• Journal of Conservation Science
• /
• v.27 no.1
• /
• pp.49-59
• /
• 2011

The damaged ceramics were repaired and restored thru various methods with various materials. The history of Ceramic repair and restoration has developed widening its areas from traditional stage utilizing applicable living material to the specified field that introduces new materials, new process methods and material analysis. Through investigations over the documents, artifacts and analysis, the period could be divided into natural material period in which uses the bonds extracted from the animals, plants and lime (prehistoric to Japanese domination period), Semi-artificial period in which mix natural material and synthetic resins such as "Jusabi"(Japanese domination period to 1970s.) and complete synthetic resin period in which introduces new materials and process methods in accordance with preservation standard (after 1980s).

• Journal of Conservation Science
• /
• v.19
• /
• pp.31-42
• /
• 2006

There are many materials used in restoring missing parts of pottery and ceramics and they are used according to the each quality of materials. In our research we tried to find the new repair materials to solve many problems exposed in the existing repair materials. As a result, we made new repair materials that we properly put oven bake clays into repair epoxy putty which is being used as oven bake clays for a long time. Fortunately, through testing yellowing, vickers hardness, coloring and heating temperature, We could get an idea that new repair materials would be the best materials in the efficiency of restoration, yellowing, and coloring.

• Journal of the Korea Convergence Society
• /
• v.11 no.11
• /
• pp.165-173
• /
• 2020

ABS and PLA are applied for restoring missing part of damaged ceramics, but are not similar to the material of ceramics, so this study conducted a research on the properties and applicability of ceramic resin. This study conducted actual restoration of ABS and ceramic resin as well as cast restoration method with experiment of properties. Results show that manufacturing of restored part showed higher precision than existing materials, which enables printing of tiny shapes showing excellent surface texture and gloss than L30 and ABS resin. As a result of measuring properties, the material showed excellent durability than existing materials with no contraction and deformation and compressive strength, but value of specific gravity and hardness can lower processability after manufacturing. Long-term monitoring, evaluation of reliability of ceramic resin applied in this study, additional researches on the restorability of the original shape when printing too thin or long restored part are needed.

• Composites Research
• /
• v.28 no.4
• /
• pp.204-211
• /
• 2015

This paper presents a theory related to a two-dimensional linear cross-sectional analysis, recovery relationship and a one-dimensional nonlinear beam analysis for composite wing structure with initial twist. Using VABS including a related theory, the design process of the composite rotor blade has been described. Cross-sectional analysis was performed at cutting point including all the details of geometry and material. Stiffness matrix and mass matrix were linked to each section to make 1D beam model. The 3D strain distributions within the structure were recovered based on the global behavior of the 1D beam analysis and visualize numerical results.

• The korean journal of orthodontics
• /
• v.40 no.1
• /
• pp.16-26
• /
• 2010

Objective: The purposes of this study were to evaluate the force and stress depending on the type, deflection and thickness of the materials and to evaluate the mechanical properties of thermoplastic materials after repeated loading. Methods: Four types of thermoplastic products were tested. Force until the deflections of 2.0 mm and the stress when the materials were restoring to its resting position were evaluated. The mechanical properties of thermoplastic materials evaluated after 5 repeated loading cycles. Results: The interaction was observed between the thickness and the deflection (p < 0.05) from the regression equation. Thickness and amount of deflection rather than products and materials showed the largest effect on force and stress. In all products, at least 159 gf of force was required for more than 1.0 mm deflection or when materials with 1.0 mm thickness were deflected. The stress recorded was more than 19 gf/$mm^2$. During repeated loading, each group showed significant difference on the force and the stress (p < 0.01), 10 - 17% reduction of force and 4 - 7% reduction of stress in average. Conclusions: Proper thickness of thermoplastic materials and deflection level of tooth movement should be decided for the physiologic tooth movement. Force decay after repeated loading should be considered for the efficient tooth movement.

• Conservation Science in Museum
• /
• v.29
• /
• pp.81-98
• /
• 2023

This study was conducted to examine the effect of the light source for the media facade of the 10-story Gyeongcheonsa Stone Pagoda on the pagoda's restoration materials. To restore the pagoda, two types of epoxy resin-L-30, Araldite (AW106, and HV953U)-were used, and the photostability of the restoration materials and the acceptable lighting irradiation time were estimated through accelerated aging experiments of the restoration specimens. Six types of specimens were used in this process: a specimen painted with blue and yellow pigments for each resin type, and an unpainted specimen. Among them, the ΔE of the unpainted specimens (BA) of Araldite AW106 and HV953U was the highest of 4.66, and the acceptable light irradiation time was about 130,000 hours if the change rate of ΔE is limited to about 1. It was confirmed that the BA specimens were losing their characteristics due to light, as their reflectance and transmittance increased and the absorbance decreased, making them more transparent than their original color. It was found that the painted specimens had a low change rate of ΔE, with insignificant changes in their reflectance, transmittance and absorbance. Therefore, the use of pigments with high photostability provides more restoration materials options.

