• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.7
• /
• pp.635-641
• /
• 2016

In order to drive a hybrid propulsion device which combines an engine and an electric propulsion unit, battery packs that contain dozens of unit cells consisting of a lithium-based battery are used to maintain the power source. Therefore, it is necessary to more strictly manage a number of battery cells at any given time. In order to manage battery cells, generally voltage, current, and temperature data under load condition are monitored from a personal computer. Other important elements required to analyze the condition of the battery are the internal resistances that are used to judge its state-of-health (SOH) and the open-circuit voltage (OCV) that is used to check the battery charging state. However, in principle, the internal resistances cannot be measured during operation because the parallel equivalent circuit is composed of internal loss resistances and capacitance. In most energy storage systems, battery management system (BMS) operations are carried out by using data such as voltage, current, and temperature. However, during operation, in the case of unexpected battery cell failure, the output voltage of the power supply can be changed and propulsion of the hybrid vehicle and vessel can be difficult. This paper covers the implementation of a high safety battery management system (HSBMS) that can estimate the OCV while the device is being driven. If a battery cell fails unexpectedly, a DC power supply with lithium iron phosphate can keep providing the load with a constant output voltage using the remainder of the batteries, and it is also possible to estimate the internal resistance.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.914-915
• /
• 2011

최근 지구온난화의 문제점으로 저 탄소 친환경 자동차로 배터리 전력과 가솔린 엔진을 같이 사용하는 하이브리드 자동차가 주목 받고 있다. 최근에 개발되고 있는 하이브리드 자동차는 전력의 효율적인 사용을 위해 배터리의 전압이 증가되고 있고 이에 따라 DC High Voltage를 다룰 수 있는 Relay의 용량이 요구된다. 이런 측면에서 하이브리드 자동차에 사용되는 EV-Relay의 경우 소형화에 따른 문제점이 발생한다. 그 대표적인 문제점으로 EV-Relay의 접점에 일시적인 과전류가 흐르면서 전기적 반발력이 발생하여 EV-Relay의 폭발과 같은 위험한 문제점이 발생 할 수 있다. 이에 따라 본 논문에서는 Relay에서 발생하는 전기반발력의 힘을 MAXWELL프로그램을 통해 모의하는 연구를 하였다.

• Journal of Energy Engineering
• /
• v.19 no.1
• /
• pp.39-50
• /
• 2010

Hybrid Electric Vehicle(HEV) and Plug-in Hybrid Electric Vehicle(PHEV) will replace Conventional Gasolene Engine Vehicle at a rapid rate to eliminate emission gases and improve fuel economy. This review describes Fuzzy Logic Control strategy and Optimization for Parallel Hybrid Electric Vehicle. Recent progress on Electric Motor and Li-ion Battery for HEV and PHEV are given. Analysis on competitiveness of Korean HEV and PHEV technology based on the number of papers published and patents registered are also performed.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.6
• /
• pp.883-889
• /
• 2021

The South Korean fishing industry is experiencing a rapid growth owing to an increase in its leisure-fishing population. Consequently, fishing boats weighing 9-10 [ton] have also been increasing. Current fishing boats operate their essential equipment by switching their engines with batteries to reduce the cost of gas and engine noise. However, stranding incidents have been increasingly recorded annually, in which boats fail to start owing to discharged batteries, and these incidents can lead to serious casualties. This study proposes the installation of a solar auxiliary power system to safeguard fishing boats, particularly those weighing between 9-10 [ton]. The feasibility of securing space for the solar auxiliary power of boats under consideration was verified. To examine the application of solar power, this study calculates the load necessary to operate it for fishing and models such a system using an electricity analysis program The modeled system, which applies the monthly horizontal solar insolation, validated the adoption of a solar auxiliary power in fishing boats.

• Transactions of the Korean hydrogen and new energy society
• /
• v.22 no.4
• /
• pp.512-519
• /
• 2011

Current rechargeable battery cannot provide high energy density and the operational durations required. But linear engine/generators provide high energy density for portable power applications because fuel is more high density. In this paper, we suggest that basic design of powerpack using linear engine for assisting power output. Efficiency is relatively high because linear engine don't have crank mechanism compared with rotary engine. We made prototype engine and had experiments to know moving characteristic about the Linear Engine. It was possible to operate velocity at 50 Hz at the firing and pressure in cylinder was 16bar.

