 영역에서는 이온의 수화작용에 의한 물분자의 배향분극 발현 감소로 인하여 유전상수 실수부가 감소하였다. 유전상수 허수부의 경우에는 모든 주파수 영역에서 중금속 농도 증가에 따른 전도손실에 의하여 증가하는 경향을 나타내었다. 흙과 중금속 혼합시료의 경우 함수비가 큰 시료에서는 중금속 용액 자체의 유전특성이 그대로 발현되었으나, 함수비가 작은 시료에서는 공간전하분극의 영향이 우세하여 유전상수 실수부가 10-20%정도 증가하는 경향을 나타내었다. 유전상수 허수부의 경우에는 중금속 농도 증가에 따른 뚜렷한 증가경향을 확인할 수 있었다. 본 연구의 결과에 의하면 중금속의 오염감지에 대해서는 유전상수 실수부보다는 허수부의 적용성이 높은 것으로 나타났으며, 현장에서의 정확한 오염도 평가를 위해서는 함수비에 대한 평가가 선행되어야 할 것으로 판단된다.

• Journal of the Korean Vacuum Society
• /
• v.9 no.4
• /
• pp.360-366
• /
• 2000

$Sr_xBi_{2.4}Ta_2O_9$ (SBT) thin films of 150 nm thickness were prepared using LSMCD (Liquid Source Misted Chemical Deposition) process with variation of the Sr/Ta mole ratio of 0.35~0.65, and their crystalline phase, microstructure, ferroelectric properties and leakage current characteristics were investigated. Ferroelectric characteristics of the LSMCD-derived SBT films were optimized at the Sr/Ta moleratio of 0.425. The remanent polarization (2Pr) and coercive field (Ec) of the SBT film with the Sr/Ta mole ratio of 0.425 were measured as 15.01 $\mu$C/$ \textrm{cm}^2$ and 41 kV/cm at an applied voltage of $\pm$5 V respectively. LSMCD-derived SBT films with the Sr/Ta mole ratio of 0.35~0.5 exhibited leakage current densities lower than $10^{-5} A/\textrm{cm}^2$ at an applied field of 100 kV/cm, and excellent fatigue-free characteristics of the remanent polarization decrement less than 1% after $10^{10}$ switching cycles at$\pm$5 V.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.19 no.6
• /
• pp.411-419
• /
• 1999

It has been well recognized that a long term service at elevated temperature of $350^{\circ}C{\sim}550^{\circ}C$ induces embrittlement damage due to carbide precipitation and/or P, Sb and Sn segregation at grain boundaries and thereby deteriorates the grain boundary strength of heat resisting components in the energy-related plants. Therefore, it is very important to assess quantitatively the extent of embrittlement damage of heat resisting components to secure the reliable and efficient service condition and to prevent brittle failure in service. However, because fracture tests are limited in size and number of specimen obtained from the structural components, nondestructive test method is required. In this study, the optimum electrochemical parameters are investigated and discussed to evaluate nondestructive embrittlement damage for aged 2.25Cr-1Mo steels by means of electrochemical polarization test method (ECPTM) in proper corrosive environment. In addition, the electrochemical test results are compared with embrittlement degree evaluated by semi-nondestructive SP test.

• Journal of the Korean Vacuum Society
• /
• v.19 no.5
• /
• pp.347-352
• /
• 2010

To research the reduction of the dielectric constant depending on the ionic and electronic effects, the dielectric constant of SiOC film was obtained by C-V measurement using the structure of metal/SiOC film/Si, and $n^2$ calculated by the refractive index. The dielectric constant of SiOC film consists with dipole, ions and electrons. However, the dipole moment is ignored in the effect of dielectric constant in SiOC film. THe SiOC film was deposited by the plasma energy, and the gas precursor was dissociated and recombined. Therefore, the dielectric constant of the deposited film consisted of the polarity with ions. THe dielectric constant decreased after annealing process, because of the evaporation of OH hydroxyl group with polarity. The ideal SiOC film as low-k materials was annealed film with lowering the polarity, which is suitable for physical-chemical and electrical properties as an inter layer dielectric materials.

