• The Korean Journal of Rheology
• /
• v.9 no.3
• /
• pp.103-110
• /
• 1997

고분자 복합재료 제조방법의 하나인 수지이동성형의 충전공정을 모사하기 위한 수 치모사 코드를 개발하였다. 수지이동성형의 충정공정문제를 수학적 공식으로 표현하기 위하 여 비등방성 다공질체를 통과하는 유동에 대한 이론을 사용하였다. 과도상태로 진행하는 자 유표면의 동적 충전거동을 묘사하기 위하여 수치격자 생성을 포괄하는 경계적합 좌표계의 계산기법을 적용하였다. 이와 아울러 불규칙적인 구저와 다중으로 연결된 금형면의 충전모 사에 저합한 복합격자의 개념을 도입하였다. 복합격자들 간의 가상의 경계에 대해서는 검사 체적 기법을 이용하여 물질보존을 만족시켜 주었다. 임의의 금형 두께와 투과도를 가지는 다수의 금형면이 결합된 두 개의 입구를 지닌 금형을 대상으로 하여 몇가지 예를 시험해 보 았다. 수치모사의결과 복합격자의 개념을 도입한 수치모사 코드는 수지이동성형의 복잡한 충전공정을 보다 정교하게 모사하는데 응용될수 있음을 보여주었다.

• Composites Research
• /
• v.17 no.4
• /
• pp.32-39
• /
• 2004

Among many fiber optic sensors, FBG sensors are being studied more actively than any other sensor due to good multiplexing capabilities. Recently, the application fields of FBG sensors are mainly focused on the composite materials through embedding rather than attaching on the surface. However, there are many limitations on the embedding FBG sensors into composite materials because of the birefringence effects which is induced when FBG sensors are not embedded parallel to the reinforcing fiber. In this study, the fabrication method of FBG sensors with various grating length that are easy to fabricate with good multiplexing capabilities and more stable from the birefringence effects are investigated. The signal characteristics of the FBG sensors are also verified through the cure monitoring of 2 kinds of composite materials.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.835-837
• /
• 2017

In this paper, manufacturing processes of cylindrical composite lattice structures using filament winding method was described. Cylindrical composite lattice structures were manufactured in accordance with four major steps. Silicon mold of lattice shape was installed on mandrel and then continuous fiber was wound on silicon mold. After winding process, in order to ensure the same thickness for all regions, compression process was done for its intersection parts. Finally, the composite lattice structure was demoulded after curing in oven. It was found that the manufactured cylindrical composites lattice structure had 2.4% of dimensional error compared to the design requirements.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.25 no.6
• /
• pp.74-86
• /
• 2021

The composite lattice structure is a structure that supports the required load with the minimum weight and thickness. Composite lattice structure is manufactured by the filament winding process using impregnating high-strength carbon fiber with an epoxy resin. Filament winding process can laminate and manufacture only structurally necessary parts, composite lattice structure can be applied to aircraft fuselages, satellite and launch vehicles, and guided weapons to maximize weight reduction. In this paper, the development and evaluation of the composite lattice structure corresponding to the entire process from design, analysis, fabrication, and evaluation of large-scale cylindrical and conical composites lattice structure were performed. To be applicable to actual projectiles and guided weapons, we developed a cylindrical lattice structure with a diameter of 2,600 mm and a length of 2,000 mm, and a conical lattice structure with an upper diameter of 1,300 mm, a lower diameter of 2,500 mm, and a length of 900 mm. The performance of the developed composite lattice structure was evaluated through a load test.

• Journal of Ocean Engineering and Technology
• /
• v.11 no.2
• /
• pp.70-76
• /
• 1997

수치격자의 크기제한에 의한 자유표면 유동해석 문제를 효율적으로 다루기 위하여 자유표면의 모든 격자를 x 방향으로 4,8,12개로 등분할 하고, y 방향으로는 4개로 잘라서 계산하였다. 이중격자 또는 삼중격자로 Navier-Stokes 방정식의 각항에 크기가 다른 격자를 사용해 효율을 향상시키는 계산방법의 연장으로, 본 논문에서는 자유표면 방정식에 보다 세분화된 격자를 적용해, Marker Particle 이동 및 자유수면 형성에 효율향상을 줄수 있는 수치방법을 도입하였다. 계산결과에 의하면 초기사용 격자가 coarse한 경우가 본방법의 효과가 커짐을 알 수 있고 대상물로는 층류유동에서 Wigley모형과 낭류유동의 S103 모형이다.

