• Journal of the Microelectronics and Packaging Society
• /
• v.28 no.3
• /
• pp.17-24
• /
• 2021

Perovskite solar cells (PSCs) can be fabricated through solution process economically with variable bandgap that is controlled by composition of precursor solution. Tandem cells in which PSCs combined with silicon solar cells have potential to reach high power conversion efficiency over 30%, however, lack of long-term stability of PSCs is an obstacle to commercialization. Degradation of PSCs is mainly attributed to the mass transport of halide and metal electrode materials. In order to ensure the long-term stability, the mass transport should be inhibited. In this study, we confirmed degradation behaviors due to the mass transport in PSCs and designed buffer layers with LiF and/or SnO₂ to improve the long-term stability by suppressing the mass transport. Under high-temperature storage test at 85℃, PSCs without the buffer layers were degraded by forming PbI₂, AgI, and the delta phase of the perovskite material, while PSCs with the buffer layers showed improved stability with keeping the original phase of the perovskite. When the LiF buffer and encapsulation were applied to PSCs, superior long-term stability on 85℃-85% RH dump heat test was achieved; efficiency drop was not observed after 200 h. It was also confirmed that 90.6% of the initial efficiency was maintained after 200 hours of maximum power tracking test under AM 1.5G-1SUN illumination. Here, we have demonstrated that the buffer layer is essential to achieve long-term stability of PSCs.

• Korean Journal of Heritage: History & Science
• /
• v.52 no.3
• /
• pp.188-199
• /
• 2019

In this study, research trends were investigated by examining important academic research on museum lighting that has been carried out in Korea over the past 30 years. The aim was to highlight important studies conducted in Korea on material deterioration caused by museum lighting and to examine the current status of research on LED light sources to provide direction for future research. The ultimate goal of studies on museum lighting is to improve the long-term conservation effects, and this study examined the latest light sources of each era. Prior to the 1990s, the effects of light sources on relics were assessed by investigating incandescent light bulbs and fluorescent lamps, the first museum exhibition lighting. Then in the 1990s, the introduction of halogen lamps and HID lamps led to the analysis of the characteristics of a light source itself and the introduction of illumination standards. In the 2000s, the lighting environment of museums was investigated based on the characteristics of the light sources that had been studied, and in terms of preservation, research was conducted not only to improve the conservation of relics but also to improve the sentiments of visitors. After 2010, LED lamps were introduced; therefore, material deterioration studies on LED lamps were expanded. During this period, enhancements to LED light sources were made, such as reducing the blue spike area and increasing color rendering. With the development of lighting used in museums and art galleries, the direction of the display preservation criteria has led to the need to prepare advanced standards, covering all aspects from the center of illumination to the consideration of the color of an object and the speed of radiation from the light source. Regular studies of museum lighting in a long-term perspective should be planned to standardize the more advanced conditions of material discoloration.

• Journal of the Korean Geotechnical Society
• /
• v.37 no.2
• /
• pp.5-17
• /
• 2021

The Moon has been an attractive planet as an outpost for deep space exploration since He-3 and water ice which can be used as energy resources were discovered. In-Situ Resource Utilization (ISRU) construction material fabrication method is required for sustainable space planet exploration. In this paper, the possibility of microwave sintering technology for construction material fabrication was evaluated using lunar regolith that can be easily collected from the Moon surface. Experimental assessment of the influence factors on microwave sintering was conducted using a hybrid sintering system for efficient processing. The heat distribution in the furnace was observed using thermal paper that is coated with a material formulated to change color when exposed to heat. Based on this result, sintered cylindrical KLS-1s with a diameter of 1 cm and a height of 2 cm were fabricated. Densities were measured for the sintered KLS-1s under rotating turntable conditions that have an effect of microwave dispersion. The more dielectrics were arranged, the more microwaves were dispersed reducing the heat concentration, and thus a uniformity of sintered KLS-1s was enhanced.

• Journal of Mushroom
• /
• v.18 no.4
• /
• pp.339-343
• /
• 2020

This study aimed to optimize total nitrogen (TN) content in the medium and the growth temperature to improve the shelf life of Pleurotus eryngii Keneutari No. 2. We investigated the growth characteristics and changes in the O2/CO2 content in polypropylene film and performed sensory evaluations during cold storage under 1.5%, 1.8%, 2.1%, and 2.4% TN and at temperatures of 9℃, 12℃, and 15℃. The diameter and weight of the fruit bodies tended to increase with increasing nitrogen content, regardless of the growth temperature, and the highest weight per bottle (149.5 g) was obtained at 12℃ and 2.4% TN. Regardless of the nitrogen content, leaf color deepened with decreasing temperature. The gas concentration in the film, which changes depending on storage time, was maintained for the longest period at 9℃ and 2.1% TN. The sensory evaluation revealed no difference between the different nitrogen conditions tested, and the odor, discoloration, and decay were similar at 15℃ and 9℃ until day 28 of storage.

