• Journal of Digital Convergence
• /
• v.17 no.12
• /
• pp.203-210
• /
• 2019

Most cars today use electronic control to control the state of the engine to achieve optimum performance. This study developed a device for maintaining fault diagnosis and optimal vehicle status by displaying the engine information of a car on the screen in real time using can communication. This system displays information generated from the engine to the driver in real time such as engine intake and exhaust temperature, current battery voltage, tire pressure, RPM, DPF collection amount, torque, and horsepower through the OBD2 socket. You can check immediately. It can help you to drive safely by measuring tire pressure and displaying it on the screen, and it provides a mode to set the shift timing to suit your taste. In particular, in the case of diesel engine cars, the problems caused by smoke can adversely affect the performance and environmental pollution. Therefore, the system was developed to display the DPF collection amount on the system screen to prevent environmental pollution and to manage the vehicle efficiently.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.11
• /
• pp.1101-1106
• /
• 2016

In this thesis, I developed a ball press pushing up equipment to solve the defect that occurs when the ball is inserted to the auto transmission. The ball press pushing up equipment is composed of heating device, thermostat which controls the heating device and the automated insertion device which helps to enhance mass production. This development contributes to quality improvement of domestic automobile production auto transmission part, and also contribute to cost reduction and sales increase for corporations.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.4 no.2
• /
• pp.12-17
• /
• 1995

The operation of heavy tracked vehicle has the problems in the steering that made by misoperations. The protection device is applied to the vehicles. But that device is applied to the vehicles. But that device has the engine stop and over load condition problems. the steering safety system is developed on the basis of clutch slip that proved the durability in the dynamo test and field test. The steering safety system caused the performance improvement of vehicles when steering.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2003.07a
• /
• pp.122-127
• /
• 2003

국내에서 사용되는 트랙터는 출력과 상관없이 쟁기 작업을 포함한 농작업, 운반작업 등이 주로 사용되는 편이나, 북미 또는 서유럽의 경우 소형 트랙터는 토목공사의 로더, 굴삭 작업 또는 잔디깍기 등의 농장 및 정원 관리용 등으로 주로 사용되며 쟁기 작업은 거의 하지 않는다. 이와 같은 목적으로 사용하는 트랙터는 견인력을 적게 요구하는 대신 잦은 변속 및 전후진의 방향 전환을 요구하므로, 기계식 트랙터로써는 많은 불편함을 느낄 수밖에 없다. HST 트랙터는 다양한 작업성을 만족시키는 동시에 조작성이 편리하다는 장점이 있다. (중략)

• 제어로봇시스템학회:학술대회논문집
• /
• 1987.10b
• /
• pp.218-222
• /
• 1987

The continuously variable transmission (C.V.T.) has been introduced for many years, however, the application of C.V.T. system has been used rather restrictively because of the problems such as reliability, durability, efficiency and, controllability. In this paper, some of the research trends about the control algorithms and the system design method involving C.V.T. is introduced. An engine is assumed in operation along the ideal operating line and it is also considered to be controlled independently to the C.V.T. system. The control simulation has been carried out to confirm it and also the operation performance of the system is investigated.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.24 no.1
• /
• pp.54-61
• /
• 2014

This paper proposes a driver supportive device with haptic cue function which can transmit optimal gear shifting timing to a driver without requiring the driver's visual attention. Its performance is evaluated under vehicle model considering automotive engine, transmission and vehicle body. In order to achieve this goal, a torque feedback device is devised and manufactured by adopting the MR (magnetorheological) fluid and clutch mechanism. The manufactured MR clutch is then integrated with the accelerator pedal to construct the proposed haptic cue device. A virtual vehicle emulating a four-cylinder four-stroke engine, manual transmission system of a passenger vehicle and vehicle body is constructed and communicated with the manufactured haptic cue device. Control performances including torque tracking and fuel efficiency are experimentally evaluated via a simple feed-forward control algorithm.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.19 no.5
• /
• pp.516-522
• /
• 2009

This paper proposes a new haptic cue vehicle accelerator pedal device using magnetorheological(MR) brake. As a first step, an MR fluid-based haptic cue device is devised to be capable of rotary motion of accelerator pedal. Under consideration of spatial limitation, design parameters are optimally determined to maximize control torque using finite element method. The proposed haptic cue device is then manufactured and integrated with accelerator pedal. Its field-dependant torque is experimentally evaluated. Vehicle system emulating gear shifting and engine speed is constructed in virtual environment and communicated with the haptic cue device. Haptic cue algorithm using the feed-forward control algorithm is formulated to achieve optimal gear shifting in driving. Control performances are experimentally evaluated via feed-forward control strategy and presented in time domain.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.04a
• /
• pp.627-632
• /
• 2009

This paper proposes a new haptic cue vehicle accelerator pedal device using magnetorheological (MR) brake. As a first step, an MR fluid-based haptic cue device is devised to be capable of rotary motion of accelerator pedal. Under consideration of spatial limitation, design parameters are optimally determined to maximize control torque using finite element method. The proposed haptic cue device is then manufactured and integrated with accelerator pedal. Its field-dependant torque is experimentally evaluated. Vehicle system emulating gear shifting and engine speed is constructed in virtual environment and communicated with the haptic cue device. Haptic cue algorithm using the feed-forward control algorithm is formulated to achieve optimal gear shifting in driving. Control performances are experimentally evaluated via feed-forward control strategy and presented in time domain.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.14 no.1
• /
• pp.66-72
• /
• 2005

The working tactor of this study, an agriculture machine, is consisted of 4 wheel driving system with gear trains and 4-type wheel steering system. Since technological regions for 4 wheel driving system and 4-type wheel steering system are some large, we divide on two studies on 4 wheel driving system and 4-type wheel steering system This study develops transmission and axle that are very important units for strong working operation because the power of tractor is largely affected by transmission and axle. Even if the development of the power train is some common technology, it is very complicated work and needs many experience know-hows. So, for new given specifications fitted to the working tractor, a kind of new agriculture machine, this study haws out processes that are development of assembly drawing and strength analysis through classical method and CAE software for all internal parts and housing cases.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.105-106
• /
• 2015

무인 자율 자동차는 사람이 차량 제어에 개입할 수 있는 일반적인 '무인 자동차'와는 달리 센서, 메라와 같은 '장애물 인식장치'와 GPS모듈 과 같은 '자동 항법 장치'를 기반으로 조향, 변속, 가속, 브레이크를 도로환경에 맞춰 스스로 제어해 목적지까지 주행할 수 있는 차량을 의미한다. 따라서 무인 자율 주행 자동차에는 차량제어기술, 차선인식기술, 충돌 회피 기술 등이 필요 하며 이를 위해 각종 센서뿐만 아니라 센서 네트워크, 컴퓨터비전, 인공지능 등의 다양한 기술들이 접목되어야 한다. 본 논문은 소형 무인자동차의 제작을 통한 알고리즘과 그 평가에 대해서 나타낼 것이다.