• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.758-760
• /
• 2007

Organic field-effect transistors (OFETs) are of interest for use in widely area electronic applications. We fabricated a copper phthalocyanine (CuPc) based field-effect transistor with different metal electrode. So we need the effect of the substituent group attached to the phthalocyanine on the surface potential was investigated by Kelvin probe method with varying temperature of the substrate. We were obtained the positive shift of the surface potential for CuPc thin film. We observed the electron displacement at the interface between Au electrode and CuPc layer and we were confirmed by the surface potential measurement.

• Progress in Superconductivity
• /
• v.12 no.1
• /
• pp.6-11
• /
• 2010

The milling effects of a precursor $Y_2BaCuO_5$ (Y211) powder having 1 wt.% $CeO_2$ on the microstructure and critical current density ($J_c$) of liquid infiltration growth (LIG) processed $YBa_2Cu_3O_{7-y}$ (Y-123) bulk superconductors were investigated. The microstructure analysis revealed that the Y211 size in the final Y-123 products decreased with increasing the milling time and a relatively high density and uniform distribution of Y211 inclusions were observed in the sample prepared using 8 h milled powder. However, the unexpected Y211 particles coarsening was observed from the 4 h milled sample which was further increased for 10 h milled sample. Critical current density ($J_c$) of the LIG processed Y-123 bulk superconductors was found to be dependent on the milling time of the Y211 precursor powder. The $J_c$ increased with the increase of milling time and reached up to a maximum at 8 h in the self field while 10 h milled sample showed lower $J_c$ at the same field which might be due to the exaggerated growth and non-uniform distribution of Y211 particles.

• Applied Chemistry for Engineering
• /
• v.7 no.4
• /
• pp.691-697
• /
• 1996

The NR films were prepared with mixing of natural rubber latex(NRL) with various additives, and NR/CR films were prepared by blend ratio of chloroprene rubber latex(CRL). The swelling degree and the mechanical properties of these films were measured according to the procure time. As a result, optimum condition were showed the swelling degree : 80~85%, precure time : 48~60hrs., and tensile strength was reduced but elongation was increased as increasing the blend ratio of CRL. On the mechanical properties of films prepared by different dipping process in these optimum condition, the tensile strength and tear strength of NR/CR films by one dipping process are better than NR-d-CR films by two dipping process. The surface of these films were observed with scanning electron microscopy(SEM). It was found that phase separation was occured as increasing the blend ratio of CRL.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.231-231
• /
• 2008

최근 인터넷의 보급과 함께 고화질 및 양방향 TV, VOD 방송, 화상 전화 등의 멀티미디어 시대가 열리면서 초고속 통신 시스템에 대한 관심이 증가되고 있다. 특히 화상이나 동영상 같은 대량의 정보가 졸은 품질 및 빠른 속도로 전달될 수 있는 통신 시스템의 필요성이 대두됨에 따라 가장 효율적인 고속 전송 수단으로 광통신이 이용되고 있으며 그에 따른 광통신 능 수동 소자 개발에 관한 연구도 활발히 이루어지고 있다. 이러한 광통신 소자 중 원하는 빛을 선택적으로 투과하고 반사할 수 있는 flat-band pass(FP) filter의 역할이 중요한 부분을 차지하고 있다. 본 논문에서는 IR 영역에서 투과성이 우수한 칼코게나이드 물질을 이용해 l 차원 광자결정구조의 FP-filter를 설계, 제작하고 그에 대한 특성을 평가하였다. 시료는 5N의 순도를 갖는 As, Se, Te 물질을 준비하고 $As_xSe_yTe_z$를 조성비에 맞추어서 석영관에 진공 봉입한 후 용융 혼합하여 $As_{33}Se_{67}$과 $As_{40}Se_{25}Te_{35}$ 조성의 두 가지 비정질 벌크를 제작하였다. 제작된 시료의 굴절률은 ellipsometer을 사용하여 측정하였고, 본 연구진이 자체 개발한 계산툴에 따라 다중층막 구조를 설계하였다. 열 증착법을 이용하여 설계된 구조에 맞게 기판에 올리는 방법으로 1차원 광자결정 구조의 다중층막 샘플을 제작하였고 UV-Vis-IR Spectroscopy를 사용하여 반사도와 투과도를 측정하였다. 광통신용 L/C 밴드 주파수 범위에서 투과성이 우수한 칼코게나이드 박막의 1차원 광자결정 구조는 FP-filter등의 소자로써 유용하게 사용될 수 있다.

