• Journal of Hospice and Palliative Care
• /
• v.16 no.1
• /
• pp.10-19
• /
• 2013

Purpose: Home-based care providers were surveyed to assess the effect of collaborative service between Gyeongnam Regional Cancer Center (GRCC) and public health centers (PHCs) in Gyeongnam province. Methods: Twenty home-based care providers who had previously participated in the GRCC-PHC care project were recruited from nine PHCs and were surveyed using a questionnaire developed by specialists. Questions were rated using the 5-point Likert scale ranging from "strongly disagree (-2)" to "strongly agree (+2)" and each score was multiplied by the corresponding number of respondents (n=20) with the maximum score of 40. Results: Between January 2008 and December 2011, 73 patients were registered to the collaborative service: 72 by GRCC and one by PHC. Home-based care providers marked the highest score (23 points) to "The collaborative service contributed to patients and their family's psychological stability" and the lowest score (11 points) to "The collaborative service was generally helpful for home-based cancer management." For possible suggestions to improve the service, the highest score (35 points) was given to "Simplification of the hospitalization process" followed by "Substantial benefits for patients at their visit to the hospital" (34 points). Conclusion: The results revealed several limitations of the GRCC-PHC collaborative care service for terminal cancer patients. The service could be further improved by developing measures to address the limitations and a service model tailored to region-specific needs.

• The Korean Journal of Food And Nutrition
• /
• v.29 no.3
• /
• pp.438-447
• /
• 2016

This study was conducted in order to investigate the physiochemical properties and antioxidative activity of red ginseng manufactured using the high temperature high pressure (HTHP) process, which is faster and simpler than the conventional process. According to increasing the steaming temperature, pressure and time, the content of minor non-polar ginsenosides, such as Rg3, Rk3, Rh4, Rk1 and Rg5 gradually increased. Also, the contents of acidic polysaccharide, total phenolic compounds and maltol gradually increased. Based on the results of the physiochemical properties and appearance quality, the optimum conditions of HTHP process were estimated as $140^{\circ}C$, $3kg/cm^2$ in 20 min. The total phenolic compounds and maltol contents of the HTHP process red ginseng (1.0% and 2.49 mg%, respectively) were higher than those of conventional red ginseng (0.23% and 0.60 mg%, respectively). In addition, the antioxidative activity was investigated using DPPH (2,2-diphenyl-1-picrylhydrazyl) and ABTS (2,2'-aziono-bis(3-ethylbenzthiazoline-6-sulfonic acid)) radical scavenging activity. DPPH and ABTS radical scavenging activities of HTHP process red ginseng increased by 3.4 and 3.6 folds, respectively, compared with conventional red ginseng. In addition, total phenolic compounds and maltol contents, as well as the antioxidant activity of the HTHP process red ginseng were similar to black ginseng. The present results suggest that the HTHP process is available for the development of value-added red ginseng products.

• Korean Journal of Food Science and Technology
• /
• v.28 no.6
• /
• pp.1104-1110
• /
• 1996

To lessen the initial level of microorganism in kimchi, the preparation method of seasoning mixture was modified and electrolyzed acid-water was substitute for washing water and brine water. Changes in the microbial counts of the red pepper powder-garlic mixture prepared with red pepper powder, garlic and 4.8% (w/w) water (tap water and electrolyzed acid-water) of manufactured kimchi showed that coliform count and E. coli count were reduced to 93% and 98%, of the initial level in the tap water added red pepper powder-garlic mixture and 97% and 99% in the electrolzed acid-water added mixture after 6 hours of mix. After 24 hours of mix, no E. coli was recovered in borth mixtures. Microbial levels were revealed as $2.4{\times}10^5\;CFU/g$ for total count, $2.3{\times}10^5\;CFU/g$ for Lactobacillus count. $1.0{\times}10^2{\;}CFU/g$ of coliform count and $10^1\;CFU/g$ of E. coli count in the seasoning mixture prepared by the general method, and $4.2{\times}10^5\;CFU/g$ of total count, $4.0{\times}10^5CFU/g$ of Lactobacillus count, $1.0{\times}10^3\;CFU/g$ of coliorm count and $4.0{\times}10^2\;CFU/g$ of E. coli count in the mixture propared by the modified method. During fermentation at $10^{\circ}C$, the levels of total and Lactobacillus counts in kimchi prepared by the modified method were significantly lower than those of kimchi were recovered in kimchi prepared by the modified method, whereas there were at the level of $10^1\;CFU/g$ in kimchi prepared by the general method. The pH and acidity of kimchi prepared by the modified method were 4.66 and 0.54%, respectively, whereas those in kimchi prepared b the general method were 4.51 and 0.70%, respectively. But after 14 days of fermentation significant differences were not observed in the changes of microbial, pH and acidity for both kimchi.

