• Title/Summary/Keyword: 변형해석

Search Result 4,836, Processing Time 0.031 seconds

Strain Analysis of Mechanical Structure by Laser Speckle Interferometry (레이저 스페클 간섭법에 의한 구조물의 변형해석)

  • 김경석;강기수
    • Journal of the Korean Society for Precision Engineering
    • /
    • v.21 no.5
    • /
    • pp.19-23
    • /
    • 2004
  • 최근 산업의 고도화와 함께 초고온, 방사선노출 등과 같은 극한환경에서 사용되는 구조물과 MEMS 와 같은 미소 구조물(Hicrostructure)이 많아지고 있으며, 이들의 변형해석을 위한 기존의 접촉식 기법들은 그 한계를 극복해야 할 필요가 있다 해결방안으로 레이저를 이용한 비접촉 측정방식이 많은 발전을 해오고 있으며, 특히, 스페클간섭법(Speckle inteferometry)기반의 변형해석 기술이 가장 뛰어난 기술로 인정받고 있다. 스페클간섭법은 컴퓨터 화상처리기술에 힘입어 전자처리 스페클간섭법(Electronic Speckle Pattern Interferometry : ESPI)으로 발전을 하고 있으며, 자동차와 같은 대형구조물의 변형해석에서 MEMS 구조물과 같은 미소구조물 변형해석까지 그 적용범위가 매우 넓다. 본 논문에서는 ESPI 를 이용한 변형해석분야의 국내외 기술현황 및 적응사례, 발전방향를 소개하였다.(중략)

Application of New Edge-to-Edge Contact Algorithm to Discontinuous Deformation Analysis (불연속 변형해석에서의 새로운 선-선 접촉 해석 적용)

  • Lee Chung-In;Moon Young-Sam;Choi Yong-Keun;Ahn Tae-Young
    • Tunnel and Underground Space
    • /
    • v.15 no.4 s.57
    • /
    • pp.305-315
    • /
    • 2005
  • DDA (Discontinuous Deformation Anlaysis) is one of the latest numerical analysis which has merits of both FEM and DEM. In this research a new edge-to-edge contact algorithm was applied on DDA. With adoption of new edge-to-edge contact state definition, sub-algorithm was improved about open-close iteration, contact state judge, contact detecting, and friction forces acting on joints. Newly applied DDA was verified based on two different cases. The DDA results show good agreement with numerically predicted one.

A Closed Form Nonlinear Solution for Large Pure Bending Deformation of Solid Plate (고체 평판의 비선형 순수굽힘변형에 대한 수학적 정해)

  • Youngjoo Kwon
    • Journal of the Korean Society for Precision Engineering
    • /
    • v.15 no.12
    • /
    • pp.220-225
    • /
    • 1998
  • 압축성 초탄성 평판의 순수굽힘에 대한 비선형 변형해석의 수학적 정해가 본 논문에 구해져 있다. 이차원 평면 변형도 상태가 해석을 위하여 가정되었으며, 비선형 순수굽힘 변형해석결과는 고전적인 선형 순수굽힘 변형해석결과와 비교되었다. 고전적인 선형굽힘 결과와는 다르게 비선형 순수굽힘 상태에서는 반경방향응력은 영이 아니며 또한 각방향응력도 선형 상태가 아닌 것으로 규명되었다.

  • PDF

Structural Analysis of Robot Structure Handling Nuclear Fuel Assembly in Liquid Metal Reactor VesselII: Static Deflection Analysis (액체금속로 핵연료교환장치의 구조해석II : 정적 휨변형해석)

