• Composites Research
• /
• v.29 no.2
• /
• pp.73-78
• /
• 2016

In this paper, The concept of a wheel with carbon fiber composite is to replace the conventional material used for a wheel hub, such as plastic, with a disk-type hub made of carbon fabric and epoxy resin. The impact load from the ground under real conditions was considered; a low-velocity impact test was conducted to evaluate the impact performance of the carbon wheel and compare it with that of a conventional plastic wheel. This study applied a 70 J impact load as a test condition. The impact energy was controlled in the test by adjustment of height and weight of impactor. The use of a carbon disk wheel hub was confirmed to reduce weight and generate an excellent repulsive force at low energy under conditions similar to real driving conditions. The results showed that the maximum load increased proportionally depending on the impact load, but the growth of the maximum load was reduced at a 20 J impact load and tended to decrease at a 45 J impact load. The carbon wheel showed excellent properties ; the level of rebounding was 35.3% and 19.1% of the total impact energy at impact loads of 5 J and 10 J, respectively. On the other hand, the carbon disk wheel rebounded less than 5% of the total energy due to crack generation of the thin carbon hub for impact loads of more than 20 J.

• Composites Research
• /
• v.16 no.4
• /
• pp.22-28
• /
• 2003

This article deals with the manufacture and test results of asbestos-free friction material for Aluminium at toy disk. In order to obtain optimum formulation, various formulations of fibres, matrix, modifiers, fillers, etc were designed and evaluated. The constant friction and brake dynamometer tests were performed to know weak and strong point for each friction material. The C21 formulation of various tested formulations exhibited superior friction constant(0.38∼38), fade rate (18%) by JASO C406 test mode and maximum wear 1.6 mm. disc wear 0.08 mm by JASO C427 test mode. The surface morphology of AL alloy disk(before and after test) was observed by Scanning Electron Microscope(SEM) and Image Analyzer.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.11a
• /
• pp.747-748
• /
• 2010

• Journal of Auto-vehicle Safety Association
• /
• v.11 no.1
• /
• pp.23-29
• /
• 2019

Recently, use of composite materials has been increasing for body structures and chassis parts in the car industry because of weight reduction effect and excellent mechanical thermal characteristics. However, application of composite materials in brake system is very difficult because it is hard to obtain enough brake performance due to low heat storage capacity of the composite materials. In this paper, we will present new carbon ceramic composite disc with high flow characteristic. To obtain this characteristic, new vent structures were designed by using ARIZ method and substance-field model analysis. The flow effect of these vent structures on the brake performance was verified by pugh matrix and cooling test. The test results show improvement of cooling performance up to $30^{\circ}C$. Finally, These results will improve brake the reliability of the brake performance for the high performance vehicles and electric vehicles.

• Journal of Auto-vehicle Safety Association
• /
• v.13 no.3
• /
• pp.32-40
• /
• 2021

Composite material is very attractive because it has excellent mechanical property and is possible to lightweight due to the low density. However, composite material is less used compared to other systems in the chassis system because it is very hard to solve NVH problem when composite material is applied to vehicle. Especially, reducing squeal noise of composite brake system is essential to apply it to vehicle successfully. In this paper, we present a new solution to reduce squeal noise of composite brake system. To achieve this goal, we analyze main causes of noise using RCA (Root Cause Analysis), CA (Contradiction Analysis) and sequentially get IFR (Ideal Final Result) to solve the problem. Next, we define the function of composite brake system and derive control factors and noise factors. A variety of tests for factors like chamfer, slot, damping shim, underlayer of brake pad are done. In addition, we analyze level of contribution for control factors theoretically. Finally, we get the effective solution for reducing squeal noise.

• Composites Research
• /
• v.15 no.2
• /
• pp.24-31
• /
• 2002

In this paper, the safety of the crack existing between the load bearing part and the friction part in key slots was evaluated. The repetitive loading test considered impact damage was performed for the various crack models. Also, the probability of the crack propagation and the stress concentration at the crack tip were studied by using a FE analysis. By these method, safety of the disk was confirmed.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.1
• /
• pp.21-30
• /
• 2017

The surface temperature of disc brakes varies during braking, which can affect the friction and wear behavior of braking systems. In order to develop an efficient braking system, the friction and wear behaviors of brake materials need to be clearly understood. In this work, the friction and wear behavior of the C/C-SiC-Cu composite and the Al/SiC composite, which are used in disc braking systems, were investigated. Both the surface temperature and contact pressure were studied. A pin-on-reciprocating tribotester was used for this purpose, in order to control temperature and load. Results showed that the friction varied significantly with temperature and sliding distance. It was found that a transfer layer of compacted wear debris formed on the wear track of the two materials. These layers caused the surface roughness of the wear track to increase. The outcome of this work is expected to serve as a basis for the development of braking systems under various operating conditions.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.3 no.2
• /
• pp.56-65
• /
• 1999

The relationship of the winding process variables and the mechanical properties of filament wound composites is investigated experimentally. The winding process variables considered are the fiber tensions and the fiber ends. The filament wound ring specimens are fabricated using 3-axis controlled filament winding machine. Two types of carbon fibers, TZ-507 and IZ-40, are used as reinforcements and epoxy for filament winding is used as resin. During the winding process, the fiber tensions are varied from 0.5kgf to 3.0kgf, and the number of the fiber ends are varied from 1 to 6. The fiber volume fractions and the void contents for the ring specimens are measured through the resin digestion. The mechanical properties of the ring specimens are also evaluated by the split disk test. The test results show that the winding process variables affect the fiber volume fractions and the void contents of the ring specimens, which result in the variation of the tensile properties of the ring specimens. Therefore, suitable winding process variables should be applied to maximize the structural performance and the productivity for filament wound structures.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.971-974
• /
• 2011

Aluminum matrix composites reinforced with SiC particles(AMC) are one of the candidate materials for the weight reduction of rolling stock brake discs. It is known that weight reduction of about 40% is possible when they replace conventional cast iron brake discs. But casting is not easy because of bad wettability of SiC with Al alloy. We developed two AMC brake discs with SiC volume fraction of 20% by a new casting method. It was found the developed method produced brake discs of good quality.

• Journal of Auto-vehicle Safety Association
• /
• v.12 no.1
• /
• pp.26-32
• /
• 2020

The luxury car market has been steadily growing for the last 10 years and it might keep expanding in the future. Furthermore, it is expected to be a very competitive market because luxury cars are considred to reflect the technology level of motor companies. For this reason, it is very important for motor companies to improve performances of luxury vehicles. However, it takes years for the companies to increase the technology level for the high performances. In this paper, we aim to analyze the technologies for high quality brake perfomances through investigation of two luxury vehicle models and develop a new high performance brake system. First, we found out a variety of effective factors for the high performances. Second, we conducted the brake performance analysis to figure out the relationship between brake effort and brake feeling. Finally, we develped the new brake system using carbon ceramic composite materials to satisfy the high quality brake performances.