• Journal of the Korea Concrete Institute
• /
• v.27 no.2
• /
• pp.185-193
• /
• 2015

Ultra high performance concrete (UHPC) has been developed to overcome the low tensile strengths and brittleness of conventional concrete. Considering that UHPC, owing to its composition and the use of steel fibers, develops a compressive strength of 180 MPa as well as high stiffness, the top flange of the steel girder may be superfluous in the composite beam combining a slab made of UHPC and the steel girder. In such composite beam, the steel girder takes the form of an inverted-T shaped structure without top flange in which the studs needed for the composition of the steel girder with the UHPC slab are disposed in the web of the steel girder. This study investigates experimentally and analytically the flexural behavior of this new type of composite beam to propose details like stud spacing and slab thickness for further design recommendations. To that goal, eight composite beams with varying stud spacing and slab thickness were fabricated and tested. The test results indicated that stud spacing running from 100 mm to 2 to 3 times the slab thickness can be recommended. In view of the relative characteristic slip limit of Eurocode-4, the results showed that the composite beam developed ductile behavior. Moreover, except for the members with thin slab and large stud spacing, most of the specimens exhibited results different to those predicted by AASHTO LRFD and Eurocode-4 because of the high performance developed by UHPC.

• Journal of the Korea Concrete Institute
• /
• v.14 no.1
• /
• pp.126-135
• /
• 2002

Plate bonding technique has been widely used in strengthening of existing concrete structures, although it has often a serious problem of premature falure such as interface separation and rip-off. However, this premature failure problem has not been well explored yet especially in view of local failure mechanism around the interface of plate ends. The purpose of the present study is, therefore, to identify the local failure of strengthened plates and to derive a separation criterion at the interface of plates. To this end, a comprehensive experimental program has been set up. The double lap pull-out tests considering pure shear force and half beam tests considering combined flexure-shear force were performed. The main experimental parameters include plate thickness, adhesive thickness, and plate end arrangement. The strains along the longitudinal direction of steel plates have been measured and the shear stress were calculated from those measures strains. The effects of plate thickness, bonded length, and plate end treatment have been also clarified from the present test results. Nonlinear finite element analysis has been performed and compared with test results. The Interface properties are also modeled to present the separation failure behavior of strengthened members. The cracking patterns as well as maximum failure loads agree well with test data. The relation between maximum shear and normal stresses at the interface has been derived to propose a separation failure criterion of strengthened members. The present study allows more realistic analysis and design of externally strengthened flexural member with steel plates.

• Korean Journal of Food Science and Technology
• /
• v.50 no.1
• /
• pp.117-121
• /
• 2018

Puffing process modifies the chemical and physical properties of the grains. In this study, oats were puffed by subjecting them to pressure of 1.0 and 1.2 MPa, following which the bioactive constituents and antioxidant activities in the oat extracts were investigated. The polyphenol content in puffed oat extracts increased in a pressure-dependent manner (109 and 157 mg gallic acid equivalent/100 g at 1.0 and 1.2 MPa, respectively). In addition, gallic acid was synthesized after puffing ($518{\mu}g/g$ of extract at 1.0 MPa) and was the most abundant phenolic acid in puffed oats. The antioxidant activities, which were determined by 1, 1-diphenyl-2-picrylhydrazyl (DPPH) and 2, 2-azino-bis-3-ethylbenzothiazoline-6-sulphonic acid (ABTS) radical scavenging activities, were improved in oat extracts after puffing (+245 and +184% at 1.2 MPa, respectively). In conclusion, puffing process of oats increased the extractability of polyphenols, including gallic acid, which positively affected its antioxidant activities. These results will provide useful information when using puffed oats for food production.

• The Journal of the Petrological Society of Korea
• /
• v.28 no.3
• /
• pp.157-169
• /
• 2019

Pseudotachylytes, produced by frictional heating during seismic slip, provide information that is critical to understanding the physics of earthquakes. We report the results of occurrence, structural characteristics, scanning electron microscopic observation and geochemical analysis of pseudotachylytes, which is presumed to have formed after the Late Cretaceous in outcrops of the Paleoproterozoic granitic gneiss on the Bulil waterfall of the Jirisan area, Yeongnam massif, Korea. Fault rocks, which are the products of brittle deformation under the same shear stress regime in the study area, are classified as pseudotachylyte and foliated cataclasite. The occurrences of pseudotachylyte identified on the basis of thickness and morphology are fault vein-type and injection vein-type pseudotachylyte. A number of fault vein-type pseudotachylytes occur as thin (as thick as 2 cm) layers generated on the fault plane, and are cutting general foliation and sheared foliation developed in granitic gneiss. Smaller injection vein-type pseudotachylytes are found along the fault vein-type pseudotachylytes, and appear in a variety of shapes based on field occurrence and vein geometry. At a first glance fault vein-type seudotachylyte looks like a mafic vein, but it has a chemical composition almost identical to the wall rock of granitic gneiss. Also, it has many subrounded clasts which consist predominantly of quartz, feldspar, biotite and secondary minerals including clay minerals, calcite and glassy materials. Embayed clasts, phenocryst with reaction rim, oxide droplets, amygdules, and flow structures are also observed. All of these evidences indicate the pseudotachylyte formed due to frictional melting of the wall rock minerals during fault slip related to strong seismic faulting events in the shallow depth of low temperature-low pressure. Further studies will be conducted to determine the age and mechanical aspect of the pseudotachylyte formation.

