• Journal of the Korean Geotechnical Society
• /
• v.15 no.4
• /
• pp.167-173
• /
• 1999

In this paper the failure behavior of the reinforced earth retaining wall structures according to the deformed types of the face was studied by model test using carbon rods. In model test the behavior of the face for the model of the reinforced earth wall was divided into three cases : the displacement of the top part(case 1), the lateral displacement(case 2) and the displacement of the lower part (case 3). The photographic method was applied to examine the failure line of the deformed wall with the naked eye. The failure line shows a parabolic shape for case 1, a large circular arc for case 2 and a logarithmic spiral for case 3 in the experimental results. The design failure line for the coherent gravity structure hypothesis was most similar to the failure line for the case of the lower part displacement.

• Journal of Welding and Joining
• /
• v.19 no.5
• /
• pp.492-498
• /
• 2001

In the previous study, temperature monitoring of case about shrinkage fit process was performed and heat transfer model was developed in detail by feedback and tuning among monitoring result, process investigation, and analysis result. The gap element in contact between case and core was effectively used in analysis model. In present study, following things are performed to solve deformation of case due to shrinkage fit process on the basis of previous result. Above all, mechanical material properties of case are measured by case specimen for deformation analysis considering weldment of case. Deformation of case before and after shrinkage fit process is measured, too. Three dimensional deformation model is developed by the comparison and inspection between these experimental data and analysis results. Deformation analysis is simulated with the result of heat transfer analysis, in other words, non-coupled analysis is used. Finally the countermeasure for deformation is brought up through those.

• Journal of the Korea Convergence Society
• /
• v.11 no.10
• /
• pp.225-229
• /
• 2020

In this study, the deformation and stress on each model was analyzed and the strength was compared with each other when the impacts on a total of four smart phone models was given. Models B and D with cases can be seen to have less deformation and stress than models A and C without cases. The models including the case have higher masses than the models without the case. So, the deformation and stress can be reduced by absorbing the impact force. In addition, the masses of models C and D are smaller than models A and B, but the stresses and deformations are seen to be smaller. If a case specialized for edge protection is chosen and designed when manufacturing a smart-phone in order to absorb the shock while weighing less, it is thought to improve the strength of the smart-phone and increase the durability. And it is seen that this study is adequate at the efficient design with durability of smart phone case practically and the aesthetic convergence of smart phone.

• The Journal of the Korea Contents Association
• /
• v.10 no.1
• /
• pp.486-497
• /
• 2010

The purpose of this study is to investigate the research trends and the present conditions of real digital texts on "Visual Transformation." For the purpose of this study adopted two different methods: meta analysis and case study. The research trends on visual transformation of digital text were investigated through analyzing the total of 167 literature by means of synthetic meta analysis. Relevant literature was categorized into three types of research: functional, dynamic, and interactional transformation. The type of literature and research methods in each literature were analyzed. The present conditions of real digital texts on visual transformation were investigated by means of case study. The well designed 12 e-learning contents selected and analyzed in terms of the analysis framework which was drawn by the research trends. The results suggested problems as follows in designing e-learning contents. Firstly, there were some cases that did not follow the basic design principles related to typography. Secondly, the content was just provided in each learning steps without consideration of design to enhance text comprehension in many cases. Thirdly, web technology adequately was not applied to design e-learning contents.

• The Journal of the Korea Contents Association
• /
• v.17 no.9
• /
• pp.437-448
• /
• 2017

This study was conducted as a qualitative case study for examining what transformed primary concepts and transformed schemas were formed for the addition of decimals and how they were formed, and how the relational understanding of the addition of decimals was in three 3rd grade elementary school children who had studied the primary concepts of division, fraction and decimal. That is, this study investigated how the subjects approached problems of decimal addition using transformed primary concepts and transformed schemas formed by themselves, and how the subjects formed concepts and transformed schemas in problem solving. According to the results of this study, transformed primary concepts and transformed schemas formed through the learning of the primary concepts of division, fraction, and decimal functioned as important factors for the relational understanding of decimal addition.

• Journal of the Korean GEO-environmental Society
• /
• v.8 no.6
• /
• pp.29-36
• /
• 2007

The control and prediction of surface settlement, gradient and ground displacement are the main factors in urban tunnel construction. This paper carried out the estimation and prediction of ground behavior around tunnel due to excavation using computational method and case study in detail for the analysis of deformation behavior in urban NATM tunnel. Computational method was performed by FLAC-2D with strain softening model and elastic plastic model. Field measurements of surface subsidence and ground displacement were adopted to monitor the ground behavior resulting from the tunneling and these values were applied to modify tunnel design parameters on construction.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.7 no.1
• /
• pp.131-139
• /
• 1987

In this study, characteristics of multi-photos and optimal photographing method are suggested by analyzing the normal case and convergent case with multiple method. The optimal photographing method is applied to deformation measurement of a model miniature structure under loading. Comparing with conventional measurement method in accuracy, efficiency and proprities of application of this method are suggested. As a result, the optimal photographing condition is ideal at $90^{\circ}$ convergent multiple case, whose measurement values approach to that of precision level within $5{\sim}9{\mu}m$ and bring more than about 55% improvement of accuracy comparing with normal case at the number of photos respectively. Therefore application of this method in deformation measurement as well as precision analysis of structures is desired in precision and economical aspect.

• Journal of the Korean School Mathematics Society
• /
• v.18 no.4
• /
• pp.353-370
• /
• 2015

This study was conducted as a qualitative case study that explored how gifted 3rd-grade elementary school children who had learned the primary concepts of division and fraction, when they studied contents about decimal, formed the transformed primary concept and transformed schema of decimal by the learning of accurate primary concepts and connecting the concepts. That is, this study investigated how the subjects attained relational understanding of decimal based on the primary concepts of division and fraction, and how they formed a transformed primary concept based on the primary concept of decimal and carried out vertical mathematizing. According to the findings of this study, transformed primary concepts formed through the learning of accurate primary concepts, and schemas and transformed schemas built through the connection of the concepts played as crucial factors for the children's relational understanding of decimal and their vertical mathematizing.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.13 no.1
• /
• pp.203-211
• /
• 1993

Experiment on the instability and breaking of the initially modulated deep-water wave train (in wave amplitude or in wave frequency) is performed to investigate the effect of the initial modulation on nonlinear wave evolution. Wave amplitude and frequency modulations are developed earlier and larger than in the case of the uniform deep-water wave trains. However, for small wave steepness in the initially amplitude-modulated wave train, the wave train becomes demodulated and nearly returns to the original wave form at the end of the wave evolution far downstream from the breaking region, with energy returning to the fundamental wave frequency.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.8 no.2
• /
• pp.69-75
• /
• 2009

This study is analyzed by impact simulation according to material property at terminal case of hand phone. Maximum equivalent stress or strain at plastic is 40 times as great as that at magnesium alloy. And the next greatest stress or strain is shown at aluminium alloy. The value of maximum equivalent stress is shown as 6.5 Mpa in case of plastic, magnesium alloy and aluminium alloy. Maximum shear strain at plastic is 40 times as great as that at magnesium alloy. And the next greatest strain is shown at aluminium alloy. The value of deformation or strain at magnesium alloy and aluminium alloy is not different.