• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.5D
• /
• pp.623-631
• /
• 2011

In this study, a new method which can detect incidents in interrupted traffic flow was suggested. The applied method of detecting the incident is the Latin Square Analysis Method by using traffic traits. In the Latin Square Analysis, unlike other previously tried methods, the traffic situation was analyzed, this time considering the changes in traffic traits for each lane and for each time period. The data used in this study were the data observed in the actual field with fine weather. The traffic volumes, the vehicle speed and the occupancy rate were collected on the interrupted flow road. The data were collected in normal and incident situations. The incidents occurred on the second lane, the time of persistent incidents was set to 10 minutes. The Latin Square Analyses were performed using the collected data with the traffic volume, with the vehicle speed or with the occupancy rate. As a result in this study, in case of detecting the traffic situations with Latin Square Analysis, it will be more successful to apply traffic volume to detect the traffic situations than to apply other factors.

• Journal of the Korean Data and Information Science Society
• /
• v.23 no.4
• /
• pp.683-691
• /
• 2012

In $4{\times}4$ graeco-latin square design, powers of rank transformed statistic for testing the main effect are superior to powers of parametric statistic without regard to the effect structure with equally or unequally spaced effect levels as well as the type of population distributions such as exponential, double exponential, normal and uniform distribution. As numbers of block effect or effect sizes are decreased, powers of rank transformed statistic are much higher than powers of parametric statistic. In case that block effects are smaller than a main effect or one block effect is higher than other block effects, powers of rank transformed statistic are much higher than powers of parametric statistic in $4{\times}4$ graeco-latin square design with three block effects and one main effect.

• Journal of the Korean Data and Information Science Society
• /
• v.20 no.2
• /
• pp.401-410
• /
• 2009

Due to the characteristics of 3 ${\times}$ 3 Latin square design which is composed of two block effects and one main effect, powers of rank transformed statistic for testing the main effect are very superior to powers of parametric statistic without regard to the type of population distributions. By order of when all three effects are fixed, when on one block effect is random, when two block effects are random, the rank transform statistic for testing the main effect shows relatively high powers as compared with the parametric statistic. Further when the size of main effect is big with one equivalent size of block effect and the other small size of block effect, powers of rank transformed statistic for testing the main effect demonstrate excellent advantage to powers of parametric statistic.

• Journal of the Economic Geographical Society of Korea
• /
• v.10 no.3
• /
• pp.319-331
• /
• 2007

Nowadays, urbanized area expands its boundary, and distribution of urbanized area is gradually transformed into more complicated pattern. In Korea, SMA(Seoul Metropolitan Area) has outstanding urbanized area since 1960. But it is ambiguous whether urban distribution is clustered or dispersed. That is to say, it is difficult to understand spatial distribution pattern of urbanized area, although urbanized area has grown gradually. This study aims to show the way in which expansions of urbanized area impact on spatial distribution pattern of urbanized area. We use GIS analysis based on raster dataset, quadrat analysis, and nearest neighbor analysis to know distribution pattern of urbanized area in time-series urban growth. Experiments show that cohesion of SMA's urbanized area had increased to the early 1980s, but has decreased from the middle 1980s. Also, urban growth of SMA has been characterized not by spillover growth but by leapfrogging growth and road-influenced growth since the middle 1980s.

• The Journal of the Korea Contents Association
• /
• v.21 no.12
• /
• pp.791-802
• /
• 2021

In Korea, the cities continue to deteriorate, while the vacant houses in the small local towns emerge as a serious social problem. Despite the vacant houses emerge as a serious social problem in the small local towns as well as in the large cities, the basic researches into them are yet to be conducted on a full scale. Thus, in order to know about the spatial distribution of the vacant houses, this study conducted the square analysis and the kernel density analysis. As a result, it was confirmed that the vacant houses in Okcheon-gun had certain crowding forms and characteristics at the level of statistical significance. Next, in order to examine the distribution of the vacant houses in terms of the accessibility to the living SOC facilities, the GIS network analysis was performed, focusing on the major facilities and road networks. As a result, it was found that the better the accessibility to the living SOC facilities such as medical and well-being was, the ratio of the vacant houses was lower. In contrast, it was found that the accessibility to the obligatory facilities such as public administration and educational facilities did not have any important effects on the distribution of the vacant houses. All in all, through this study, the spatial distribution of the vacant houses in the small local town and their accessibility to the major SOC facilities could be analyzed.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2004.10a
• /
• pp.433-438
• /
• 2004

