• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.6
• /
• pp.512-519
• /
• 2016

Auxiliary Power Unit of FA-50 which provides energy other than propulsion is an important element to maintain airworthiness on aircraft. Also Inlet Guide Vane of Auxiliary Power Unit is a device that supplies appropriate airflow into the Auxiliary Power Unit after adjusting influent airflow into the load compressor. This report, based on the problems occurred the driving gears of Inlet Guide Vane, deals with cause of occurrence, troubleshooting, design improvement and result of test flight verification for FA-50 aircraft Auxiliary Power Unit lifespan.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.194-197
• /
• 2017

Aircraft engine and auxiliary power units are certified in processes of design, production according to airworthiness requirements. The aircraft engines shall demonstrate compliance with the design and production through the Type Certificate and the auxiliary power unit shall demonstrate compliance with the design and production through the Technical Standards Order Approval. MOLIT(Ministry of Land, Infrastructure and Transport) established the law and the airworthiness requirements for aircraft engines such as KAS Part 33 but didn't issue the Technical Standards Order for auxiliary power unit. In this paper, we proposed and explained the plan for improvement of our aircraft engines industry through building and expanding the certification infra-structure for aircraft engines and auxiliary power unit.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.2
• /
• pp.143-150
• /
• 2023

As Korea's per capita income increases, participation in various leisure activities to improve the quality of life of the disabled is encouraged. However, in order to participate in leisure activities, movement to the place where the leisure activities are performed must be preceded, so interest in means of transportation for leisure activities of the disabled is increasing. Since manual and electric wheelchairs have their respective disadvantages as means of transportation for leisure activities, interest in power assisting devices for wheelchairs combining the functions of electric wheelchairs with manual wheelchairs is increasing. In this study, the FDA approval process of wheelchair power-assistance products was investigated, and the characteristics of side-attached, front-attached, downward-attached, and rear-attached types of power assist devices for wheelchairs wheelchair in countries around the world were identified. These information will be of great use in helping the disabled and their assistants in Korea to choose the optimal product according to the patient's condition. More usability tests and clinical case studies are needed so that people with disabilities can choose a power assist device suitable for them.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.198-200
• /
• 2017

An Auxiliary Power Unit (APU) is a small gas turbine engine that is mounted on an aircraft and serves to supply energy for ground and air starting of the main engine. APU also supplies emergency and auxiliary power for the aircraft. APU for aircraft is simple and compact in structure, but because it is mounted on manned aircraft, high reliability is required, so it must be proved its reliability through qualification procedure. The Korea Aerospace Research Institute and Hanwha Techwin successfully completed the design / analysis, fabrication, assembly, development test and certification test of APU for helicopter based on accumulated domestic R & D capability and experience from 2007 to 2012. In this paper, the development and certification process of auxiliary power unit for helicopter is summarized.

• Proceedings of the KIEE Conference
• /
• 2001.07d
• /
• pp.2033-2035
• /
• 2001

본 연구는 기존의 자전거에 전기 구동장치를 장착시켜서 자전거의 페달링에 의하여 검출된 답력을 이용한 보조 동력 구동장치에 대한 개발이다. 답력의 검출은 불시의치차를 이용한 동력 전달장치를 이용하였다. 이 장치의 입력기어에서 출력기어로 동력을 전달하는 아이들 피니언 기어와 결합된 캐리어를 동력 전달시 발생하는 반력에 의한 각도를 이용하여 토크량을 측정하였다. 동력전달을 할 경우 발생하는 반력에 의한 회전각을 자기센서를 이용하여 답력을 측정하였다. 이 답력을 구동회로에 인가하여 보조동력을 자전거에 인가함에 따라 주행을 쾌적하게 하도록 개발하였으며 실험을 통하여 실용성을 고찰하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.3
• /
• pp.640-646
• /
• 2017

A GEN TEST of the auxiliary power unit of a T-50 series aircraft is performed as part of the operational test of its emergency power system on the ground before flight. At this time, the auxiliary power unit should be automatically turned off via the response signal of the ECU when power is not normally supplied to the emergency power system. If the correct operation of the emergency power system cannot be confirmed on the ground, it is not possible to proceed with the flight. This kind of defect is a major factor causing the operation rate of the aircraft to be decreased. The defect code identified by the ECU was confirmed as a defect in the inverter. However, the same defect was found after replacing the inverter. This report presents an improved method of identifying the cause of the defect by analyzing the response characteristics of the ECU and emergency power system and allows the ECU to be recognized as the cause of the defect if the inverter does not generate a voltage within a certain time. Also, the application of the improved method confirmed that it can satisfy the output request time of the emergency power system and effectively prevent the auto-shutdown of the auxiliary power unit.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.908-911
• /
• 2011

Aircraft Auxiliary Power Unit can start and operate using not only main fuel(JP-8) but also specified emergency fuels for emergency operation. In oder to verify emergency fuel requirement, emergency fuel test using commercial diesel fuel was performed. Changes in specific fuel consumption due to use of diesel fuel are 3.5%~7.8%, which satisfied requirement. Diesel fuel showed similar starting characteristic to the JP-8. The specific fuel consumption of diesel increased by 2.0%~3.4% compared with that of JP-8.

• Aerospace Engineering and Technology
• /
• v.11 no.2
• /
• pp.57-64
• /
• 2012

Although the APU combustors were developed successfully, it could face many unexpected hardships in an engine or a system operating under the severe environments. But, it is not easy to change the combustion field or combustor structure at the engine/system development stage. So we must suggest practical ways to optimize the value quantitatively by engine test and flow analysis, and verify those by the cyclic test. This paper describes reverse-annular type combustor troubleshooting processes for verifying and settling of the problems and issues occurred in various engine and system operation tests by experiment and analysis.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.2
• /
• pp.525-531
• /
• 2023

In Korea, which is entering a super-aged society, the number of elderly patients who have difficulty walking independently is expected to increase rapidly, and it is necessary to develop wheelchair products with various functions to improve the quality of life of people with walking disabilities. Recently, wheelchair power assist devices that provide propulsion power by being attached to a manual wheelchair has been developed and is entering the domestic and global markets. In this study, we compared and analyzed the process of obtaining medical device certification for wheelchair power assist devices in Korea, the United States, and Europe. In Korea, a Class 2 medical device certification process was developed in 2021, and in the US FDA, it corresponds to Class 2 like the existing electric wheelchair and must pass the 510k certification process. In the case of Europe, it is uniquely regulated as Class I, and the CE mark can be attached through a relatively easy self-declaration of conformity. The Korean medical device industry, which is struggling with MDR certification, a new European medical device regulation, should pay attention to the relatively easy entry into the global market for wheelchair power assist products.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.9 no.1
• /
• pp.1-9
• /
• 2015

This paper reviews trends of the rehabilitation welfare devices on the basis of products and markets. Latest assistive devices tend to have a fold function. Auxiliary power assist module has been added. The completion of products has been improved. The folding function has strong relationship with portability. Specifically, various mobility devices, including foldable devices, are associated with enhanced portability. Powered auxiliary wheels and upper extremity supporting modules have entered the market. The leading-edge technology like Segway's control technology applies to two-wheel wheelchairs. The brand- new technology, lower extremity robotic exoskeleton, applies to markets. Standing wheelchairs, ramps, stair climbing assistive devices becomes more common. In addition, a combination of a variety of smart devices is being promoted to the classical assistive devices' part. Rehabilitation welfare devices can be more valuable due to nice industrial design, improved materials, and processing technology.