• Journal of the Korean Magnetics Society
• /
• v.9 no.5
• /
• pp.239-244
• /
• 1999

Bi-doped lanthanum magnetics $(La_{0.67-x}Bi_xCa_{0.33}MnO_3(x\;=\;0,\; 0.04,\; 0.1,\; 0.2))$ samples have been prepared by standard ceramic process. The crystallinity and microstructures of the samples have been investigated by x-ray diffractometry and optical microscopy, respectively. The magnetic and magnetoresistive properties of the samples have been measured by vibrating sample magnetometery and van der Pauw method, respectively, at the temperatures ranging of 100 K~300 K with applied magnetic field of 0.4~0.5 T. Good crystallinity and high Curie temperature (275 K) have been obtained for the Bi-doped samples with small dosage (x = 0.04, 0.1) even they were sintered at 120$0^{\circ}C$, which is about 20$0^{\circ}C$ lower than normal sintering temperature of 140$0^{\circ}C$. The Bi-doped samples with the small dosage showed lower relative electrical resistivity and higher magneto-resistive ratio compared to the undoped sample in the most temperatures measured. The Bi-doped samples also exhibited large magnetoresisitve ratio (maximum of 15% for x = 0.1) at room temperature even under a weak magnetic field of 0.4 T.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.550-550
• /
• 2007

Inkjet printed silver films were fabricated using nano particles with the size of ~ 20 nm. We can obtain very good conducting silver films with the resistivity of $7.3\;{\mu}{\Omega}{\cdot}cm$ even though they were sintered at the very low temperature of $200^{\circ}C$. The electrical and mechanical properties of inkjet printed silver lines were measured with the sintering time and analyzed with the micro-structural development. The measured resistivity of inkjet printed Ag films were $57.4\;{\sim}\;7.3\;{\mu}{\Omega}{\cdot}cm$. And their hardness and Young's modulus were 0.98 ~ 1.72 GPa and 32 ~ 71 GPa, respectively.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.387-387
• /
• 2007

기능성 나노소자를 구현할 수 있는 나노 소재로 0차원 구조의 양자점(quantum dot)과 1차원 구조의 양자선 및 나노선(nanorod)이 제안되고 있다. 나노선의 경우 나노스케일의 dimension, 앙자 제한 효과, 탁월한 결정성, self-assembly, internal stress등 기존의 벌크형 소재에서 발견할 수 없는 새로운 기능성이 나타나고 있어서 바이오, 에너지, 구조, 전자, 센서 등의 분야에서 활용되고 있다. 현재 국내외적으로 널리 연구되고 있는 나노선으로는 Si 및 Ge, $SnO_2$, SiC, ZnO 등이 있으며 특히, ZnO는 우수한 물리적 전기적 특성과 함께 나노선으로의 합성이 비교적 쉬워 주목받고 있는 재료이다. ZnO의 합성방법으로는 thermal CVD, MOCVD, PLD, wet-chemistry 등 다양한 방법이 사용되고 있다. 특히 MOCVD 법은 수직 정렬된 ZnO 나노막대를 합성하기가 매우 용이하다. 본 실험에서는 자체개발된 MOCVD 장비를 이용한 일차원 ZnO 나노선을 성장하였다. 이러한 ZnO 나노선의 성장은 사파이어 기판과 실리콘 기판 위에서 이루어졌으며 기판의 종류와 격자상수 불일도에 따른 상이한 성장과정을 온도에 따른 나노선 성장에서 관찰할 수 있었다. 사파이어 기판의 경우, 240도의 온도에서는 박막형상을 지닌 ZnO가 온도가 320도 이상으로 상승하면서 나노선으로 변함을 보였고, 실리콘 기판의 경우 380도 이상에서 기울기률 가진 나노선을 관찰하였으며, 420도에서는 나노선을 관찰 할 수 없었다. 또한 PL 장비를 이용한 PL 강도와 성장과정을 연관하여 생각하였을 때, 나노선의 기물기가 PL 강도비과 연관성을 가진다는 것을 측정을 통해 확인하였다.