  • 권영주;김재희
    • Journal of the Computational Structural Engineering Institute of Korea
    • /
    • v.12 no.4
    • /
    • pp.583-589
    • /
    • 1999
  • 본 논문에서는 MDO기법에 의한 핵연료교환장치의 구조해석 단계 중 핵연료교환장치의 휨 변형을 구하는 재료역학해석을 수행하였다. 이는 액체 금속로(LMR) 핵연료교환장치의 기본설계를 위하여 매우 중요하다. 해석대상 핵연료교환장치의 정적구조는 기 수행한 핵연료교환장치의 기구 동역 학 해석 결과를 활용하였다. 네 가지 핵연료교환동작에 대하여 핵연료 봉의 무게를 100㎏에서 500㎏까지 100㎏씩 증가시켜 휨 변형의 크기를 구하였다. 그 결과 회전 중심 축에서 가장 멀리 있는 핵연료 봉을 교환하는 핵연료교환동작에서 최대 휨 변형이 발생함이 밝혀졌다. 또한 이 최대 휨 변형이 발생하는 핵연료교환장치구조에 대하여 부재의 단면두께를 축소하면서, 또 단면형상을 여러 가지로 바꾸면서 휨 변형크기를 구하여 비교하였다. 비교결과 비교대상 단면형상 중에서 중공직사각형 단면이 최소 휨 변형이 발생하는 최적단면형상임이 밝혀졌다.

  • PDF

내접구를 이용한 3차원 불연속 변형해석의 접촉문제 연구

  • An, Tae-Yeong;Song, Jae-Jun
    • Proceedings of the Korean Society for Rock Mechanics Conference
    • /
    • 2009.03a
    • /
    • pp.153-159
    • /
    • 2009
  • 불연속변형해석(DDA)은 유한요소법(FEM)과 개별요소법(DEM)의 장점을 모두 가지고 있는 해석법이다. 3차원 불연속변형해석의 안정성과 해석속도는 접촉찾기(Contact Detection) 알고리즘과 벌칙스프링(Penalty spring)을 이용한 접촉처리 알고리즘에 의해 크게 좌우되는데, 블록의 꼭지점(vertex) 간의 접촉이 발생할 경우, 적합한 접촉면을 결정하는 과정에서 많은 해석오류와 시간적 손실이 발생할 가능성이 있다. 본 연구에서는 블록의 꼭지점에 내접하는 구(inscribed sphere)를 삽입하여 가상의 접촉점과 접촉면을 생성하는 알고리즘을 연구하였다. 이로 인해 발생할 수 있는 해석의 오차의 크기를 확인하고, 간단한 불연속 변형해석의 해석 실례에 적용해 보았다.

  • PDF

Analysis of Buried Pipelines Using Ground Strain Input from Seismic Waves (지반변형률에 의한 매설관의 지진차 거동 해석)

  • Kim, Moon-Kyum;Cho, Woo-Yeon;Eo. Jun;Lee, Kang-Won
    • Journal of the Earthquake Engineering Society of Korea
    • /
    • v.4 no.4
    • /
    • pp.15-26
    • /
    • 2000
  • 지진파 전파로 인한 매설관에 작용하는 지진하중은 지진특성 및 지반조건에 따른 지반변형률로부터 산정되어야 한다. 그러나. 기존에 사용되고 있는 경험적인 방법에 의해 계산된 지반변형률 모형은 지진 및 지반의 지역적 특수성을 고려할 수 없는 문제점을 내포하고 있다. 따라서, 본 연구에서는 이러한 문제점을 개선하기 위하여 지진특성 및 지반조선을 반영할 수 있는 수정된 지반변형률 모형을 제안하고 개발된 모형을 매설관로의 지진해석에 지진하중으로 적용하였다. 여기서, 지반변형률을 예측하기 위한 지진판 전파속도는 지반조건을 고려할 수 있도록 파 에너지분포에 근거한 분산곡선을 제안하여 산정하였다. 이러한 과정을 통해 얻어진 지반변형률 산정방법에 타당성을 파악하기 위해 예측한 지반변형률과 과거 지진으로 실측된 지반변형률을 비교하였다. 타당성이 입증된 지반변형률 모형을 매설관의 하중으로 적용하여 지진해석을 실시하였으며, 계산결과는 범용 유한요소해석을 통한 동해석 및 응답변위법에 의한 결과와 비교하였다. 이를 통해 지반 변형률 모형을 적용한 매설관 지진해석의 타당성을 검증하였다. 또한, 지진 및 지반환경이 다른 다양한 관의 특성을 반영하기 위해, 지진 지반 및 관의 영향 인자에 대해 매개변수 해석에 실시되었으며, 이로써 본 연구의 활용성을 검토하였다.

