• Journal of Hydrogen and New Energy
• /
• v.24 no.2
• /
• pp.142-149
• /
• 2013

Carbon materials are mainly used as catalyst supports for polymer exchange membrane fuel cell (PEMFC). Catalyst supports are required specific characteristics of the carbon materials, such as large surface area and high electrical conductivity. Attempted were to improve electrical conductivity and to maintain high surface area of carbon materials using a microwave treatment. Microwave treatment, as a relatively new technique, takes short reaction time and reduce the consumption of the gases used for carbon treatment compared to a traditional heat treatment. Hybrid carbon (ACF/Graphene) as catalyst supports by microwave-irradiation method for PEMFC increase the cell performance because of increased electrical conductivity resulting in triple-phase contact and reduced the interfacial resistance. Scanning electron microscopy (SEM), transmission electron microscopy (TEM) and X-Ray Diffraction (XRD) were employed to analyze carbon materials. The performance of microwave-treated carbon materials was evaluated by measuring current-voltage (I-V) characteristics and electrode impedance.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.12
• /
• pp.1335-1343
• /
• 2014

Piezoelectric paint can be used to monitor vibrations or impacts occurring in large engineering structures such as ships and airplanes. This study investigated the impact detection characteristics of a piezoelectric paint sensor and possible errors in detecting impacts according to boundary conditions. The piezoelectric paint sensor used in this study was coated on an aluminum plate with four different electrode areas. After the occurrence of the poling process, the output voltages from the paint sensors were obtained when impact occurred in a certain sensor region. The experimental results revealed a large difference in magnitudes between the sensor signal in the impact region and those in the other regions, and this relation was maintained regardless of the changes in the boundary conditions.

• The Korean Journal of Pain
• /
• v.22 no.1
• /
• pp.74-77
• /
• 2009

Implantable intrathecal pump is one of the therapeutic options for intractable pain. A 24-year-old male with complex regional pain syndrome was suffering from right lower extremity pain. He had all modalities of treatment including spinal cord stimulator. However, his pain had been worse in the past 6 months. His visual analogue pain scale (VAS) was 8-10 and he could not sit or walk. Only opioid was thought to be effective. Then, intrathecal pump was considered. We estimated the minimal effective dose of spinal morphine before implantation. 0.3 mg of morphine was injected intrathecally as a starting dose. Dosage had been increased up to 0.8 mg in 10 days. His VAS score decreased from 8 to 5. He could sleep without pain and walk with crutch. Therefore, intrathecal pump was inserted. He could tolerate to pain. This case suggests that intrathecal morphine delivery can provide effective treatment for intractable non-malignant pain.

• Journal of fish pathology
• /
• v.11 no.1
• /
• pp.69-76
• /
• 1998

An apicomplexan parasite, Perkinsus sp. was observed from the cultured baby clams, Ruditapes philippinarum, collected from the coast of Kochang and Taean (South Korea), where it caused seasonal mortality of clams. Several milky-white cysts were observed on the surface of gill and visceral mass of parasitised clams. The trophozoites of parasite had eccentric nucleus and proliferated by schizogony in gill, mantle, hepatopancrease and reproductive tissues, resulting in the formation of granuloma and the intensive infiltration of hemocytes in the tissues. During incubation in FTM, trophozoites increased in size, resulting in prezoosporangia which appeared as round black spheres when colored with Lugols iodine solution. The prevalence of Perkinsus sp. in clams was Kochang, 73.1%; Taean, 94.8% (during 9-mo. survey) and showed size-dependent infection. Hemacolor kit was useful to reduce time for diagnosis of the trophozoite of Perkinsus sp. that has been responsible of massive motalities in the clam.

• Korean Journal of Materials Research
• /
• v.8 no.5
• /
• pp.444-449
• /
• 1998

There are various shielding materials that have been considered; the use of a metallic plate or the layering of a conductive material on a plastic surface and the insertion of filler in plastics. All of these methods have shown their merits and weakness. Therefore, many studies have concentrated on developing materials that effectively cut down EMI without increase in weights of housing materials. In these respects, this study has focused on investigations of the shielding effect of materials that have electroless nickel plating on the lamella structured micro particles surface with low specific gravity. When a film of electroless nickel were plated on a micro particle surfaces and then mixed with paint, the electromagnetic shielding effects were measured as 63dB. Although these effects were less than that 90dB of the copper plate, trials in a series of 6 times increased the shielding effect by IOdB and is applicable to wide range of EMI shielding.

