• Journal of Aerospace System Engineering
• /
• v.15 no.5
• /
• pp.8-15
• /
• 2021

This paper describes a design method using an optimization technique to satisfy the longitudinal handling quality of high maneuverable jet aircraft. The dynamic inversion technique was applied to the target aircraft, and the control gain optimization satisfied the longitudinal short-period handling quality, however, the stability margin was not considered. If the stability margin is not satisfied, it is necessary to directly readjust the gains through trial and error methods for improvement. To improve this, an additional compensator and an optimization constraint were added to the control gain optimization procedure. In addition, the degree of handling quality satisfaction with the optimization result was reevaluated, and additional control evaluation criteria for the convergence of the time response and the steady state error that the flight performance requirement set as the optimization constraint cannot be reflected, and the results are described.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.7
• /
• pp.1231-1237
• /
• 2022

In the present study, the optimization of the main particulars of a ship using AI-based design search techniques was investigated. For the design search techniques, the SHERPA algorithm by HEEDS was applied, and CFD analysis using STAR-CCM+ was applied for the calculation of resistance performance. Main particulars were automatically transformed by modifying the main particulars of the ship at the stage of preprocessing using JAVA script and Python. Small catamaran was chosen for the present study, and the main dimensions of the length, breadth, draft of demi-hull, and distance between demi-hulls were considered as design variables. Total resistance was considered as an objective function, and the range of displaced volume considering the arrangement of the outfitting system was chosen as the constraint. As a result, the changes in the individual design variables were within ±5%, and the total resistance of the optimized hull form was decreased by 11% compared with that of the existing hull form. Throughout the present study, the resistance performance of small catamaran could be improved by the optimization of the main dimensions without direct modification of the hull shape. In addition, the application of optimization using design search techniques is expected for the improvement in the resistance performance of a ship.

• Journal of the Korea Society of Computer and Information
• /
• v.11 no.4 s.42
• /
• pp.87-96
• /
• 2006

Although bytecode has many good features, it has slow execution speed and it is not an ideal representation for program analysis or optimization. For analysises and optimizations. bytecode must be translated to a Static Single Assignment Form(SSA Form) But when bytecode is translated a SSA Form it has lost type informations of son variables. For resolving these problem in this paper, we create extended control flow graph on bytecode. Also we convert the control flow graph to SSA Form for static analysis. Calculation about many informations such as dominator, immediate dominator. dominance frontier. ${\phi}$-Function. renaming are required to convert to SSA Form. To obtain appropriate type for generated SSA Form, we proceed the followings. First. we construct call graph and derivation graph of classes. And the we collect information associated with each node. After finding equivalence nodes and constructing Strongly Connected Component based on the collected informations. we assign type to each node.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.41 no.5
• /
• pp.117-124
• /
• 2004

Various multimedia systems have been developed and their application areas widely proliferate. Thus, the interoperability is getting important among various networks and devices. The video transcoding is a technology to solve this interoperability problem among various coding standards. Transcoding can be defined as the conversion of one compressed coded data to another. In this paper, MPEG-2 to MPEG-4 transcoder in the spatial domain is compared with that in the DCT domain. The transcoder is very useful when a video sequence that is originally encoded for digital TV, DVD or satellite broadcasting is served in mobile environment. In order to compare two transcoders, all modules except motion compensation and down sampling are implemented identically. In addition, both transcoders do not search for motion vector. Instead, the decoded information is reused to the encoder. The experimental results show that the transcoder in the spatial domain is usually better than that in the DCT domain with respect to PSNR (Peak Signal-to-Noise Ratio), bitrate and execution time.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.05a
• /
• pp.374-377
• /
• 2008

비정질 Si박막 태양전지의 후면 반사층을 위한 ZnO:Al TCO박막을 RF Magnetron Sputtering 방법으로 증착하였으며 이의 전기적, 광학적 특성 및 구조를 최적화하였다. Sputtering의 공정변수인 증착 RF 파워, 기판온도, 타겟-기판 거리, 증착압력을 변화시켜 ZnO:Al 단일막의 전기적, 광학적 특성을 최적화 하였고,이를 소면적 태양전지 셀 및 모듈에 적용하였다.그 중 증착 RF파워 및 압력이 단일막의 전기적,광학적 특성에 타겟-기판거리는 박막의 균일도에 큰 영향을 주었다. 압력에 따른 박막의 치밀도를 SE EMA방법으로 정량화하였고, 광학적, 전기적 특성과 연관하여 해석하였다. ZnO:Al 박막의 물성을 최적화하여 태양전지 셀에 적용한 결과 두께 80nm에서 가장 큰 Jsc의 증가를 보였고, 적용 전에 비해 약 18%의 광변환효율의 증가를 얻었다. 최적화된 태양전지 셀의 광변환효율은 9.9%, 모듈 효율은 7.4%였다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.5
• /
• pp.46-55
• /
• 2006