• Journal of Chest Surgery
• /
• v.38 no.8 s.253
• /
• pp.557-563
• /
• 2005

Background: Recently 980-nm diode laser endovenous treatment was introduced and used as a method of treatment for varicose vein in lower extremities. The advantages of endovenous laser treatment are good cosmetic effects without incision and avoidance of complications associated with surgery. Therefore, we performed an endovenous laser treatment using a 980-nm diode laser and observed the effects and the efficiency of treatment. Material and Method: From October, 2003 to March, 2004, 55 patients (84 limbs) underwent endovenous laser treatment with a 980-nm diode laser. The effects of treatment, complications and recurrences were reviewed. Result The mean age of patients was 47.2 years old and the number of men and women were 2f and 35. In a total of 84 limbs, postoperative complications were transient ecchymosis(84 cases), local paresthesia (24 cases), local skin discolorization (6 cases), minimal burn (3 cases), and post operative phlebitis (1 cases). Adjuvant sclerotherapy was performed in 27 limbs and it was performed in varicose veins missed at operation and varicose veins remaining after endovenous laser treatment. In a total of 56 patients, 2 patients $(3.57\%)$ had recurrences after endovenous laser treatment and were treated with phlebectomy. Conclusion: Our findings demonstrated that 980-nm endovenous laser treatment had good cosmetic results with acceptable complications. This study was based on short-term results and long term follow-up is necessary to evaluate the accurate effects of treatment and recurrence. We think that multimodality treatment with endovenous laser treatment including phlebectomy or transilluminated powered phlebectomy can help decreasing of recurrence especially in patients with tortuous varicose cluster.

• Food Science and Preservation
• /
• v.16 no.2
• /
• pp.179-185
• /
• 2009

To develop an Enoki mushroom packaging method, mushrooms were stored at $1^{\circ}C$ for 12 days after passive MAP packaging(PM), vacuum packaging(VM), and gas flushing packaging(AM), after investigation of film thickness influences on respiration rates and gas compositions(LDPE films 20, 40, and 60 m in thickness were tested). Enoki mushrooms had respiration rates of 26.4 mL $CO_2/kg/hour$ at $0^{\circ}C$, 80.0 mL $CO_2/kg/hour$ at $10^{\circ}C$, 130.9 mL $CO_2/kg/hour$ at $20^{\circ}C$, and 130.9 mL $CO_2/kg/hour$ at $30^{\circ}C$. A film thickness of 20 m was chosen for further tests to maintain the oxygen concentration above the minimum growth level; the thinnest film offered a higher gas transmittance rate than did the thicker films. No anaerobic respiration was evident over 12 days of storage using any packaging method, with the exception of VM. AM, using a high concentration of $CO_2$, restricted respiration rate. Mushrooms packaged using the VM method showed the greatest weight loss and extent of discoloration among the packaging methods tested, followed by AM mushrooms using 50% $CO_2/10%\;O_2/40%\;N_2$. Mushrooms packaged by the VM and PM methods developed a serious off-flavor after 2 days of storage, and a high stipe elongation rate after 5 days of storage, respectively. However, AM using 50% $CO_2/10%\;O_2/40%\;N_2$ of various gas ratios tested, allowed Enoki mushrooms to be maintained for up to 12 days without development of off-flavor, discoloration, or moldiness.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.35 no.4
• /
• pp.301-307
• /
• 2009

In the previous study, we evaluated and reported about the anti-oxidative activities of extract/fraction of Castanea crenata leaf. Extract/fraction of Castanea crenata leaf showed excellent free radical scavenging activity, cell protective activity and inhibitory activity on tyrosinase and elastase. In this study, in order to investigate the stability of cream containing 0.2 % Castanea crenata ethyl acetate fraction. pH, viscosity, and absorbance were measured under 4 different temperature ($4^{\circ}C$, $20^{\circ}C$, $37^{\circ}C$, $45^{\circ}C)$ and under the sun light at 2 weeks intervals for the 8 weeks. The variations on pH and viscosity of all experimental creams were similar to control cream. The absorbance variation of extract from experimental cream at 353 nm was in the order: under the sun > $45^{\circ}C$ > $37^{\circ}C$ > $20^{\circ}C$ > $4^{\circ}C$. It shows that ethyl acetate fraction in the cream can be oxidized under the sun. The bad smell and discoloration were not shown. Also, physical changes as creaming and cohesion were not shown. Also, transepidermal water loss (TEWL) and water contents in skin were measured. The cream containing Castanea cranata leaf extract was applied to the right lower arm. After 120 min, TEWL of parts was decreased as 29.7 % (experimental cream) and 5.4 % (control cream) respectively. And the water contents in skin were increased 22.6 % (experimental cream) and 24.7 % (control cream) respectively. It was confirmed that a cream containing ethyl acetate fraction of Castanea crenata leaf shows the superior moisturizing effect. The results showed that Castanea crenata leaf extract could be used as a new active ingredient for anti-aging cosmeceuticals.