• Korean Journal of Weed Science
• /
• v.15 no.3
• /
• pp.206-213
• /
• 1995

Glyphosate(N-[phosphonomethyl]glycine) applied to the assimilate-exporting leaves(i.e. third old leaf) of tomato(Lycopersicon esculentum Mil var. Moneymaker). Herbicide binding protein, QB protein(D1), has been immunoblotted using the antibodies raised against the hybrid-protein expressed by a part of spinach psb A gene cloned in frame with the 3'end of lac Z gene to allow expression of the ${\beta}$-galactosidase(EC 3.21.23) in Escherichia coli. Glyphosate has an effect on a turnover of D1 within photosystem II of thylakoid membrane. The dysfunction of D1 protein within light harvesting complex(LHC-II) seems to be a pleiotropic effect of glyphosate.

• Membrane Journal
• /
• v.26 no.3
• /
• pp.212-219
• /
• 2016

The alumina hollow fiber membranes were prepared by spinning and sintering a polymer solution containing suspended alumina powders. For determine pore structure of hollow fiber membranes formed by different solvent-nonsolvent interaction rate, dimethylsulfoxide (DMSO), dimethylacetamide (DMAc), triethylphosphite (TEP) were prepared in dope solution by solvent, polyethersulfone (PESf) and polyvinylpyrrolidone (PVP) were used as a polymer binder and additive. The pore structure of hollow fiber membranes was characterized using scanning electron microscope (SEM). The alumina hollow fiber membranes prepared by DMSO, DMAc were had the asymmetric structure mixed sponge-like and finger-like morphology, while TEP solvent were had single sponge-like structure. The prepared hollow fiber membranes were analyzed gas permeation and mechanical strength experiment also. The hollow fiber membrane having single sponge-like structure was had high gas permeation performance. On the contrary to this, more finger-like morphology was less gas permeation performance.

• Journal of Digital Convergence
• /
• v.14 no.12
• /
• pp.471-476
• /
• 2016

Recently, important information related with smart work such as office and video conference are handled in smart device quite a lot compare with before. Also, execution environment of smart devices is getting developed as open software environment. It brought convenience to download and use any kind of application software. By that, security side of smart devices became vulnerable. This paper will discuss characteristics of smart device security technology based on virtualization that is a mobile device platform with isolated secure execution area based on TEE (Trusted Execution Environment). Also, this paper will suggest an implementation method about safe smart device security platform based on domain separation for application software which can be executed in smart devices. The domain separation based smart device security platform technology in this paper blocks unauthorized access and leakage of sensitive information in device. Also it will be the solution can block transmission and execution of malicious code in various area including variety of IoT devices in internet rather than just smart devices.

• Journal of Hydrogen and New Energy
• /
• v.25 no.1
• /
• pp.1-10
• /
• 2014

Ceria ($CeO_2$) was used to scavenge free radicals which attack the membrane in the polymer electrolyte membrane water electrolysis (PEMWE) circumstance and to increase the duration of the membrane. In order to improve the electrochemical, mechanical and electrocatalytic characteristics, engineering plastic of the sulfonated polyether ether ketone (SPEEK) as polymer matrix was prepared in the sulfonation reaction of polyether ether ketone (PEEK) and the organic-inorganic blended composite membranes were prepared by sol-gel casting method with loading the highly dispersed ceria and cesium-substituted phophomolybdic acid(Cs-MoPA) with cross-linking agent contents of 0.01mL. In conclusion, CL-SPEEK/$Cs_{(2.5)}$-MoPA/ceria(1%) membrane showed the optimum results such as 0.1095S/cm of proton conductivity at $80^{\circ}C$, 2.906meq./g-dry-membrane of ion exchange capacity and mechanical characteristics, and 49.73MPa of tensile strength which were better than Nafion 117 membrane.

• Journal of Digital Convergence
• /
• v.14 no.7
• /
• pp.73-81
• /
• 2016

This study examined the effects of followership characteristics on LMX, knowledge sharing, job satisfaction and turnover intention for coffee speciality store members. 317 questionnaire samples are used to test 4 hypotheses using structural equation model with AMOS. Results of hypotheses testing are as follows: First, goal congruence and active participation factors of followership characteristics influence positively LMX. Second, LMX influences positively knowledge sharing, and knowledge influences job satisfaction and turnover intention. This study emphasizes the importance of knowledge sharing in coffee speciality store members relations. In addition, this study shows that followership, LMX, knowledge sharing are important for members' increasing job satisfaction and decreasing turnover intention, and human resource management. Implications and limitations of this study were also suggested.