• Journal of the Korean Society of Radiology
• /
• v.12 no.5
• /
• pp.677-682
• /
• 2018

This study evaluated the usefulness of the elasticity score and elasticity ratio in the differential diagnosis of benign and malignant lesion in breast elastography. We performed a retrospective analysis based on the results of core needle biopsy histology. The Mann-Whitney U test was used to confirm the difference between the 5-degree elasticity score and the Fisher's Exact test. ROC curve analysis was used to determine the elasticity score and the best cut-off value of the elasticity ratio for the prediction of malignant lesions. There was a statistically significant difference (p= .000) between the homogeneity of the elasticity score and the difference of the elasticity ratio between the benign and malignant lesion groups. On the ROC curve analysis, the elasticity score and the elasticity ratio for predicting benign and malignant lesion were determined as AUC 0.806, 0.824, cut-off value 3, 4.4 (p= .001). Therefore, the elasticity score and elasticity ratio may be useful in the differential diagnosis of breast mass.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.12
• /
• pp.220-225
• /
• 1998

압축성 초탄성 평판의 순수굽힘에 대한 비선형 변형해석의 수학적 정해가 본 논문에 구해져 있다. 이차원 평면 변형도 상태가 해석을 위하여 가정되었으며, 비선형 순수굽힘 변형해석결과는 고전적인 선형 순수굽힘 변형해석결과와 비교되었다. 고전적인 선형굽힘 결과와는 다르게 비선형 순수굽힘 상태에서는 반경방향응력은 영이 아니며 또한 각방향응력도 선형 상태가 아닌 것으로 규명되었다.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.10
• /
• pp.193-202
• /
• 1998

본 논문에서는 비선형 고체역학 이론에 대하여 특히 시간에 무관한 변형을 하는 초탄성 및 탄소성고체물질의 비선형 변형이론에 대하여 철저한 분석을 수행하였다 특히 비선형 변형의 해석방범론에 대하여 특별한 관심을 가지고 분석하였다. 비선형 변형해석 방법론으로 널리 논의되고 있는 증분뉴튼랩슨 방법에 대하여 수정된 개념을 제시하여 비선형 변형 해석의 정 확성을 향상시켰다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.35 no.5
• /
• pp.277-286
• /
• 2022

The elastic and inelastic responses obtained from the experimental and analytical results of two RC building structures under the service level earthquake (SLE) and maximum considered earthquake (MCE) in Korea were used to weinvestigate the characteristics of the mechanisms resisting shear and torsional behavior in torsionally unbalanced structures. Equations representing the interactive effect of translational drift and torsional deformation on the shear force and torsional moment were proposed. Because there is no correlation in the behavior between elastic and inelastic forces and strains, the incremental shear forces and incremental torsional moments were analyzed in terms of their corresponding incremental drifts and incremental torsional deformations with respect to the yield, unloading, and reloading phases around the maximum edge-frame drift. In the elastic combination of the two dominant modes, the translational drift mainly contributes to the shear force, whereas the torsional deformation contributes significantly to the overall torsional moment. However, this phenomenon is mostly altered in the inelastic response such that the incremental translational drift contributes to both the incremental shear forces and incremental torsional moments. In addition, the given equation is used to account for all phenomena, such as the reduction in torsional eccentricity, degradation of torsional stiffness, and apparent energy generation in an inelastic response.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.1
• /
• pp.1-11
• /
• 2016

The information about the deformations of high-aspect-ratio wings is needed for the real-time monitoring of structural responses. Wing deformation in flight can be predicted by using relationship between the curvatures and the strains on the wing skin. It is also necessary to consider geometric nonlinearity when the large deformation of wing is occurred. The strain distribution on fixed-end is complex in the chordwise direction because of the geometric shape of fixed-wings on fuselages. Hence, the wing displacement can be diversely predicted by the location of the strain sensing lines in the chordwise direction. We conducted a study about prediction method of displacements regardless of the chordwise strain sensing locations. To correct spanwise strains, the ratio of spanwise strain to chordwise strain, Poisson's ratio, and the ratio of the plate strain to the beam strain were used. The predicted displacements using the strain correction were consistent with those calculated by the FEA and verified through the bending testing.

• Journal of the Korean Society of Radiology
• /
• v.11 no.4
• /
• pp.227-234
• /
• 2017

This study evaluated the usefulness of the elasticity score and strain ratio in the differential diagnosis of benign and malignant nodules in thyroid elastography. We performed a retrospective analysis based on the results of fine needle aspiration cytology. The Chi-square test and the Mann-Whitney U test were used to analyze the difference between the five degrees of elasticity score and strain ratio according to the benign and malignant thyroid nodules. ROC curve analysis was used to determine the elasticity score and the best cut-off value of the strain ratio for the prediction of malignant nodules. There was a statistically significant difference (p=0.000) between the homogeneity of the elasticity score and the difference of the strain ratio between the benign and malignant nodule groups. On the ROC curve analysis, the elasticity score and the srain ratio for predicting benign and malignant nodules were determined as AUC 0.842, 0.700, cut-off value 3, 2.49 (p=0.001). Therefore, the elasticity score and strain ratio may be useful in the differential diagnosis of thyroid nodules.