• Journal of the Institute of Convergence Signal Processing
• /
• v.6 no.4
• /
• pp.198-205
• /
• 2005

In this paper, the miniaturization of aperture-coupled RHCP patch antenna for the GPS system is treated. Circularly polarization characteristics is implemented by truncating diagonal corners of the square patch. Antenna size is reduced by inserting four uniform slits at the patch edges, which was equivalently lengthened the surface current by meandering it, This antenna uses aperture-coupled feeding structure with crossed-slot shape in order to give easy miniaturization of RHCP patch antenna. Simulated and measured results show that $42.7\%$ lower antenna size is obtained, and also $56\%$ lower -10dB bandwidth and $38.5\%$ lower 3dB AR bandwidth are obtained. when the proposed design scheme is applied to a commercial GPS antenna structure, $42.9\%$ lower patch size and $56\%$ lower 3dB AR bandwidth compared to commercial antenna at the same frequency are obtained.

• The Journal of the Acoustical Society of Korea
• /
• v.6 no.4
• /
• pp.55-63
• /
• 1987

Modified $PbTiO_3$ piezoelectric ceramics added with 0.2, 0.25, 0.3 mol of $CaCO_3$ and 0.04 mol of $(Co_{\frac{1}{2}}W_{\frac{1}{2}})$ and 0.05 mol of $MnO_2$ and NiO have been fabricated. These ceramics can be poled sufficiently within 10 minutes at $100^{\circ}C$ under about d.c. field of 40 kv/cm. Detailed measurement was performed on dielectric constants, cutie temperatures, elastic and piezoelectric properties and coupling factors for the fabricated ceramics. The most value of the piezoelectric coupling factors was coupling factor of thickness mode kt and its value for 0.25 mol of Ca was about $45\%$. Dielectric constants of $\varepsilon_{33}^T$ and $\varepsilon_{11}^T$ for 0.25 mol of Ca were 242 and 260, and coupling factor ratio (kt/Kp) and Qm were 6 and 357 respectively.

• Korean Journal of Optics and Photonics
• /
• v.17 no.3
• /
• pp.262-267
• /
• 2006

We proposed a PPLN fabrication setup that measures the voltage and current applied to $LiNbO_3$ in real time during application of a DC electric field. Because the duration for transferring a sufficient electron charge to $LiNbO_3$ increases, we are able to control the electron charge flow transferred to $LiNbO_3$ efficiently. We divided the domain inversion process of PPLN into 5 states: Nucleation (state 1), Spread of the domain inversion region under the electrode(state 2), Accumulation of the electron charge at the insulator/$LiNbO_3$ interface(state 3), Domain inversion under the insulator layer after breakdown(state 4), and Lowering the electric field applied to $LiNbO_3$ (state 5). We have found that the Threshold Point is essential for the domain inversion and that the domain inversion process must be stopped within state 3 for the optimum PPLN. Using these results, we could fabricate a stable and reproducible PPLN efficiently.

• Geophysics and Geophysical Exploration
• /
• v.17 no.4
• /
• pp.242-246
• /
• 2014

Spectral induced polarization (SIP) is a useful technique, which uses electrochemical properties, for exploration of metallic sulfide minerals. Equivalent circuit analysis is commonly conducted to calculate IP parameters from SIP data. An equivalent circuit model, which indicates the SIP response of rock, has a non-uniqueness problem. For this reason, it is very important to select the proper model for accurate analysis. Thus, this study focused on suggesting a new model, which suitable for the analysis of an anomalous SIP response, such as ore. A suitability of the new model was verified by comparing it with the existing Dias model and Cole-Cole models. Analysis errors were represented as a normalized root mean square error (NRMSE). The analysis result using the Dias model was the NRMSE of 10.50% and was the NRMSE using the Cole-Cole model of 17.03%. Howerver, because the NRMSE of the new model is 0.87%, it is considered that the new model is more useful for analyzing the anomalous SIP data than other models.