• Journal of Chest Surgery
• /
• v.33 no.11
• /
• pp.881-885
• /
• 2000

배경: 승모판막 질환에 동반된 심방세동의 경우 그 기간이 길면 승모판막 질환을 수술하여도 동성 율동으로 전환될 가능성이 매우 적다. 본 연구는 승모판막 질환에 동반된 심방세동에 대한 변형 Maze 수술후 장기 결과와 심방세도의 재발에 미치는 요인을 조사 하고자 하였다. 대상 및 방법: 1990년부터 1996년까지 승모판막 질환과 동반된 심방세동으로 외과적 요법을 시행받은 35명의 환자를 대상으로 하였다. 심방세동의 평균 유병기간은 평균 7.7$\pm$4.5년이었고 수술은 승모판막 대치술 34례(재수술 3례)와 승모판막 성형술 1례를 시행하였고 승모판 질환 수술 외에 동반 수술로는 삼첨판륜 성형술 4례, 삼첨판막 대치술 3례 였다. 심 방세동에 대한 수술은 좌측 폐정맥 부위는 격리하지 않는 변형 Maze 수술을 시행하였다. 수술 후 동성 율동으로 회복여부, 심방세동의 재발에 미치는 요인과 장기 결과를 분석하였다. 결과: 수술 직후 2례를 제외한 33례(93.9%)에서 동성율동으로 돌아왔으나 수술 후 퇴원 전에 12례에서 심방세동이 재발되었다. 수술환자중 1례에서 수술 후 3일에 동성 정지에 따른 심정지가 발생하여 소생되었으나 뇌손상으로 수술 후 15일에 사망하였다. 심방세동이 재발된 경우 수술 후 약 2개월에서 6개월 사이에 항부정맥 약물(mquinidine)과 전기적 제세동으로 치료하여 12례중 10례에서 동성 율동으로 돌아온 환자는 항부정맥 약물을 모두 중단하 였으며, 수술 후 3년에서 9년(평균 71.1$\pm$17.5개월) 추적 관찰 중 9례에서 심방세동이 재발되어 장기간 동성 율동이 유지된 환자는 34명중 25명으로 73.5%이었다. 승모판 질환이 있던 환자에서 수술 후 심방세동의 재발에 미치는 요인들을 조사한 결과 수술전 심방세동의 기간(동성율동 유지군 : 재발군=6.3년 : 10.3년, P=0.008)과 수술 전 단순 흉부 X선상 심흉비율(0.58 : 0.72, p=0.009)은 통계학적으로 유의하게 나타났으나 심초음파 검사상 좌심방의 직경(57.2mm : 77.4mm, p=0.106)은 통계학적 유의성이 없었다. 결론: 심방세동이 있는 환자에서 동반 질환 수술시 병행하여 수술한다면 정상 동성 율동으로 회복될 기회를 증가시킬 수 있는 유용한 수술법으로 생각된다. 그러나 수술후 재발률을 감소시키기 위하여 적절한 술기의 변형에 대한 연구와 약물요법의 병행을 고려하여야 할 것으로 사료된다.

• Fire Science and Engineering
• /
• v.32 no.6
• /
• pp.108-116
• /
• 2018

A melted bead microstructure can be divided into a deformed and undeformed layer. Measurement errors occur in the presence of a deformed layer, which should be removed through grinding/polishing whilst preserving the original structure. This paper proposes a grinding/polishing process to analyze the microstructure of copper melted beads. For the removal of the deformed layer, the correlation between the abrasive type/size, the polishing time and polishing rate was analyzed and the thickness of the deformed layer was less than $1{\mu}m$. The results suggest a new grinding/polishing procedure: silicon carbide abrasive $15{\mu}m$ (SiC P1200) 2 min, and $10{\mu}m$ (SiC P2400) 1 min; and diamond abrasive $6{\mu}m$ 8 min, $3{\mu}m$ 6 min, $1{\mu}m$ 10 min, and $0.25{\mu}m$ 8 min. In addition, a method of increasing the sharpness of the microstructure by chemical polishing with $0.04{\mu}m$ colloidal silica for 3 min at the final stage is also proposed. The overall grinding/polishing time is 38 min, which is shorter than that of the conventional procedure.