• Progress in Superconductivity
• /
• v.14 no.1
• /
• pp.39-44
• /
• 2012

The fabrications condition and superconducting properties of top-seeded melt growth (TSMG) processed $GdBa_2Cu_3O_{7-y}$ (Gd123) bulk superconductors were studied. Processing parameters (a maximum temperature ($T_{max}$), a temperature for crystal growth ($T_G$) and a cooling rate ($R_G$) through a peritectic temperature ($T_P$) for the fabrication of single grain Gd123 superconductors were optimized. The magnetic levitation forces, trapped magnetic fields, superconducting transition temperature ($T_c$) and critical current density ($J_c$) of the Gd123 bulks superconductors were estimated. Single grain Gd123 bulk superconductors were successfully fabricated at the optimized processing condition. The $T_c$ of a TSMG processed Gd123 sample was 92.5 K and the $J_c$ at 77 K and 0 T was approximately $50kA/cm^2$. The trapped magnetic field contour and magnetic levitation forces were dependent on the top surface morphology of TSMG processed Gd123 samples. The single grain Gd123 samples, field-cooled at 77 K using a Nd-B-Fe permanent magnet with 5.27 kG and 30 mm dia., showed the trapped magnetic field contour of a single grain with a maximum of 4 kG at the sample center. The maximum magnetic levitation forces of the single grain Gd123 sample, field-cooled or zero field-cooled, were 40 N and 107 N, respectively.

• Polymer(Korea)
• /
• v.28 no.4
• /
• pp.335-343
• /
• 2004

Carmustine (l,3-bis(2-chloroethyI)-1-nitrosourea, BICNU) used as antineoplastic drug for the treatment of brain tumor is not appropriate for the long term delivery, because it has short biological half life. Therefore, poly(D,L-lactide-co-glycolide) (PLGA) is useful as drug carrier for the long term delivery due to bulk erosion property. Glycolide monomer is applied to release of BICNU owing to non-toxic and monomeric components after biodegradation of PLGA. In this study, BICNU-loaded PLGA wafers with or without glycolide monomer were fabricated by conventional direct compression method for the sustained release of BICNU. These wafers were observed for their release profiles of BICNU and degradation rates by SEM, NMR, and GPC. Furthermore, we make multi-layer wafers and compare them with release profiles of conventional wafer. From these results, drug release of BICNU-loaded PLGA wafers was increased with increasing the glycolid monomer contents. We confirmed that glycolide monomer and BICNU contents in barrier-layer influenced the drug release profiles and degradation rate.

• Korean Chemical Engineering Research
• /
• v.57 no.1
• /
• pp.105-110
• /
• 2019

Effect of height on the size and shape of carbon nanotube (CNT) aggregates in the freeboard region of a bubbling fluidized bed ($0.15m\;i.d.{\times}2.6m\;high$) has been determined. Feret diameter and Heywood diameter of the CNT aggregates in the freeboard region of fluidized bed increased with increasing gas velocity. The average aggregate diameters and CNT particle number in the aggregates decreased with increasing of height in the freeboard. Aspect ratio increased as the location was closer to the surface of the dense phase, but decreased at the highest location. Solidity did not show any significant changes with height. The results showed the aggregates formation process is affected by the height in the freeboard. A correlation was proposed to predict the Heywood diameter of the CNT aggregates.