  • PDF

Response Analysis of Buried Pipeline Subjected to Longitudinal Permanent Ground Deformation (종방향 영구지반변형에 대한 지중 매설관로의 거동특성 해석)

  • 김문겸;임윤묵;김태욱;박종헌
    • Journal of the Earthquake Engineering Society of Korea
    • /
    • v.6 no.2
    • /
    • pp.51-61
    • /
    • 2002
  • In this research, a numerical algorithm is developed for the response analysis of burined pipelines considering longitudinal permanent ground deformation(PGD) due to liquefaction induced lateral spreading. Buried pipelines and surrounding soil are modeled as continuous pipelines using the beam elements and a series of elasto-plastic springs represented for equivalent soil stiffness, respectively. Idealized various PGD patterns based on the observation of PGD are used as a loading configuration and the length of the lateral spread zone is considered as loading parameter. Numerical results are verified with other research results and efficient applicability of developed procedure is shown. Analyses are performed by varying different parameters such as PGD pattern, pipe diameter and pipe thickness. Through these procedures, relative influences of various parameters on the response of buried pipeline subject to longitudinal PGD are investigated.

Correspondence Theorem in Viscoelastic Beams (점탄성보에서의 상응원리)

  • 정경환;정관수
    • Proceedings of the Korean Fiber Society Conference
    • /
    • 2002.04a
    • /
    • pp.57-61
    • /
    • 2002
  • 점탄성학은 고분자물과 같이 기계적 성질이 시간에 따라 변하는 물질의 응력과 변형해석에 관한 학문이다. 이에 대한 이전의 문헌들은 균일변형시의 조성식에 대한 주제를 주로 다룬 반면, 경계조건 문제(boundary value problem)로서의 불균일 변형해석에 대한 논의가 부족한 편이다. 본 논문에서는 불균일 변형해석에 유용한 상응원리 (correspondence theorem)[1]을 보이론(beam theory)에 적용하는 경우, 적용가능조건을 유도하는 한편 상응원리를 적용 예를 들어 설명하였다. (중략)

  • PDF

Block Deformation Analysis Using Three-dimensional Discontinuous Deformation Analysis(DDA) (삼차원 불연속 변형 해석(DDA)을 이용한 블록거동해석)

  • 장현익;이정인
    • Tunnel and Underground Space
    • /
    • v.12 no.3
    • /
    • pp.158-170
    • /
    • 2002
  • Since the development of Discontinuous Deformation Analysis (DDA) by Shi (1984), there has been much improvement in the theory and programs. These, however, are all based on the assumption of a two-dimensional plane strain or plane stress state; and because a rock block system is a three-dimensional problem, a two-dimensional analysis has limited application. So a three-dimensional analysis is required in the design of rock slopes and underground spaces where three-dimensional discontinuities dominate stability. In this study three-dimensional DDA program is developed using the Shi's two-dimensional theory and program, and the two cases of three-dimensional block are analysed. The program is applied to one sliding-face blocks and wedge sliding and it gives the good results comparing to the exact solution. Multi-block cases will be analysed for many other application soon.

A Study on the Butt Welding Deformation Considering Dog-Piece Setting (도그 피스 설치량에 따른 맞대기 용접 변형 연구)

  • Ryu, Hyun-Su
    • Journal of the Korean Society of Marine Environment & Safety
    • /
    • v.21 no.2
    • /
    • pp.194-199
    • /
    • 2015
  • In this study, experiments of welding deformation considering dog-pieces setting were performed to assess the effect of dog-pieces on welding deformations quantitatively and an analysis method of welding deformations considering dog-pieces was proposed. Experimental results show the relationship between welding deformations and dog-pieces setting quantitatively. The maximum reduction of welding deformation was measured as 74%. The proposed numerical analysis method to predict welding deformations is one of thermal elasto-plastic analyses using a circular heat flux and finite elements model and has been verified through experiments of welding deformation. The proposed analysis method is expected to be used in a variety of fields as an analysis tool to assess or establish guidelines for a proper use of dog-pieces.