• Journal of the KSME
• /
• v.35 no.10
• /
• pp.924-932
• /
• 1995

국제 환경규제가 강화되어짐에 따라 초저공해 자동차인 ULEV 및 무공해 자동차인 ZEV의 개 발을 필수적이다. 캘리포니아주법규에 따르면 Maker의 NMOG(non meth-ane organic gas) 평 균치를 만족한다 하더라도 ZEV의 판매는 의무화되어 있다. 1989-1993 MY 기간중 연평균 판매 대수가 35,000대 이상인 Mater는 1998년 2% 적용대상이 되며, 2003년부터는 연간 3,000대 이상 판매되는 모든 Maker에 ZEV 10%가 적용된다. 이와 관련 2003년 이후 하이브리드 전기자동차 및 전기자동차의 개발은 나머지 75%(ULEV를 포함할 경우 25%)의 IC엔진이 탑재된 자동차를 판매하기 위해서 이루어지지 않으면 안되게 되어 있다. 하이브리드 자동차는 전기자동차와는 달리 주행거리에 제한을 받지 않으며, 엔진의 효율이 가장 좋은 RPM에서 발전기를 회전시킴으 로써 생성된 에너지를 배터리에 충전, 도심지에서 전기자동차 모드(mode)로 주행하기 때문에 대도시의 대기오염을 줄일 수 있고, 소음이 극히 적기 때문에 미래의 도시형 자동차로서 각광 받을 수 있는 자동차로 생각된다.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1136-1137
• /
• 2007

현재 건설기계에 있어서 연비 절감에 대하여 유압 기기나 엔진의 에너지 손실 저감에 대한 대책이 있었으나 이것만으로는 한계가 있어 대폭적인 방안을 모색하는데 있어서 동력 시스템의 재검토가 필요한 시점이다. 더불어 자동차와 마찬가지로 건설기계에서도 배기가스 저감이나 연비 저감은 매우 중요한 과제이다. 그 해결책으로서 현재 자동차에서 개발된 하이브리드 시스템의 적용이 매우 유용하다 할 수 있다. 따라서 본 논문에서는 하이브리드 동력 시스템을 건설기계에 적용한 내용을 소개하고 있다. 건설기계의 하이브리드 동력 시스템을 구성하는 엔진, 발전기, 모터, 배터리, 커패시터 등의 전력전자 기기와 전동 유압을 구성하는 전동 유압 기기를 모델화 하여 하이브리드 동력 시스템을 적용한 건설기계의 기본적인 구조와 제어 성능을 파악하고 방식별 하이브리드 시스템의 성능을 비교하였다.

• Proceedings of the KIPE Conference
• /
• 1999.07a
• /
• pp.423-426
• /
• 1999

This paper describes a driving scheme of the series hybrid electric vehicle that we have developed. Both series HEV and parallel HEV are well known. We chose series HEV because it provides good energy efficiency in urban driving and operates in all-electric mode in performance. And engine-Generator is driven at constant speed with constant load to maintain the low emission. And the battery supplies power during high-load and receive energy during low-load

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.7
• /
• pp.945-952
• /
• 2019

The International Maritime Organization (IMO) adopted the International Convention on the Control of Ships' Air Pollutants and Discharge as it became interested in environmental issues such as global warming and air pollution. In addition, a special bill on the improvement of air quality, including in port areas, has recently been enacted in Korea to reduce the amount of fine dust generated. As part of such fine dust reduction measures, feasibility studies have been underway on converting diesel engines into battery electric propulsion systems that do not cause fine dust and emissions. Since the battery electric propulsion system can easily utilize renewable energy sources, and does not generate exhaust gas due to combustion of fuel, small coastal ferries with battery electric propulsion systems that use renewable energy have been operating in Europe and the U.S. for several years. However, they have not been introduced in Korea. Therefore, in this study, we selected small coastal ferries in Korea as target ferries, and performed simulations to study the applicability of electric propulsion with batteries linked to solar power systems. Based on the results, we want to confirm the applicability of battery electric propulsion.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.1
• /
• pp.93-100
• /
• 2017

Four-stroke cycles in an automobile engine are suction stroke, compression stroke, combustion stroke and exhaustion stroke. A normal operation of engine in compression and power stroke must be processed in optimal fuel-air pressure. In this paper we describe a development of measuring equipment for engine cylinder pressure with observing supply current to self motor(start motor). By comparing the current wave on pressure of the 4 or 6 cylinder in engine, a abnormal cylinder state will be found. The validity of the proposed measuring equipment was shown by experiment for real automobile.