• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.2
• /
• pp.437-446
• /
• 2014

In this study, the ultimate strengths of 13 slab-column joints and 51 torsional beams were evaluated to verify the validity of the strut-tie model approach presented in the companion paper. In addition, the design of the bridge pier subjected to multiple load combinations with longitudinal and lateral loads was conducted. The analysis results were compared with those by the provisions of BS 8110, ACI 318, and AASHTO-LRFD. The design results of the bridge pier were also compared with those by the provisions of ACI 318's sectional design method and AASHTO-LRFD's strut-tie model method.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.13 no.1
• /
• pp.1-11
• /
• 2000

In this paper, optimum design problem of R.C. continuous beam is considered and GUI system is developed for using at the practical design. Objective function lot formulation of optimum design problem is made up of the costs of concrete, reinforcing steel and formwork. Design variables are width, effective depth of the beam and steel ratio and design constraints are considered on the strength, serviceability, durability and geometrical conditions. The optimum design problem is solved by using sequential linear programming(SLP), sequential convex programming(SCP) and compared their effectiveness. Also this paper shows the application at practical design work according to the development of GUI system using visual basic.

• Journal of Korean Society of Transportation
• /
• v.25 no.2 s.95
• /
• pp.83-93
• /
• 2007

Pedestrians and vehicle users should be treated with equal importance in urban street design. However, current street design suggests that the design criteria for sidewalks is based on the functional hierarchy of the vehicles, therefore it is necessary to develop sidewalk design standards that give more weight to pedestrians rather than vehicles. For this, this study suggests that the level of service of pedestrians should be considered in the process of designing sidewalks. Currently, level of service (LOS) criteria for pedestrians in the Korean Highway Capacity Manual are based on pedestrian volume, but the volume of pedestrians is seldomly estimated in practice. So, the current LOS criteria has limitations in terms of practical use. Also, the study assumes that the pedestrian flow rate is hardly the dominant factor that could affect the LOS of pedestrians at most urban sidewalks. In this context, the study considers a new LOS for sidewalk design based on the comfort of pedestrians while passing pedestrians coming from the opposite direction. Then the study attempts to link the new LOS criteria to the land use patterns using data of pedestrian traffic characteristics acquired from the field. In addition to this, the scope in which the suggested criteria can be applied is suggested.

• Journal of the Korea Concrete Institute
• /
• v.17 no.5 s.89
• /
• pp.717-726
• /
• 2005

Shear test data have been extracted from previous experimental research and compiled into a database that may be the largest ever made. In this paper, the shear database (SDB) was used for evaluating shear design provisions for both reinforced concrete (RC) beams and prestressd concrete (PSC) beams. A discussion on the use of the results of this evaluation related to calibration and strength reduction factor for the shear design provisions was also provided. It was observed that the shear design provisions did not provide good predictions for RC members and gave very poor predictions especially for RC members without shear reinforcement. On the other hand, the limit on shear strength contributed by transverse reinforcement was observed to be lower than necessary. The shear design provisions gave very unconservative results for the large RC members (d>700mm) without shear reinforcement having light amount of longitudinal reinforcement $(\rho_w<1.0\%)$. However, for PSC members the shear design provisions gave a good estimation of ultimate shear strength with a reasonable margin of safety. Despite of a large difference of accuracy in prediction of shear strength for RC members and PSC members, the shear design provisions used a same shear strength reduction factor for these members. As a result, the shear design provisions did not provide a uniform factor of safety against shear failure for different types of members.

• Journal of Korean Society of Steel Construction
• /
• v.23 no.4
• /
• pp.405-415
• /
• 2011

For the safe seismic design of buildings, it is necessary to predict the plastic deformation demands of the members as well as the story drift ratio. In the present study, a simple method of estimating the beam plastic rotation was developed for special-moment-resisting steel frame structures designed with strong column-weak beam behavior. The proposed method uses elastic analysis rather than nonlinear analysis, which is difficult to use in practice. The beam plastic rotation was directly calculated based on the results of the elastic analysis, addressing the moment redistribution, the column and joint dimensions, the movement of the plastic hinge, the panel zone deformation, the gravity load, and the strain-hardening behavior. In addition, the rocking effect of the braced frame or core wall on the beam plastic rotation was addressed. For verification, the proposed method was applied to a six-story special-moment frame designed with strong column-weak beam behavior. The predicted plastic rotations of the beams were compared with those that were determined via nonlinear analysis. The beam plastic rotations that were predicted using the proposed method correlated well with those that were determined from the nonlinear pushover analysis.