• Journal of dental hygiene science
• /
• v.10 no.6
• /
• pp.459-464
• /
• 2010

The purpose of this study was to evaluate the physical properties of hydrophilic polyvinyl siloxane impression materials as change of material's storage temperatures. Working time, strain-in-compression, elastic recovery and consistency were tested according to ISO Standard NO. 1563. The results are as followed. 1. Working time decreased in cold storage. 2. Strain-in-compression was different in storage temperatures. Material's strain-in compression in cold temperatures were higher than in room temperature and in incubator. 3. A coefficient of elastic recovery varied by storage temperatures. The rate in cold temperature was the lowest and in incubator was the highest. 4. Consistency of impression substance different in storage temperatures. The extent in cold temperature is the highest and in incubator was the lowest. Statistical analysis(SPSS 14.0k, p>0.05) showed that storage temperature affect to material's physical properties. We recognized that the physical properties of polyvinyl siloxane impression materials were changed according to storage temperature.

• Korean Journal of Materials Research
• /
• v.24 no.11
• /
• pp.578-584
• /
• 2014

To synthesize Sn nanoparticles (NPs) less than 30 nm in diameter, a modified polyol process was conducted at room temperature using a reducing agent, and the effects of different pH values of the initial solutions on the morphology and size of the synthesized Sn NPs were analyzed. tin(II) 2-ethylhexanoate, diethylene glycol, sodium borohydride, polyvinyl pyrrolidone (PVP), and sodium hydroxide were used as a precursor, reaction medium, reducing agent, capping agent, and pH adjusting agent, respectively. It was found by transmission electron microscopy that the morphology of the synthesized Sn NPs varied according to the pH of the initial solution. Moreover, while the size decreased to 11.32 nm with an increase up to 11.66 of the pH value, the size increased rapidly to 39.25 nm with an increase to 12.69. The pH increase up to 11.66 dominantly promoted generation of electrons and increased the amount of initial nucleation in the solution, finally inducing the reduced-size of the Sn particles. However, the additional increase of pH dominantly induced a decrease of PVP by neutralization, which resulted in acceleration of the agglomeration by collisions between particles.

• Journal of the Korean Wood Science and Technology
• /
• v.38 no.1
• /
• pp.1-10
• /
• 2010

In this study, to study an effective use and improve strength performances of woods and wood-based materials, three-ply hybrid laminated woods which are composed of spruce in the face and three kinds of wood-based boards (MDF, PB, OSB) in the core were manufactured, and the effect of constitution elements used for the core laminae on bending creep performances was investigated. The shape of creep curves showed exponential function plots which the upper right side was increased, and differed among the kinds of wood-based boards used for the core laminae of hybrid laminated wood. The creep deformation perpendicular to the grain of faces of hybrid laminated woods was in order $C_{\perp}$(P) > $C_{\perp}$(M) > $C_{\perp}$(O) with PB, MDF and OSB in the core, respectively. It was found that the creep deformation arranged with OSB in the core had 2 times smaller than those arranged with MDF and PB in the core. By hybrid laminating, the creep deformation of spruce perpendicular to the grain was markedly decreased. On the other hand, the creep deformation parallel to the grain of the faces ($C_{\parallel}$ type) of hybrid laminated woods was in order $C_{\parallel}$(P) > $C_{\parallel}$(O) > $C_{\parallel}$(M) with PB, OSB and MDF in the core. The ratios among three hybrid laminated woods were considerably decreased, especially the difference between $C_{\parallel}$(P) and $C_{\parallel}$(O) hybrid laminated woods arranged with PB and OSB in the core was very small. These values showed 0.108~0.464 times smaller than creep deformation of three wood-based boards and it was found that creep deformation of three wood-based boards was considerably decreased by hybrid laminating. Creep anisotropy of hybrid laminated woods was greater in creep deformation than in initial deformation, whereas it was found that the values was much smaller than that of spruce parallel laminated woods.

