• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.31-31
• /
• 2011

해마다 반복되는 수해를 대비하여 배수펌프장을 설치하고, 취수보를 철거하는 방법으로 수해예방시스템을 고도화 시키고 있지만, 증가하는 홍수량에 대한 대비책으로는 역부족이다. 따라서, 홍수 피해에 대한 선제적 대응방안으로 강변저류지를 설치하여 상습 침수구역에 대한 대비가 진행되고 있다. 강변저류지 설치를 통해 유역의 홍수량을 분담하고 인접지역의 침수피해를 예방하는 역할을 기대할 수 있다. 국내에서도 영월군의 상습침수구역에 대한 대비책 중 하나로 국토해양부 및 강원도가 함께 영월강변저류지 조성공사를 추진하고 있다. 영월군은 지난 2002년과 2003년에 태풍 '루사'와 '매미'로 인해 심각한 피해를 입었으며, 2006년 집중호우시에도 현재 저류지 예정지역인 방절리 일대와 영월읍 시가지, 북쌍리 등이 대규모로 침수피해를 입은 바 있다. 해당 저류지의 총 넓이는 68만 8천 $m^2$로 물 290만 $m^3$을 가두어 둘 수 있는 규모이다. 하지만, 영월 강변저류지의 저류용량이 290만 $m^3$에 불과해 홍수예방 효과가 미흡하다는 지적이 잇따르고 있다. 따라서, 적절한 수문운영을 통해 홍수저감량과 저류효과를 증대시키는 홍수예방 방안을 제안하고자 한다. 본 연구에서는 유전알고리즘의 적용을 통하여 강변저류지에 설치된 수문의 운영 방법을 개선함으로써 홍수저감량을 최대화하고자 하였다. 수리 수문학적 모형인 HEC-RAS, HEC-I 모형을 연계 운용하여 평창강 유역을 대상으로 수문분석, 홍수유출량 분석, 하류 하천의 홍수영향 분석 결과를 도출하였다. 강변저류지 설치로 인하여 저류지 직하류부를 기준으로 약 $131\;m^3/s$의 첨두홍수량 저감 효과가 발생하는 것으로 검토되었지만, 본 연구에서 제안된 최적화 기법이 적용된 수문운영 방법을 병행하여 운영한다면 추가적으로 $24\;m^3/s$를 저감하는 효과를 얻을 수 있다. 효율적으로 저류지를 운영하여 홍수피해를 사전에 방지하고 나아가 다른 저류지 유역에도 본 연구를 적용하여 홍수피해를 줄이고 합리적으로 용수를 이용하는데 기여할 수 있을 것으로 사료된다.

• Convergence Security Journal
• /
• v.16 no.4
• /
• pp.25-34
• /
• 2016

This paper shall suggest the improvement model for invigorating cyber threat information sharing from the national level, which includes, inter alia, a comprehensive solutions such as the legislation of a guideline for information sharing, the establishment of so-called National Center for Information Sharing, the construction and management of a integrated information system, the development of techniques for automatizing all the processes for gathering, analyzing and delivering cyber threat information, and the constitution of a private and public joint committee for sharing information, so much so that it intends to prevent cyber security threat to occur in advance or to refrain damage from being proliferated even after the occurrence of incidents.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.1
• /
• pp.124-131
• /
• 2008

Recently underground electrical power distribution is increased because people attach importance to aesthetics of the downtown areas. Lew-voltage handhole of underground distribution line for joint and branch point is mainly installed at the sidewalk. So, pedestrian can get a electric shock if fault is occurred in the low-voltage handhole. Furthermore the street was flooded by recently an unusual change in the weather. Fault is occurred in the low-voltage handhole that may create a shock hazard for the human body because a person's body resistance lower due to effect of water. This paper analyses causes of electric shock accidents and check results at the low-voltage handhole. At a result of analysis, the causes of electric shock accidents in domestic and foreign low-voltage handhole are same but environmental conditions of low-voltage handhole are different In the future, the analytical data can be applied to prevent the electric shock at the low-voltage handhole, and can be used to basic data for the improving installment of low-voltage handhole.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.3
• /
• pp.719-724
• /
• 2011

Most recent birth rate at home raising children, only one has come out well. Accordingly, children born to parents is to have a strong interest, and healthcare (Healthcare) sector, while emerging as a new growth industry (Baby Care) Baby Care also increased the interest. Baby Care products until now the food, toiletries and clothing, etc. Although it advances the development of ubiquitous computing environment with the development of the healthcare industry, Baby Care Electronics products have been developed. Europe and the U.S. infant from another room deungeseoneun feeder. At this time SIDS infants to prevent this phenomenon often takes place in order to measure the status of children and away from parents to children, also can check the status of children was used to implement the Platform. In this paper, using the radio frequency real-time observation of data storage without the parents were determined only by the speed of the ARM11-based systems using the S3C6410 CPU and wireless WI-FI (IEEE8.2.11) technology to prevent sudden infant death using Platform for the implementation study was conducted.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.864-870
• /
• 2017

The propellants are burned in the pre-burner of the staged combustion cycle engine, and the resulting hot gas drives the turbine, and the turbine operates the turbo pump. The burned gas passing through the turbo pump is supplied to the combustor at high temperature and high pressure, where the gas is supplied in an excess of fuel or an excess of oxidant depending on the amount of fuel or oxidant. When the cycle works at oxidizer-rich staged combustion, its metal pipe can ignite or explode by the impact of even small particles. In this study, we develop the powder combinations for anti-oxidation coating through the analysis of other coating materials and establish the coating process.