In general, 3-dimensional point-mass equation has been widely used for the trajectory optimization of the fixed-wing aircraft and reentry vehicle. But it should be modified and represent target vehicle's own characteristics. For a lighter-than-air vehicle such as an airship, there exists different and peculiar flight characteristics compared with the aircraft. The first part of this paper is to derive the dynamic equation of motion for the mid-altitude unmanned airship and the second part is to obtain the optimal trajectories under the minimal time flight given constraints. The trajectory optimization problem is converted into the nonlinear programming problem using Sequential Quadratic Programming approach. Finally numerical solutions are presented in the last part of the paper.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.3
• /
• pp.72-78
• /
• 1990

In this paper, the physical meanings of LDD optimization are treated by numerical simulation and related experiments are attempted to analyzed the optimized LDD structure. Firstly, according to the numerical analysis, the electric field under the n-region near drain is low and uniformly distributed and the current flow is widely distributed in this region under the optimized conditions. It is also found that this optimized point should be achieved by globally optimizing all the process and electrical conditions. Secondly, the maximum electric field, which is obtained from the substrate current to the drain current ratio, is minimized under the optimized condition according to the experiment. Further, the device lifetime is maximized and the n-resistance is changed smoothly from the channel resistance to the $n^+$junction resistance.

• Korean Journal of Optics and Photonics
• /
• v.27 no.6
• /
• pp.203-211
• /
• 2016

We have studied the hybrid method for reconstructing apodized chirped fiber Bragg gratings, using both an analytic estimation of grating parameters and an optimization algorithm. The Hilbert transform of the reflection spectrum was utilized to estimate grating parameters, and then the layer-peeling algorithm was used to obtain refined parameter values by the differential-evolution optimization process. Calculations for a fiber Bragg grating with wavelength chirp rate 2 nm/cm were obtained with an accuracy of $6{\times}10^{-5}nm/cm$ for the chirp rate and $3{\times}10^{-9}nm/cm$ for the index modulation, with much improved calculation speed and high reliability.

• The KIPS Transactions:PartA
• /
• v.11A no.5
• /
• pp.391-400
• /
• 2004

Within multimodal medical image registration techniques, which correlate different images and Provide integrated information, surface registration methods generally minimize the surface distance between two modalities. However, the features of two modalities acquired from one subject are similar. So, it can improve the accuracy of registration result to match two images based on optimization of both surface distance and shape feature. This research proposes a registration method which optimizes surface distance and surface curvature of two brain modalities. The registration process has two steps. First, surface information is extracted from the reference images and the test images. Next, the optimization process is performed. In the former step, the surface boundaries of regions of interest are extracted from the two modalities. And for the boundary of reference volume image, distance map and curvature map are generated. In the optimization step, a transformation minimizing both surface distance and surface curvature difference is determined by a cost function referring to the distance map and curvature map. The applying of the result transformation makes test volume be registered to reference volume. The suggested cost function makes possible a more robust and accurate registration result than that of the cost function using the surface distance only. Also, this research provides an efficient means for image analysis through volume visualization of the registration result.

• Journal of Internet Computing and Services
• /
• v.7 no.2
• /
• pp.37-52
• /
• 2006

A mobile device like ceil phone is the necessity of modern people, of ich con be easily connected to a wireless internet through such a mobile device. The demand for a wireless data communication is growing rapidly. However, agencies have not yet completed standardization of a markup language. Due to the development of the Mobile Device, agencies in this field have provided different data formats with each Mobile Device Platform. Traditionally, contents is hand-tailored to suit the target device. A key problem is that the characteristics and capabilities of the mobile device are too diverse to service the most suitable mobile contents. Because of these problems, the need for a re-usable document description language increases. In this paper, we defined Template file that is common data to service mobile devices. We proposed a method that could be an effective wireless web service though design and the implementation of the Call manager & the XSL Generator. In the methodology, when requesting a wireless internet service, a mobile device finds out markup language and a hardware specification of the mobile device through the Call Manager component supports. The XSL Generator component creates the XSL file dynamically that is the most suitable to a device. Finally, contents is serviced to each device by XSLT. It can generate a wireless page more easily by reusing the existing web contents through such course. Therefore, it can save the time and expense for generating a wireless page.