• Korean Journal of Plant Resources
• /
• v.32 no.4
• /
• pp.255-263
• /
• 2019

Glycyrrhizae radix is one of the most frequently prescribed ingredients in Oriental medicine, and Glycyrrhizae radix extract has been shown to exert anti-cancer effects. However, the cellular and molecular mechanisms of programed cell death (apoptosis) by Glycyrrhizae radix are poorly defined. In the present study, it was examined the molecular mechanisms of apoptosis by water extracts of Glycyrrhizae radix (GRW) in human bladder T24 cancer cells. It was found that GRW could inhibit the cell growth of T24 cells in a concentration-dependent manner, which was associated with the induction of apoptotic cell death, as evidenced by the formation of apoptotic bodies, DNA fragmentation and increased populations of annexin-V positive cells. The induction of apoptotic cell death by GRW was connected with an up-regulation of pro-apoptotic Bax protein expression and down-regulation of anti-apoptotic proteins (Bcl-2 and Bcl-xL), and inhibition of apoptosis family proteins (XIAP, cIAP-1 and cIAP-2). In addition, apoptosis-inducing concentrations of GRW induced the activation of caspase-9, an initiator caspase of the mitochondrial-mediated intrinsic pathway, and caspase-3, accompanied by proteolytic degradation of PARP. GRW also induced apoptosis via a death receptor-mediated extrinsic pathway by caspase-8 activation, resulting in the down-regulation of total Bid and suggesting the existence of cross-talk between the extrinsic and intrinsic pathways. Taken together, the present results suggest that GRW may be a potential chemotherapeutic agent for the control of human bladder cancer cells.

• (The)Study of the Eastern Classic
• /
• no.34
• /
• pp.225-255
• /
• 2009

Few data on the epigraph from the Bal-Hae Dynasty have been reported so far. The present paper, based on an examination of the style of the epitaphic tombstones of Princess Jeong-Hye and Princess Jeong-Hyo, investigates the historical formation and characteristics of Balhae's epitaphic style and its influences on the posterior periods. The epitaphs from the Bal-Hae Dynasty have the following epigraphic characteristics and historical significances. First, Bal-Hae's epitaphs are similar to those from the Goguryeo Dynasty in the sense that they are angular in their form. Tombstones with angular head first appeared during the East Han period. During the Wi-Jin period, however, as tombstones were not allowed to be erected in front of the tomb, small-sized epitaphic tombstones were set up inside tombs. Typical tombstones from the Dang Dynasty had stone pole and square cover. Unlike those from the Dang and the Tong-Il Silla Dynasties, however, the epitaphs from Bal-Hae had angular head in their tombstone body. The Bal-Hae's angular headed tombstones are very likely to testify that Goguryeo's epitaphs, which features an influence from the Wi-Jin Nambuk-Jo period, in turn exerted an effect on those from the Bal-Hae Dynasty. Second, Bal-Hae's epitaphic tombstones are characterized by their hexagonal head,which were modified from the then typical pentagonal head by cutting out the sharp point. The hexagonal head, which has not been found in its neighboring countries during the same historical period, is peculiar to the epitaphic tombstones from the Bal-Hae Dynasty. Third, the edge lines and ornamental figures first appeared in Bal-Hae's epitaphic tombstones, as seen in those of Princess Jeong-Hye. In the fa?ade of the epitaphic tombstone, a carved line demarcates its rectangular body and trapezoidal head. Four faces of the body stonehave two parallel lines in their edges within which vignette was inscribed, and the trapezoidal head part was ornamented with flower figures. Fourth, Bal-Hae's epitaphic tombstone had an extensive influence on the posterior countries in its neighborhood. The epitaphic tombstones in the Bal-Hae style are very often found in those of the Goryeo Dynasty and the Yo Dynasty which were greatly influenced from Bal-Hae. The vestiges of Bal-Hae's epitaphic style are also found in those from the Song, the Geum, and the Won Dynasties.

• Food Engineering Progress
• /
• v.23 no.3
• /
• pp.193-199
• /
• 2019

This study aimed to investigate the impact of protease treatments on the yield of rice starch (RST) from frozen rice flours, and to compare the physicochemical properties of RST by alkaline steeping (control) and enzymatic isolation (E-RST) methods. Although the yield of E-RST, prepared according to conditions designed by the modified 23 complete factorial design, was lower than the control, the opposite trends were observed in its purity. E-RST (RST1, isolated for 8 h at 15℃ with 0.5% protease; RST2, isolated for 24 h at 15℃ with 1.5% protease; RST3, isolated for 24 h at 15℃ with 0.5% protease) with the yields above 50% were selected. Amylose contents did not significantly differ for the control and RST2. Relative to the control, solubilities were higher for all E-RST, but swelling power did not significantly differ for E-RST except for RST1. Although all E-RST revealed higher gelatinization temperatures than the control, the reversed trends were found in the gelatinization enthalpy. The pasting viscosities of all E-RST were lower than those of the control. Consequently, the enzymatic isolation method using protease would be a more time-saving and eco-friendly way of preparing RST than the alkaline steeping method, even though its characteristics are different.