• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.9
• /
• pp.138-144
• /
• 2012

In this paper, we introduce the time-domain equalizer in orthogonal frequency division multiplexing (OFDM) systems using orthogonal matching pursuit (OMP) algorithm. Since OFDM system inserts guard intervals, it shows robust performance against multi-path fading. However, in Doppler channel, inter-carrier interference (ICI) occurs because an orthogonality of sub-carriers does not maintain. A least squares (LS) algorithm is common method of time-domain equalizer, but if a channel length is longer, the performance deteriorates by noise. The multi-path fading is a summation of the different delay signal. And that has sparse properties in time-domain. Because the OMP algorithm of the compressive sensing (CS) algorithm restores the channel by choosing the important elements of sparse channel, it can reduce the influence of noise. We simulate the performance of time-domain equalizer in OFDM system with various channel environments using OMP algorithm compared with other equalization method.

• Spatial Information Research
• /
• v.9 no.1
• /
• pp.1-13
• /
• 2001

Nowadays, SAR Interferometry is actively being studied as a new technique in topographic mapping using satellite imagery. It extracts height values using phase information derived by two SAR imageries covering same areas. Unlike when using SPOT imagery, it is not affected by atmospheric conditions and time. So to speak, we can say that SAR Interferometry is flexible in imagery acquisitions and can get height data economically over wide area. So, it is expected that SAR Interferometry will be widely using in GIS applications. But, in some area occurring geometric distortion, height data are misjudged or not extracted depending on phase unwrapping algorithms. IN the case of ERS tandem data, the accuracy of height data was worst in mountain area. It is the because of the short incidence angle resulted in layover effect. Of the phase unwrapping algorithms, path-following was better in height accuracy but could not get data in layover area. In this area, we could get height data using Height Sensitivity. In concludion, we could get DEM that maintained the accuracy of path-following method and have overall data across imagery.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.7
• /
• pp.1577-1582
• /
• 2013

In this paper, we have analyzed the performance of MIMO (Multi-Input Multi-Output) underwater acoustic communication by using the acquired data via the experiments in water tank. First of all, in the pursuit of this aim, we have measured the channel transfer characteristics at several transceiver locations. The transmitted signal was modulated by QPSK(Quadrature Phase Shit Keying) and the received signal was recovered through the detector that contains the zero forcing equalizer. A maximum 30~40 ms delay was appeared because of physically closed water tank environment that has the harsh multi-path transmission conditions. In result of experiment, even though the bit error rate showed comparatively large when $2{\times}2$ MIMO system with two transmitters and receivers was considered. However, we confirmed it has approximately 15% enhanced performance compared with SISO (Single-Input Single-Output) system.

• The KIPS Transactions:PartD
• /
• v.13D no.3 s.106
• /
• pp.317-324
• /
• 2006

In this paper, we propose a new indexing technique to solve various queries which have a strong good point not only database indexing schema take advantage of converting from semi-structured data to structured data but also performance is more faster than before. We represent structure information of XML document between nodes of tree that additional numbering information which can be bit-stream without modified structure of XML tree. And, We add in indexing schema searching incidental structure information in the process. In Querying schema, we recover ancestor nodes through give information of node using indexing schema in complete path query expression as well as relative path query expression. Therefore, it takes advantage of making derivative query expression with given query. In this process, we recognize that indexing and querying schema can get searched result set faster and more accurate. Because response time is become shorter by bit operating, when query occur and it just needs information of record set earch node in database.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.11
• /
• pp.2113-2119
• /
• 2006

In this paper, we design the r-Sensor protocol for reliable data transmission in the Intelligent Home Service based on the wireless sensor network environment. The r-Sensor protocol improve the reliability of data transmission and node fairness using simple routing algorithm, congestion control, and loss recovery method that minimize the load of relay node. Reposed routing algorithm find out upstream and downstream nodes using the Network Management packet. Meanwhile, loss recovery algorithm uses the Aggregated-Nack. To apply supposed algorithm, the IHS-AMR(Intelligent Home Service - Automatic Meter Reader) and sensor node are designed and implemented in hardware. The IHS-AMR provides remote metering service and also offers home safety service by internetworking with sensor network, mobile phone network and internet.

