• Proceedings of the Korean Fiber Society Conference
• /
• 2002.04a
• /
• pp.57-61
• /
• 2002

점탄성학은 고분자물과 같이 기계적 성질이 시간에 따라 변하는 물질의 응력과 변형해석에 관한 학문이다. 이에 대한 이전의 문헌들은 균일변형시의 조성식에 대한 주제를 주로 다룬 반면, 경계조건 문제(boundary value problem)로서의 불균일 변형해석에 대한 논의가 부족한 편이다. 본 논문에서는 불균일 변형해석에 유용한 상응원리 (correspondence theorem)[1]을 보이론(beam theory)에 적용하는 경우, 적용가능조건을 유도하는 한편 상응원리를 적용 예를 들어 설명하였다. (중략)

• Digital Contents
• /
• no.8 s.123
• /
• pp.134-138
• /
• 2003

이번 칼럼 시리즈의 첫 연재에서 상위 레벨에서 성능을 확인하고 레벨 설계와 환경과의 상호 작용이 어떤 영향을 미치는지 확인했다. 대부분의 이론으로 어느 정도는 설명되기 때문에 이 칼럼을 읽기 전에 지난 칼럼에 소개된 개념을 먼저 읽는 것이 좋다. '어떻게' 최적화 하는가를 결정하기 전에 언제 무엇을 최적화해야 하는지를 알아야 하기 때문이다. 우리는 지난해 메쉬가 변형의 경계나 삽입 경계로 사용될 수 있다는 것을 알았다. 본 고에서는 일반적인 하드웨어 파이프가 제공하는 보다 완전한 가능성 영역에 대해 살펴본다.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2006.03a
• /
• pp.600-606
• /
• 2006

실제 지반은 경계가 없는 무한상태로 존재하기 때문에 지반구조물의 동적거동을 유한요소법을 이용하여 해석할 시 모델의 영역을 성립하는 것은 특별한 고려가 필요하다. 유한요소법에서의 동적해석은 파동의 전달을 포함하기 때문에 모델의 경계에서 인공적인 경계조건이 필요하다. 인공적인 경계 조건은 유한요소내의 지반상태를 무한상태로 변형시킬 수 있어야 하며, 경계에 도달하는 응력 파동을 모델내로 반사시키지 않고 흡수 할 수 있어야 한다. 본 논문에서는 간단한 점 탄성 반무한 불연속 요소를 이용하여 지반구조물의 동적해석을 수행하는 방법을 보여준다. 반무한 요소의 실행은 OpenSees라는 유한요소 해석프로그램을 이용하여 수행되었으며, 예를 통하여 불연속 요소가 경계에 도달하는 응력 파동을 충분히 흡수하여 유한요소 모델을 반무한 상태로 전환 시킬 수 있다는 것을 보여준다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.4B
• /
• pp.725-733
• /
• 2000

In this paper, we propose a modified boundary block merging technique for the texture coding of MPEG-4. We propose an ORP(Optimized Region Partitioning) method that partition the VOP-based reference position to minimize the number of coding blocks. The merging possibility is improved by adding +90。and -90。 Rotation merging. We propose a MRM(Multiple Rotation Merging) method which applies the rotation merging in the order of 180。, +90。and -90。. If a pair of boundary blocks has low correlation, existing BBM's padding technique is not efficient. Our padding after merging method gives better result even if it has low correlation. The proposed method showed 5 ~8(%) coding bit reduction at the same PSNR values compared to BBM method.

• Journal of the Society of Naval Architects of Korea
• /
• v.39 no.3
• /
• pp.18-27
• /
• 2002

In order to improve the accuracy of the solution near the boundary in an analysis of viscous flow around an arbitrary boundary which move and be deformed using an Eulerian concept, a level-set based grid deformation method is introduced to concentrate grid points near the boundary. This paper presents a new monitor function which can easily control the level of the concentration of grid points along the boundary. Computations for steady flow around a semi-circular cylinder mounted on the bottom of the flow domain were carried out to check the improvement of the solution using the adaptive grid system with an immersed boundary method. The present numerical results show a good agreement with the solutions obtained by a body fitted grid system and more accurate solutions than those computed with non-adaptive grid system. For the validation of mechanical usefulness of the present method, an expanded analysis of flow around multi-body fixed in the flow domain was carried out. Finally, the present moving adaptive grid method was applied to a two-dimensional bubble rise problem. The computed results show well adapted grid points around the boundary of the bubble at every time and a good agreement with the result calculated by fixed grid system.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.3
• /
• pp.11-21
• /
• 2008