The rapid machining of prototypes plays an important role in product process. Rapid Prototyping(RP) is the widespread technology to produce prototype. But, it have many problems such as shrinkage, deformation and formation occurred by hardening of resin and stair shaping, On the contrary, high speed machining(HSM) technology has many advantages such as good quality, low cost and rapid machining time. Moreover, it is possible to use the material of original product. This paper presents manufacture of trial product by HSM and optimization of machining condition for high productivity in the view of manufacturing time and average error. For example, propeller is machined by the surface machining of thin surface parts. Experiments are designed of machining conditions by Latin Square method and machining condition is optimized and selected by ANOVA

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.10 s.175
• /
• pp.99-106
• /
• 2005

This paper presents manufacture of mock-up by HSM and optimization of machining condition for high productivity in the view of manufacturing time and accuracy. The rapid machining of prototypes plays an important role in building mock-up. Rapid Prototyping(RP) is a technology to make prototype. But, it have many problems such as shrinkage. deformation and formation occurred by hardening of resin and stair shaping. On the contrary, high speed machining(HSM) technology has many advantages such as good quality, low cost and rapid machining time. HSM and RP is compared for machining efficiency. Experiments are designed by Latin Square Method and machining condition is optimized and selected by ANOVA. For example, propeller is machined by the surface machining of thin surface parts.

• The Korean Journal of Applied Statistics
• /
• v.5 no.2
• /
• pp.229-242
• /
• 1992

Bradley and Stewart(1991) considered a large class of experimental designs as multidimensional block designs(MBD's). The simplest MBD could be considered to be a row-column design(RCD). They presented the intrablock analysis of variance for a general row-column design. In this article, a generalized least squares solution for Bradley & Stewart's example is considered. In this case, the assumption is that row and column effects are random. This is an application of revised Paik(1990a,1990b)'s method. The Appendix is devoted to that revised method.

• The Korean Journal of Applied Statistics
• /
• v.24 no.5
• /
• pp.893-904
• /
• 2011

The lecture of the experimental designs consists of two main part-experimental designs and model analysis. Mostly, the progress of the visualization has been made on a model analysis. As the visualization of experimental designs, we can consider the visualization of Latin squares, supersaturated designs, and balanced incomplete block designs. We can propose the design plots as well as use the scatterplots and the scatterplot matrices for the visualization of experimental designs. Through the visualization of experimental designs, we can use the synergy effect in teaching the lecture of the experimental designs.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.28 no.4
• /
• pp.351-359
• /
• 2015

In order to exactly evaluate the seismic collapse capacity of a structure, probabilistic approach is required by considering uncertainties related to its structural properties and ground motion. Regardless of the types of uncertainties, they influence on the seismic response of a structures and their effects are required to be estimated. An incremental dynamic analysis(IDA) is useful to investigate uncertainty-propagation due to ground motion. In this study, a 3-story steel moment-resisting frame is selected for a prototype frame and analyzed using the IDA. The uncertainty-propagation is assessed with categorized parameters representing epistemic uncertainties, such as the seismic weight, the inherent damping, the yield strength, and the elastic modulus. To do this, the influence of the uncertainty-propagation to the seismic collapse capacity of the prototype frame is probabilistically evaluated using the incremental dynamic analyses based on the Monte-Carlo simulation sampling with the Latin hypercube method. Of various parameters related to epistemic uncertainty-propagation, the inherent damping is investigated to be the most influential parameter on the seismic collapse capacity of the prototype frame.