• Journal of Soil and Groundwater Environment
• /
• v.12 no.1
• /
• pp.73-86
• /
• 2007

Risk-based remediation strategy (RBRS) is a consistent decision-making process for the assessment and response to chemical release based on protecting human health and the environment. The decision-making process described integrates exposure and risk assessment practices with site assessment activities and remedial action selection to ensure that the chosen actions are protective of human health and the environment. The general sequences of events in Tier 1 is as follows: initial site assessment, development of conceptual site model with all exposure pathways, data collection on pollutants and receptors, and identification of risk-based screening level (RBSL). If site conditions do not meet RBSL, it needs further site-specific tier evaluation, Tier 2. In most cases, only limited number of exposure pathways, exposure scenarios, and chemicals of concern are considered the Tier 2 evaluation since many are eliminated from consideration during the Tier 1 evaluation. In spite of uncertainties due to the conservatism applied to risk calculations, limitation in site-specific data collections, and variables affecting the selection of target risk levels and exposure factors, RBRS provides us time- and cost-effectiveness of the remedial action. To ensure reliance of the results, the development team should consider land and resource use, cumulative risks, and additive effects. In addition, it is necessary to develop appropriate site assessment guideline and reliable toxicity assessment method, and to study on site-specific parameters and exposure parameters in Korea.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.27 no.3
• /
• pp.63-74
• /
• 2019

This study carried out a human risk assessment of Cu, Pb, Zn and Ni contained in soil contaminated by improperly buried heavy metal wastes in railway sites. The purpose of the human risk assessment is to derive the need for soil remediation and factors that should be considered during soil remediation. Risk assessment was performed in accordance with the Environment Ministry's Risk Assessment Guidelines. The results of the human risk assessment of contaminated heavy metal soil contaminated by improperly buried waste in the railway site were presented after the process of determining exposure concentration, calculating exposure, and determining carcinogenic hazards. The heavy metal content of soil is 621.3 Cu mg/kg, 2,824.5 Pb mg/kg, 1,559.1 Zn mg/kg and 45 Ni mg/kg, which is the exposure concentration of the target contaminant. The results of human exposure according to exposure pathways were high in the order of soil outdoor dust >soil ingestion >soil contact, and Pb >Zn >Cu >Ni were higher in order of contaminant. The carcinogenic and noncarcinogenic risks of soil contaminated with heavy metal waste were higher than the allowable carcinogenic risks (TCR> $10^{-6}$) and the risk index (Hi < 1.0) suggested by USEPA. Therefore, the site needs to be remediated.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.2C
• /
• pp.131-142
• /
• 2002

It is Proposed thatthe Algorithm for Self healing to restoration the backup VP Occurrence Error in ATM Network. This study focuses on self-healing algorithm to restore failed VP. and backup-VP algorithm, one of the popular self-healing algorithm, is applied in this study. The problem with the existing algorithm is that when backup-VP is failed, there is no solution. This study proposes backup-VP algorithm to guarantee QoS in accordance with class. This study evaluates the effect of failure and proposes two algorithms. One is a disjointed path group to node pair class, and the other is one that applied different backup-VP case by case. Through simulation network restoring ability is compared, analyzed and synthesized.

• The Journal of the Acoustical Society of Korea
• /
• v.13 no.1
• /
• pp.63-70
• /
• 1994

In this paper, we Investigate the $Q^2PSK$ modulation and demodulation system and analyze the BER performance of the receiver system under 2-way Rayleigh fading and Gaussian noisy channel environment. The TDL equalizer with the adaptive LMS algorithm is used to improve the receiver performance since the received signal is distorted through that channel and the recovered carrier from the noncoherent demodulation has much phase deviation error. From the results of computer simulation, It is shown that at 12dB SNR, the reception performance is improved by $83.7\%$ in the fading case, $89.3\%$ in the carrier phase error case and $60.4\%$ in the case of the fading and carrier phase error.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.10C
• /
• pp.980-986
• /
• 2002

In the fast data communication system, synchronized by a clock source, the loss of data will often occur due to several reasons as a differential routing path between data and clock, a differential propagation delay of components or an unstable phase of clock and data by external noise. In this paper, we describe the ASIC implementation of the data compensation circuit which can detect the data loss from above problems and recovery to original data with stable synchronization. Especially it supports a strong stability and a good BER in the communication system for fast data transfer as optic area. This circuit is implemented by Verilog HDL and available to the digital ASIC implementations related to fast data transfer.