• Composites Research
• /
• v.30 no.6
• /
• pp.356-364
• /
• 2017

Composite lattice structures are tried to be used in various fields because of its benefit in physical properties. With increase of demand of the composite lattice structure, nondestructive testing technology is also required to certificate the quality of the manufactured structures. Recently, research on the development of the composite lattice structure in Republic of Korea was started and accordingly, fast and accurate non-destructive evaluation technology was needed to finalize the manufacturing process. This paper studied non-destructive testing methods for composite lattice structure using laser ultrasonic propagation imaging systems. Pulse-echo ultrasonic propagation imaging system was able to inspect a rib structure wrapped with a skin structure. To reduce the time of inspection, a band divider, which can get signal in different frequency bands at once, was developed. Its performance was proved in an aluminum sandwich panel. In addition, to increase a quality of results, curvature compensating algorithm was developed. On the other hand, guided wave ultrasonic propagation imaging system was applied to inspect delamination in a rib structure. To increase an area of inspection, multi-source ultrasonic wave propagation image was applied, and defects were successfully highlighted with variable time window amplitude mapping algorithm. These imply that ultrasonic propagation imaging systems provides fast and accurate non-destructive testing results for composite lattice structure in a stage of the manufacturing process.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.249-253
• /
• 2008

최근 국내에서 사용되고 있는 격자분포형 강우-유출 모형 $Vflo^{TM}$을 실무에 효율적으로 적용하기 위하여 매개변수값의 결정과 그 민감도를 분석하고, 중랑천 유역의 토지이용 및 지형특성을 고려한 적정 크기의 격자에 대한 연구를 수행하였다. 연구대상유역으로는 토지이용현황이 상이한 중랑천 상류(자연유역), 우이천(복합유역) 및 청계천(도시유역) 유역을 선택하였다. $2003{\sim}2006$년까지 5개 호우사상의 실측자료로부터 매개변수값의 최적화를 실시하였으며 수치모의된 결과로 부터 조도계수, 투수계수, 초기함수비 등의 매개변수에 의한 계산치의 민감도를 분석하였다. 검토결과 지표면 조도계수가 가장 예민했으며, Green-Ampt식에 적용되는 투수계수의 영향이 큰 것으로 분석되었다. 또한, 수문학적 지형특성 반영을 위한 적정 격자크기는 자연유역(중랑천 상류)과 복합유역(우이천)에서는 100과 200 m에서 관측 유출수문곡선과 대체로 일치하나, 격자크기가 300 m에서는 지형특성을 반영하지 못해 유출수문곡선이 왜곡되는 경향을 나타내어 불투수율 80% 이하인 자연 및 복합유역에서는 DEM 격자크기를 $200{\sim}300\;m$이하로 적용하는 것이 적정하다고 판단된다.

• Composites Research
• /
• v.30 no.6
• /
• pp.338-342
• /
• 2017

In this paper, evaluation method of structural integrity of cylindrical composite lattice structures was conducted. A finite element analysis was used to evaluate the structural integrity of composite lattice structures. In order to verify the optimal finite element in the evaluation of the structural integrity, finite element models for cylindrical composite lattice structure were generated using beam, shell and solid elements. The results of the finite element analyses with the shell and solid element models showed a good agreement. However, considerable differences were found between the beam element model and the shell and solid models. This occurred because the beam element does not take into account the degradation of the mechanical properties of the non-intersection parts of cylindrical composite lattice structures. It was found that the finite element analysis of evaluation of structural integrity for cylindrical composite lattice structures have to use solid element.

• Composites Research
• /
• v.31 no.4
• /
• pp.156-160
• /
• 2018

In this paper, evaluation method of structural integrity for cone-type composite lattice structures with hexagonal cell was conducted. A finite element analysis was used to evaluate the structural integrity of cone-type composite lattice structure. The finite element model for evaluation of structural integrity was generated using solid element. In order to consider the difference in mechanical properties between intersection and non-intersection part, the mechanical properties were applied considering the fiber volume fraction of each part. Compression test of cone-type composite lattice structure were conducted for verification of evaluation method of structural integrity. The analysis result showed 2% errors in displacement and good agreement with test result.

• Composites Research
• /
• v.30 no.6
• /
• pp.331-337
• /
• 2017

The composite lattice structures have advantages of high specific stiffness and strength and are mainly applied to the structures of launch vehicles that carry the compressive load. However, since these structures are manufactured by filament winding technology, there are some defects and voids found in the knots. For these reasons, the stiffness and strength of the lattice structures have to be compared with finite element model for predicting design load. But, the full scale test is difficult because time and space are limited and the shape of structure is complex, and hence the simple and reliable test methods for examination of stiffness are needed. In this paper, subelements of composite lattice structures were prepared and compressive and bending test were conducted for examination of stiffness of helical and hoop rib. Test methods for subelements of composite lattice structures that has curved and twisted shape were supposed and compared with finite element analysis results.