• Geotechnical Engineering
• /
• v.9 no.4
• /
• pp.65-82
• /
• 1993

A series of torsion shear tests were performed to study the drained stress -strain behavior of medium dense Santa Monica Beach sand under various stress paths. The torque was applied to both clockwise and counterclockwise directions at the end of hollow cylinder specimen. Two clip gages had been previously used to measure the changes in wall thickness and diameter of the specimen. In this study, however, the lateral strain was determined by measuring volume changes in specimen. Specimens were prepared by the air pluviation method and gaseous carbon deozide( CO2) was used to measure precisely volumetric strain in specimen. The drained stress -strain behavior of cohesionless Boils during rotation of principal stress directions was analysed based on the results of torsion shear tests. The coupling of mal stress were applied. It was also found from the test results that the atrial strain at failure decreased with increasing value.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.9
• /
• pp.6391-6396
• /
• 2015

In order to investigate characteristics of the von Mises yield criterion under 2 dimensional stress condition, two cases of plane strain were studied. One of which was for zero elastic strain and the other was for zero plastic strain increment. Yield functions for the plane strain condition for zero elastic strain and for the plane stress condition were represented as ellipse and the two yield functions were compared by ratios of major axis, minor axis and eccentricity and it was seen that the ratio of minor axis was the same between the two cases and the ratios of major axis and eccentricity were functions of Poisson's ratio. Region of elastic behavior obtained from considering plane strain condition of zero elastic strain increases as the Poisson's ratio increases. Yield function for plane strain obtained from considering zero plastic increment and associate flow rule was displayed as straight line and the region of elastic behavior was greater than that for the case of plane stress.

• Journal of the Korean Geotechnical Society
• /
• v.16 no.2
• /
• pp.103-113
• /
• 2000

기존의 Terzaghi 압밀이론은 상대적으로 연약토층이 두껍지 않고, 초기함수비가 낮으며 적은 유효응력의 증가가 예상되는 곳에 그 적용이 제한되어 있었다. 그 이유는 Therzaghi 압미이론 자체가 미소변형률과 선형적인 압축성 및 투수성등을 기본적인 가정사항으로 내포하고 있기 때문이다. 이러한 가정사항을 극복하고자 Gibson et al. 은 일차원 비선형 유한 변형률 압밀이론에 관한 엄밀해를 제시하였다. 이 이론은 기존의 많은 가정사항들을 극복하여 실제 현상에 더욱 부합하는 예측을 할 수 있는 장점이 있는 반면, 비선형적인 응력-변형 관계, 변형-투수계수 관계의 도입과 좌표변환 및 현장의 시고이력을 그대로 적용하는데 많은 어려움이 있는 것이 사실이다. 본 연구에서는 이러한 비선형 유한형태를 압밀이론을 이용한 압밀현상 예측을 위하여, 비선형적인 응력-변형 관계, 변형-투수계수 관계에 관한 함수식을 구성하고 이를 포함하는 컴퓨터 프로그램을 개발하였다. 개발 프로그램은 많은 폼과 모듈로 구성되어 있는데, 이러한 각각의 폼과 모듈은 GUI 기능의 극대화를 통해 복잡한 이론에 익숙하지 않은 실무자들이 쉽게 본 이론을 이용할 수 있도록 설계 되었다. 또한 개발프로그램은 다양한 하중단계 및 비선형적인 응력-변형 관계, 변형-투수계수 관계에 관한 회귀분석, 각 유효응력 단계별 상이한 비선형 계수 g와 λ를 적용할 수 있으며, 계산을 위한 전처리과정은 물론 계산된 결과를 위한 다양한 후처리과정이 모두 사용자 위주의 GUI 기능을 충분히 갖도록 설계되었다. 개발 프로그램의 검증을 위하여 실제 현장의 계측자료 및 기존 연구문헌상의 결과와 본 개발 프로그램의 예측결과를 비교.분석하였으며, 다양한 간극비 상태의 비선형 계수가 해석결과에 미치는 영향을 알아보았다.

• The Korean Journal of Food And Nutrition
• /
• v.14 no.3
• /
• pp.263-268
• /
• 2001

NaIO$_4$-산화 전분당을 Bacillus licheniformis의 $\alpha$-아밀라아제의 반응시켜서 시프염기 형성으로 당단백질로 변형시켜서 안정성을 확인하였다. 10$0^{\circ}C$에서의 열안정성은 10분 뒤에, pH 9.7에서 변형한 효소 비변형 효소의 순으로 높았다. 그러나 변형 및 안정성에 $\alpha$-cyclodextrin($\alpha$-CD)을 사용한 결과 큰 차이는 나지 않았다. pH 8.0에서 $\alpha$-CD 존재하에 변형한 효소는 pH 8~11dml 알칼리쪽에서 가장 높은 안정성을 나타냈으나, pH 5~7사이에는 다른 효소보다 낮았다. pH 9.7에서 변형하지 않은 효소는 pH 5부터 pH 13까지 서서히 증가하였고 pH 9.7에서 $\alpha$-CD존재 하의 효소는 pH 5부터 7까지 증가하다가 그 후 pH13까지 서서히 감소하였다. $\alpha$-CD존재하의 비변형 효소는 pH 7과 10에서 피크를나타낸 다음 pH12이후에는 급격히 낮아졌다. 변형한 효소는 HPLC 의 유출시간이 빨라wu서 변형하지 않은 효소보다 분자량이 큰 것으로 나타났다. 분자량 크기는 비변형 효소