• Korean Journal of Food Science and Technology
• /
• v.16 no.2
• /
• pp.153-158
• /
• 1984

The traditional methods of testing the meltability of cheese, the Schreiber and the Arnott test, were reviewed and compared. The limitations of such methods were examined. Different sensitivities were observed for these two tests. In the Schreiber test, sharp Cheddar showed highest meltability, followed by process American, mild Cheddar, and Mozzarella. In the Arnott test, however, the rank changed to Mozzarella, mild Cheddar, sharp Cheddar, and process American. Process cheese products showed very dispersed values. Meltability increased quickly until about 4 min and held constant after 5 min in the Schreiber test. In the Arnott test, it started to increase after 5 min and held constant after 15 min. The constant meltabilities shown after certain times were caused by scorching or case hardening which prevented further flow. The DSC-thermogram showed endothermal peaks at about 14 and $30^{\circ}C$. These peaks can be accounted for by the fusion of butter fat during heating.

• Clinics in Shoulder and Elbow
• /
• v.12 no.1
• /
• pp.98-101
• /
• 2009

Purpose: These case reports have been prepared to highlight the uncommon occurrence of anterior shoulder dislocation after an epileptic seizure, the recognition of which is important as this type of injury is associated with bony lesions and a high incidence of recurrence. Materials and Methods: We report two cases of recurrent anterior dislocation of the shoulder due to grand mal epilepsy. These cases were treated as usual anterior dislocations of the shoulder, and were regularly followed to detect any recurrence of shoulder instability. Results: Outcome of the surgery in the two cases was different because of the differences in seizure control. In the patient in whom seizures were well-controlled, there was no recurrence of instability, while the patient with poorly controlled seizures developed a recurrence of the dislocation following shoulder repair. Conclusion: The authors emphasize the need to control seizures in order to prevent injury recurrence in this subset of patients.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.12
• /
• pp.1836-1843
• /
• 2017

In this paper, we investigated fire cases those are believed to be caused by explosion of a electrolytic motor start capacitor. Using two types of commercially available electrolytic motor start capacitors, capacitor current and the possibility of capacitor explosion were tested. And the ignition possibility of the internal material leaked from a capacitor was also tested. In addition, experiments were conducted to see if the fire could spread when a capacitor was exposed to an external flame. From our test we observed that the current of the electrolytic motor start capacitor rose continuously to a certain level by product, if the capacitor was continuously energized with working voltage, and then the capacitor was exploded. The gas and liquid leaked from the capacitor by the explosion could ignite by an electric arc and an external flame. The capacitor current at explosion was different product by product, but each product had a certain current level at explosion. And the increase rate of the capacitor current until explosion was 24% and 31% for the products used in the experiment. We proposed the capacitor explosion prevention method that cuts off power when the capacitor current rises to a certain threshold level. The proposed method can be used if the current of the applied electrolytic motor start capacitor rises continuously and then the capacitor is exploded at a certain current level when the capacitor is energized continuously.

• Journal of the Korean Geographical Society
• /
• v.38 no.2
• /
• pp.224-236
• /
• 2003

This study tries to identify the terms which shared the same meaning with a present-day geographical concept region, or jibang(地方) in Korean, Prior to the initiation of modem geography. The analysis of the annals of the pre-modem political regimes and the earliest geography textbooks ends up with the terms oe(外), bang(方), oebang(外方), ji(地面). These terminologies, although having had almost similar meanings that region intends, nonetheless deliver somewhat different connotation depending on the context and times in and during which they were used. Another finding of significance is that region and jibang, both central .words in contemporary geography, began to be used only after the introduction, by way of Japan, of modem geography in the early 20th century. The colonial experience and subsequent political and social turmoil, however, results in careless uses of the terms in geography teaching and research. Efforts need to be continued to address the problems of misuse of these basic terms and, by doing so, to raise geographical pursuits on a right track.

• Fire Science and Engineering
• /
• v.32 no.6
• /
• pp.91-99
• /
• 2018

Recently, the spread of ESS in Korea has increased and a fire accident has also occurred. By July 2018, there were a total of 7 cases. All 7 cases were ESS systems consisting of lithium-ion batteries and were burned down. Both the automatic fire extinguisher and the fire department were not able to digest. In this paper, the characteristics of ESS fire are analyzed based on recent ESS fire situation and field investigation, and the cause of fire is divided into environmental, electrical and thermal factors. As a result, it was found that the ESS fire was correlated with the installation environment of the system. In the domestic and overseas lithium ion battery test standard and ESS facility standard survey, the trends and differences of domestic and overseas facilities standards were identified. Based on the fire status and field investigationy, and domestic and overseas facility standard survey, measures were suggested to prevent and prevent the spread of fire in ESS fire.