A linear and non-linear analysis for plates and shells with arbitrary edge supports subjected to various loading was presented. The 9-node ANS(Assumed Natural Strain) hell element was employed and the spring element, which could express an arbitrary edge support using the six degrees of freedom, was introduced. For the application of his analysis, the plates and shells with various edge supports were analyzed, and the ending behavior with these edge supports were obtained accurately. For these edge supports, particularly elastic edge support was simulated by six springs and reasonable results were obtained. The results show that the present method can be widely used to analyze the bending behavior of plates and shells with arbitrary edge conditions.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.10
• /
• pp.89-101
• /
• 1995

선형 탄성 등방성 물체 내에 있는 일반적인 복합모드 크랙 문제들을 해석하기 위한 이중 경계적분방정식의 일반식과 계산해법이 제시되었다. 크랙면이 포함된 물체 해석에 있어서 유일한 해를 얻기 위하여, 한 면상의 점에는 변위 경계적분방정식이 적용되었고 마주하고 있는 상대면 상의 점에는 인력 경계적분방정식이 적용되었다. 인력 및 변위 경계적분방정식의 강특이해 및 초특이해 적분항들은 수치해법을 적용하기 전에 정상화되었다. 정상화과정 중 보정되는 강특이적분항이 상대 크랙면 상의 특이해 요소를 따라 직접 적분되는 것을 격리시키기 위하여, 특이해 적분 경로를 완만한 곡면으로 우회시킨 가상의 비특이해 보조경계로 대치하여 적분값을 계산하였다. 제시된 해법의 정확성과 효율성을 예시하기 위하여, 2차원 및 3차원 크랙 문제의 변형 후 모습과 응력강도계수 계산 결과를 보였다.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.4 no.1
• /
• pp.10-17
• /
• 1999

The purpose of this study is to investigate the baroclinic response of the upper-layer of two-layered fluid when the lower-layer motion is driven by pumping an external fluid into the lower-layer or by pumping out the lower-layer fluid. Recent observations of the barotropic nature of deep water movements in the East Sea (fakematsu et al., 1994; KORDI, 1997) may suggest a possibility of interaction between the upper and lower layer via interface tilting. For homogeneous fluid, steady and axisymmetric source or sink causes axisymmetric geostrophic flow, and the lower-layer motion in two-layered fluid was similar to homogeneous flow. But as Rossby number (${\varepsilon}$) or internal Froude number ($f_2$) increases, the lower-layer motion was affected by the interface tilting. The interface tilting calculated based on the observed azimuthal velocities of upper- and lower-layers becomes greater as $f_2$ increases. In other words, the increase of the $f_2$ changes the barotropic system to baroclinic system.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.9
• /
• pp.1073-1080
• /
• 2012

Incremental forming is a cold working process in which a small part of the material is being deformed and the area of local deformation is moving over the entire material. In this paper, we study description schemes to perform finite element analysis for the incremental forming. The selected description schemes to examine are the Lagrangian description and the arbitrary Lagrangian-Eulerian (ALE) description. The sliding boundary scheme coupled with ALE is also examined to overcome the distortion problems of elements on the contact surface. Results show that the ALE description with the sliding boundary scheme is most favorable in overcoming the distortion of elements. This description leads to make the simulation continued to the final stage of the incremental forming. On the other hand, the Lagrangian description as well as the original ALE description makes the elements much distorted and the analysis is stopped long before arriving at the final shape of deformation.

• Korean Journal of Optics and Photonics
• /
• v.21 no.5
• /
• pp.214-223
• /
• 2010

Optimization of a 30 cm lightweight mirror was proposed with the best optical performance under various loads of gravity and thermal loads with proper boundary conditions. A pattern for a lightweight mirror was generated based on the best optical performance combined with ease of manufacturing for proper design parameters of physical properties of face sheet, back sheet, rib, and web. Evaluation of the optical performances of a telescope mirror was obtained by using the finite element analysis program, NX I-DEAS. Surface errors, individual aberration terms, such as piston, tilts, focus and other aberrations were calculated by using Zernike polynomials. The proposed telescope mirror meets well the opto-mechanical design consideration of RMS surface error less than 16 nm.