• Computational Structural Engineering
• /
• v.6 no.4
• /
• pp.57-66
• /
• 1993

The p-version crack model based on integrals of Legendre polynomial and virtual crack extension method is proposed with its potential for application to stress intensity factor computations in linear elastic fracture mechanics. The main advantage of this model is that the data preparation effort is minimal because only a small number of elements are used and high accuracy and the rapid convergence can be achieved in the vicinity of crack tip. There are two important findings from this study. Firstly, the limit value, the strain energy of the exact solution, can be estimated with successive three p-version approximations by ascertaining that the approximations enter the asymptotic range. Secondly, the rate of convergence of p-version model is almost twice that of h-version model on the basis of uniform or quasiuniform mesh refinement for the cracked panel problem subjected to tension.

• Journal of Oral Medicine and Pain
• /
• v.20 no.2
• /
• pp.347-360
• /
• 1995

악관절장애환자의 임상 평가를 위해서 고안된 여러 지수 중 현재 가장 널리 사용되고 있는 두개하악장애지수와 평가방법을 새로 고안한 변형 두 개하악장애 지수, 혼합두개하악장애지수를 비교하여 환자의 증상변화를 민감하게 감지하는 능력을 알아보고자 본연굴를 시행하였다. 두개하악장애지수의 기준에 따라 단국대학교 치과병원 구강내과에 내원한 악관절장애환자 20명을 대상으로 임상검사를 시행하여 두개하악장애지수, 변형두개하악장애지수, 혼합 두 개하악장애 지수를 산출하였다. 치료전, 치료후 2주, 치료후 4주에 수집된 결과를 각 지수간에 비교분석하여 다음과 같은 결과를 얻었다. 악관절장애환자의 증상평가에서 변형두개하악장애지수가 환자의 증상변화를 가장 민감하게 감지하는 것으로 나타났다(P(0.05). 따라서 사용된 세가지 지수중 변형 두개하악장애지수가 악관절장애환자의 경과를 관찰할 때 증상변화를 관찰하기 위한 가장 효과적인 방법이라고 사료된다.

• Journal of Technologic Dentistry
• /
• v.14 no.1
• /
• pp.91-94
• /
• 1992

This study was made to change dimension of self-curing resin by various curing technics. Specimens were fabricated 45 by 7 curing method. Six measurements(distances AB,BC,CD, AD, AC, and BD) were made of mold section and recorded with micrometer(1/20 mm). The results of the experiment were as follows : 1. The air pressure cured specimens exhibited more distoration than the bench-cured, watercured, and monomer atmosphere-cured specimens(P < 0.05). 2. The water pressure cured specimens exhibited more distoration sphere-cured specimens (P < 0.(15).

• Journal of Powder Materials
• /
• v.1 no.1
• /
• pp.60-65
• /
• 1994

When a commercial prealloyed Fe-powder(Fe-5Cr-lMo-2Cu-0.5P-3C) is liquid phase sintered at 116$0^{\circ}C$, liquid precipitates with various shapes form within solid grains during the initial stage of sintering. The shape of a liquid precipitate changes pith the increment of their size from sphere(with radius<0.3$\mu\textrm{m}$), a transient polyhedron with more than 7 faces(1~2 $\mu\textrm{m}$), cuboid(3~5 $\mu\textrm{m}$), and finally to sphere(>5 $\mu\textrm{m}$). The shapes of liquid precipitates closely resemble the growth shapes predicted on the basis of solid-liquid interfacial energy and the coherency strain energy with anisotropic elastic constants in the diffusion zone around the precipitates.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.19 no.1
• /
• pp.79-85
• /
• 2011

A study on characteristics for removal of arsenic ion using phosphorylated pine needles was performed. The surface condition of phosphorylated pine needles was confirmed by FT-IR, SEM(Scanning Electron Microscopy) and EDX(Energy Dispersive X-ray). The removal rate of arsenic ion was the highest as about 98% at pH 7. Most absorption for arsenic ion was also completed within 30min and decreased with time and pH of arsenic solution from 6.5 to 2.4.