• Computational Structural Engineering
• /
• v.10 no.4
• /
• pp.349-358
• /
• 1997

The present paper describes an investigation into the application of the genetic algorithm (GA) in the optimum design of composite laminated structure. Stochastic processes generate an initial population of designs and then apply principles of natural selection/survival of the fittest to improve the designs. The five test functions are used to verify the robustness and reliability of the GA, and as a numerical example, minimum weight of a cantilever composite laminated beam with a mix of continuous, integer and discrete design variables is obtained by using the GA with exterior penalty function method. The design problem has constraints on strength, displacements, and natural frequencies, and is formulated to a multidimensional nonlinear form. From the results, it is found that the GA search technique is very effective to find the good optimum solution as well as has higher robustness.

• Proceedings of the KAIS Fall Conference
• /
• 2007.11a
• /
• pp.382-385
• /
• 2007

본 연구에서는 기존 연구를 토대로 하여 비탄성 구간에 있는 계단식 I형보의 횡-비틀림 좌굴강도를 범용구조해석 프로그램 ABAQUS(2006)를 이용하여 산정하고, 간편한 설계식을 제안하고 있다. 본 연구 결과는 다양한 형식의 I형보가 사용되는 빌딩 및 교량의 경제적이고 합리적인 설계의 근간을 제공해 줄 것이며, 향후 다양한 하중 조건을 가지는 양단 또는 일단 계단식 단면 변화보의 비탄성 횡-비틀림 좌굴강도를 계산할 수 있는 설계식 개발에 적극 활용 될 수 있을 것이다.

• Journal of Korean Society of Steel Construction
• /
• v.22 no.6
• /
• pp.581-588
• /
• 2010

Recently the requirements of the buildings built with structural steel were increased in terms of structural stabilities and fire resistance at severe fire conditions. To meet the building regulations of fire resistance, a fire design is needed. This is of a prescriptive method and a performance engineering based method. Recently a simple calculation method as one of performance based engineering method is very popular because of its ease for an application in building built with structural steel. But, in Korea the performance based engineering method is not allowed yet. Thus it is needed to make a guideline for the performance based engineering method. The purpose of this study is to establish the limit temperature derived from structural beams made with both a H-section and a H-section filled with concrete at the web and derived the limit temperatures from beams made with H-sections and found out that the limit temperatures from two kinds of specimens depended on the applied loads and the specimens filled with the concrete represented 3 hour fire resistance in the range of 80%, 60%, and 50% of the maximum load.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.27 no.4
• /
• pp.305-312
• /
• 2014

The current American Concrete Institute(ACI), Canadian Standard Associate(CSA) and CEB-FIP Model Code 2010 provisions on the shear strength of a simply supported deep beam suggest that deep beams should be designed using the strut-and-tie model. Although this is a useful methodology to design members in disturbed regions, the quality of the design is highly dependent on the truss model that designers create. However, Hong et al. derived the shear strength equations of reinforced concrete deep beams. This thesis investigates the validity of the current ACI, CSA and CEB-FIP code provisions on the shear strength of simply supported reinforced concrete deep beams by comparing them with the shear strength equations proposed by Hong et al. The comparison shows that all of these code provisions provide reasonable estimates on the shear strength of concrete deep beam members and the selection of an internal truss model plays an important role on the estimation of shear strength.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.4B
• /
• pp.353-360
• /
• 2011

The objectives of this study were to analyzes temporal variation of local scour depth in the downstream of weir with shapes. Prediction of maximum or equilibrium scour depth was the main focus of engineers and researchers in the downstream of weir. However, it is necessary to analyzes temporal variation of local scour depth in the downstream of weir to predict real time scour depth. Experiment were performed with various weir shapes like sharp crest and inclined stepped with time variation and non-dimensional scourhole shapes, scour depths were proposed. A formula for predicting scour depths with temporal variation for weir were proposed through non-linear regression analysis. Temporal variation of scour depths could be estimated with suggested formula and 4 input data (Equilibrium scour depth, weir height, overflow depths, and water depth downstream). Suggested formula could make it possible to design a apron and bed protection economically in the downstream of a weir by considering flood duration time.