• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.13 no.5
• /
• pp.49-56
• /
• 2003

In this paper, we propose an efficient blind watermarking algorithm using wavelet transform. The proposed algorithm inserts watermark into the high frequency subbands that were transformed by 1-level wavelet transform of original image. Watermark insertion is achieved by exchanging each of the corresponding coefficients in the HL, LH, and HH, subbands according to the inserted watermark value. And watermark is extracted by the relation of wavelet coefficients without original image. Experimental results demonstrate that watermarked image has a good quality in terms of imperceptibility and is robust against various attacks.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.13 no.2
• /
• pp.153-162
• /
• 1995

The coordinate transformation both WGS84 and Bessel ellipsoids is essential to use of GPS in South Korea. Especially, for transformation considered the needed accuracy and the regional characteristics, the study about geoid modeling and the characteristics on the transformed area should be done. The aim of this study define the characteristics of the transformed coordinates according to transformation methods and the area measured by GPS. For this, large network that include South Korea, four regional network consist of large network, and local net-work include Incheon city designed. Geoid model based on Bessel suitable to South Korea selected from study about the effects of the assumed geoid height at the geodetic origin, and then coefficients computed according as transformed area and methods. Also, the transformed characteristics of the large coefficients, the regional coefficients, and the local coefficients according to methods compared, analyzed synthetically.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.16 no.2
• /
• pp.149-158
• /
• 1998

The aim of this paper is to propose the technique of the two dimensional geodetic coordinates conversion between WGS84 and Bessel spheroids by the two-dimensional affine transformation modeling based on the UTM plane coordinates without the local geoid model which is essential to three dimensional coordinates conversion. Area of approximately $25\times{11}$ square km in the city of Inchon was selected as the test area. The transformation parameters were determined using the eleven triangulation control points in test area. And then, those paraneters were applied to the fifteen cadastral control points which selected as checking points for precision checking of transformation parameters. The average and standard deviations of the absolute values of the conversion residuals of checking points in latitude/longitude and N/E(UTM) and/or x/y(TM) are $\pm0.006"$$\pm0.013"$ and $\pm{17cm/}\pm{30cm}$ respectively. Also, coefficients for 7-parameters, 3-parameters and UTM model transformation computed according as sizes of transformed area, and then the transformed characteristics of checking points according to transformation methods analyzed synthetically.hetically.

• Journal of Korea Multimedia Society
• /
• v.1 no.2
• /
• pp.194-203
• /
• 1998

In this paper, a new DCT-VQ method is proposed which can solve the problems of VQ such as the degradation of edge and enormous calculations. VQ is carried in DCT domain but spatial domain in order to protect the degradation of edge. DCT makes high correlated image data decorrelated and the energy concentrated on a few coefficients. In DCT domain, the DC coefficient is quantized with 8 bits uniform scalar quantizer and the AC coefficients are divided to three regions and coded with vector qiantizer for considering edge components. For the decrease of the calculation and memory, the vectors for three region have small dimension of $1{\times}7$ and use the same codebook. Thus, the proposed method can fully express the edge components by considering AC coefficients in DCT domain and decrease the calculation and memory be reducing the dimension of vectors.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.10
• /
• pp.1469-1482
• /
• 1993

A new image coding technique has been proposed based on the wavelet transform. To achieve lower ceding rates and good qualities in reconstructed images, some of wavelet coefficients were removed by thresholding and quantized in accordance with the sensitivity of the human visual system(HVS). For each block of subimages in wavelet transform domain, block thresholding scheme has been used to remove the unimportant wavelet coefficients according to the frequency characteristic and statistical property of wavelet coefficients. The location information of quantized blocks and removed blocks were encoded using run-length coder which is effective for the exponential distribution. Quantized coefficients were encoded using variable length coder which matches well to their distribution. Simulation results show that the reconstructed images maintain high quality with the low bit rate, below 1.0 bits per pel.