• Water for future
• /
• v.33 no.6
• /
• pp.15-28
• /
• 2000

하천복원(河川復元, stream restoration)이란 이·치수 위주의 하천 정비나 불량한 유역 관리에 의해 훼손된 하천의 생태 서식처를 되살리기 위해 하천 변을 원래의 자연 상태에 가깝게 되돌리는 것이다. 본 하천복원 특집은 사적인 연구 동호회인 ＇하천복원 연구회＇의 회원 중 하천 기술자와 생물 전문가들에 의해 꾸며졌다. 이 특집에서는 하천 복원의 개론 성격으로 하천 복원의 이해와 국내외 사례 등을 먼저 소개하고, 다음 하천 복원의 주요 대상인 하천 식생과 물고기의 서식처 특성에 대해 소개한다. 마지막으로 하천 복원의 주요 도구인 자연형 하천공법에 대해 호안 재료와 환경변화를 중심으로 소개한다. 하천 복원은 선진 외국의 경우 하천 수리학과 생태학 등에서 이미 보편화되고 있는 분야이다. 우리도 자연 생태 복원에 대한 사회의 욕구가 점차 높아지고 있으므로 이에 관련된 지식과 기술의 이해와 관심이 요구된다.

• Journal of Conservation Science
• /
• v.30 no.1
• /
• pp.103-109
• /
• 2014

This study aimed to develop materials to compensate for problems of restoration for lost parts and material problems in the conservation treatment. First, there are several problems with existing materials as follows: secondary damage due to the high shrinkage rate and low adhesive strength, sense of difference due to the severe yellowing, remelting due to irreversibility of materials, processability due to the high strength, sag due to the prolonged setting time in the work process and surface contamination of artifacts due to tools or gloves. In order to solve these problems, this study set developmental goals after understanding the types and physical properties based on epoxy resin among the currently used restoration materials of pottery and earthenware. The developed epoxy resin is epoxy putty, which is cured within 5 minutes, for earthenware restoration. In the earthenware restoration method, the epoxy putty enhanced the workability by quickly curing in paste form and compensated disadvantages such as surface contamination. In addition, the use of white micro-balloon for the epoxy stock solution made coloring easier and weight lighter, and a restoration material with low shrinkage and superior processability was developed.

• Journal of Conservation Science
• /
• v.26 no.2
• /
• pp.183-190
• /
• 2010

We fabricated urethane material based on properties of reversible and unfading for antic-ceramics restoration. This material with low viscosity was made hardness control possible that user want. And it have very strong adhesion and shear strength properties and is shown the best properties for pigment filling, anti-contractibility, coloring as like epoxy system materials. Particularly, the yellowing and ir-reversibility problem in epoxy restoration material were finally solved. So, there is guarantee in the eternity and stabilization of restoration for antic-celamics. And in order to show the reversible state of the restoration, we successfully dissolve this urethane materials in solvent after perfect restoring subsequently.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2004.05b
• /
• pp.1395-1399
• /
• 2004

절개지사면에 구조물이 설치될 경우 배수압소산과 식생복원을 위해서는 기본적으로 다공성이 뛰어나고 식생의 서식이 가능한 구조물로 설계되어야 하며, 동시에 사면의 안정을 제공해주는 기능을 할 수 있어야 한다. 구조물이 설치될 지역에 Mattress/Filter를 사용할 경우 배수압의 소산과 식생의 활착이 가능한 구조물로 사면의 안정과 식생복원효과를 검토하였다. 본 연구에서는 절개지사면에 토목구조물이 설치될 경우 식생의 복원과 구조물의 안정성을 높이기 위한 기법으로 Mattress/Filter에 Slag를 채워서 다공성을 부여함으로써 사면의 배수압소산과 식생촉진 뿐만 아니라 사면의 안정성을 제공해줄 수 있는 구조이다. 특히, Mattress/Filter는 다공성이 뛰어나 자연배수가 가능한 구조물로서 그 구변 생태계에 필수적인 물의 상호교류 즉, 투수와 배수가 가능하고 배수압의 소산이 가능하여 식생복원과 사면안정에 우수한 것으로 나타났다. Mattress옹벽은 배면의 지하수 배제를 촉진시켜 사면의 안정화에 기여하게 되려, 식생의 복원에 뛰어난 효과가 있는 것으로 나타났다. 또한 Mattress에서 Fitter의 채움 재료로 산업계기물(Slag) 및 건설폐기물(폐콘크리트, 사석) 등을 재활용할 수 있으므로 Mattress는 채움재료의 비용이 저렴하고 유지관리가 용이하며, 생태계의 보존에도 Mattress/Filter의 사용은 매우 효과적임을 알 수 있었다.