• Microbiology and Biotechnology Letters
• /
• v.40 no.3
• /
• pp.237-242
• /
• 2012

In this study, the skin moisturing effect and stability of cream containing L. cuneata G. Don extract (ethyl acetate fraction) were evaluated. The skin hydrating effect of the cream containing extract was 1020% higher than the placebo cream, and the TWEL of the cream containing extracts was decreased to $7.7g/m^2h$ compared to the control ($10.2g/m^2$) and placebo cream ($8.9g/m^2$). The pH, viscosity, and absorbance were measured under the 4, 25, 37, $45^{\circ}C$ and the sun light during the 12 weeks. The pH change between cream containing extract and placebo cream did not show the significant difference under the 4, 25, 37, $45^{\circ}C$ except for the sun light. Both creams showed high decrease (about 59%) of viscosity at $45^{\circ}C$. However, there was no significant change under other conditions. The absorbance of the cream containing the extract and the placebo cream was decreased similarly at all conditions. This decrease in absorbance was relatively small compared to the decrease of absorbance of the extract in ethanol solution under the sun light (Fig. 7). In addition, any change in color or smell of the cream was not observed during the 12 weeks. Also physical changes as creaming and cohesion were not shown. These results indicate that the cream containing L. cuneata extract has the skin moisturizing effect and is relatively stable. Therefore, it is suggested that the ethyl acetate fraction of L. cuneata extract could be applicable to cosmetics as a new cosmetic material with its antioxidative and antibacterial activities reported previously.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.24 no.3
• /
• pp.21-25
• /
• 1979

To evaluate the possibility of hardening of rice seedlings to chilling injury by low temperature conditioning for improvement of nursery temperature management a chilling sensitive new variety Tongil from Indica \times Japonica cross and a chilling tolerant Japonica variety Jinheung were reared by the 3rd leaf-stage in a day $30^{\circ}C/night\; 20^{\circ}C$ growth chamber, and were subjected to temperature conditioning for hardening against chilling injury for 6 days. Then the seedlings conditioned and unconditioned were chilled in a day and night $8^{\circ}C$ chamber for 2, 4, 6, or 8 days long and returned to the day and night $30^{\circ}C/night\; 20^{\circ}C$ condition for development of chilling injuries. Survival rate after chilling injury development of the variety Tongil showed distinct effect of hardening, i. e. the unhardened-25 % survival, the hardened by a gradual drop of temperature regime $(30^{\circ}C/20^{\circ}C\rightarrow24^{\circ}C/14^{\circ}C\rightarrow18^{\circ}C/12^{\circ}C\rightarrow8^{\circ}C)4 -59% survival and the hardened. by repeated brief exposure (4hrs. to 6hrs.) to $8^{\circ}C$ shock-89% survival against chilling of $8^{\circ}C$ for 4 days long. The variety Jinheung survived even against 8 days chilling at $8^{\circ}C$ C, but the discoloration rate of leaves due to chilling showed noticeably the hardening effect as repeated shock was much better than the gradually lowering temperatures.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.32 no.2
• /
• pp.201-207
• /
• 1987

This experiment was conducted to identify the superior corn hybrids for silage production and to determine the combining ability of their parental inbred lines. A 7-entry diallel cross was evaluated for grain and stover yields, and agronomic characters under 3 different seasons. Hybrids Hi34 x Tx601, Hi26 x Hi34, and Hi29 x Hi34 showed high total dry matter yields. In general, late maturing hybrids had higher grain and silage yields than early maturing hybrids. Leaf area index was correlated with grain and stover yields. Rust rating was negatively correlated with yields and all characters, indicating that rust (Puccinia sorghi) was one of the major factors affecting yields. Diallel analysis showed that inbred Hi34 which was late in maturity and resistant to rust was the best combiner for both grain and silage yields. General combining ability (GCA) and specific com-bining ability (SCA) effects for yields and other characters were significant, suggesting that both additive and non-additive gene effects are involved for those characters. Ratio of GCA/SCA mean squares showed that GCA effects were more important than SCA effects for yields and other characters. GCA x season and SCA x season interactions were significant for grain and stover yields, revealing that gene effects were not stable for those yields under dissimilar environments.