• Journal of Advanced Navigation Technology
• /
• v.14 no.3
• /
• pp.446-451
• /
• 2010

This paper addressed an another scheme of distortion estimation method based on simplified inverse quantization in H.264/AVC. The distortion is calculated by the difference of coefficient between quantized transform coefficients and that of inverse. In general, these process included such transforms as discrete cosine transform(DCT), quantization, inverse quantization(IQ), and Inverse DCT(IDCT). In proposed approach, IQ as well as IDCT process are skipped because of replacing a couple of approximated formulas. Some simulation have been conducted and it showed that the PSNR was almost the same, and reduced the rate-distortion optimization(RDO) mode decision time of 8~15% in comparison with conventional method.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.42 no.6
• /
• pp.45-55
• /
• 2000

Seasonal water requirements by paddy rice is important to water budgeting for the water resources planning at a basin scale. This paper compares the water requirements resulting from different approaches for the Han River Basin. The demands from the drought years of 1967 and 1968 were found to be significantly less than the irrigation standards. This may result in significant underestimation of the basin-wide water demands. A conversion factor method is proposed to define seasonal irrigation demands. The factor is defined from the ratios of the standards for each growing stage to the drought year demands. The results were compared satisfactorily with those from the irrigation standards, and readily applicable to the water resources planning.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.388-391
• /
• 2011

강우침식인자를 구하기 위해서는 개별 호우사상의 30분 최대 강우강도를 산정해야 한다. 이를 위해서는 연속된 분단위 강우자료가 필요하지만, 자료 획득이 제한되어 지점별로 보다 얻기 쉬운 시간 단위 강우량을 이용하여 30분 최대 강우강도를 추정하려는 노력이 있어왔다. 본 연구는 시강우량을 이용하여 개별 호우사상의 30분 최대 강우강도를 추정하기 위한 것으로서 대구 지점의 1960년~1999년 기간의 818개 호우사상을 이용하였다. 분류된 호우사상별 30분 최대 강우강도를 기상청으로부터 획득한 분단위 강우자료를 이용하여 산출한 뒤, 이를 참값으로 하여 60분 최대 강우강도와의 상관관계를 분석하였다. 그 결과 대구 지점의 60분 최대 강우강도로부터 30분 최대 강우강도를 추정할 수 있는 변환계수는 1.228로 나타났으며, 고정시간 1시간 최대 강우강도로부터 30분 최대 강우강도를 추정할 수 있는 변환계수는 1.3778로 나타났다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.450.1-450.1
• /
• 2014

열에너지를 전기에너지로 변환하거나 또는 전기에너지를 열에너지로 직접 변환하는 열전 변환 기술이 주목받고 있다. 열전 변환 효율은 성능지수($ZT={\alpha}^2{\sigma}T{\kappa}^{-1}$)로 평가되며, 여기서 ${\alpha}$, ${\sigma}$, ${\kappa}$, T는 각각 열전재료의 제벡계수, 전기전도도, 열전도도 및 절대온도이다. 따라서 우수한 열전재료는 높은 제벡계수와 전기전도도 그리고 낮은 열전도도를 가져야 한다. Bismuth telluride는 상온영역에서 성능지수가 높은 재료로서, $Bi_2Te_3$에 $Bi_2Se_3$와 고용체를 형성하면 원자의 치환으로 포논산란에 의해 열전도도가 낮아지고, 도핑으로 전기적 특성을 조절하여 성능지수를 향상시킬 수 있다. 본 연구에서는 진공밀폐 용해법으로 $Bi_2Te_{2.85}Se_{0.15}:I_m$ (m=0.0~0.045) 고용체를 합성하여 상분석을 실시하고, 전자 이동특성 및 열전 특성을 평가하였다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2001.04b
• /
• pp.899-902
• /
• 2001

본 논문은 도로 상에서 움직이는 물체를 검출하고 웨이블릿 변환을 이용하여 검출된 물체를 추적하는 방법을 제안한다. 제안한 방법은 후보 영역 추출 단계와 물체 판별 단계 그리고 추적 단계로 이루어진다. 첫번째 단계에서는 연속된 두 프레임간의 차영상 분석 방법을 기반하여 움직이는 물체에 의해 발생한 영역과 그 이외의 다른 영역들을 검출한다. 두 번째 단계에서는 검출된 영역에 포함되어 있는 물체를 웨이블릿 변환 계수를 입력하는 신경망을 사용하여 판별한다. 그리고 판별된 물체의 위치 및 크기 정보와 웨이블릿 변환 계수를 이용하여 추적한다. 제안한 방법을 실험한 결과, 물체 추적률은 93%, 프레임당 처리 시간은 0.19ms 이다. 본 논문에서 제안한 방법은 실시간 교통 감시 시스템에 유용하게 적용될 수 있다.