• Proceedings of the KIPE Conference
• /
• 2008.06a
• /
• pp.183-185
• /
• 2008

재택근무와 소규모 창업 등 사무 환경의 변화 에 따라 프린터와 복합기의 소형화가 요구 되고 있다. 이러한 소형화에 의해 프린터 내부의 발열 요소들이 제한 된 공간에 배치되어, 기기 내부의 열 유동 및 발열 개선은 제품의 수명과 안정성 확보를 위한 중요 사항이 되었다. 본 논문에서는 프린터와 복합기의 내부 요소 중 주요 발열원인 전원 공급 장치에 대하여 Computational fluid dynamics (CFD) software 인 ICEPAK을 이용하여 중요 부품의 배치 조건에 따른 대류 와 온도 특성을 확인 하고, 최적화 된 부품 배치 방법을 제안한다. 또한 제안하는 부품 배치 방법을 적용한 초박형 프린터용 50W 급 전원 공급 장치를 제작하여 실제 온도 특성이 개선됨을 확인한다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.725-728
• /
• 2007

본 연구에서는 액상폐기물의 가스화를 통하여 합성가스를 생산하는 공정기술에 관하여 고찰 하였다. 폐기물의 가스화공정기술은 공기, 산소등과 액상폐기물을 고온하에서 가스화반응시켜 폐기물중에 포함된 가연성성분은 CO, $H_2$가 주성분인 합성가스로 전환시키고, 폐기물내에 포함된 무기물은 용융시켜 slag의 형태로 배출시키는 기술이다. 폐기물투입장치, 가스화기 및 용융로, 슬랙배출장치, 합성가스 정제장치, 그리고 수처리장치등로 구성된 Bench급의 가스화용용시스템을 구성하고, 수분 16%, 발열량 4375kcal/kg의 액상폐기물을 가스화 실험한 결과 CO가 $31{\sim}35%$, $H_2$가 $28{\sim}36%$ 포함된 합성가스를 얻을 수 있었고, 합성가스의 발열량은 $1735{\sim}2160kcal/kg$로 나타났다. 또한 가스의 세정에 사용된 세정폐수의 분석과 무기물의 용융을 통하여 발생한 용용슬랙의 용출실험을 통해서 합성가스 생성과정에서의 이차오염 물질은 환경규제치 이하로 발생함을 확인할 수 있었다.

• Fire Science and Engineering
• /
• v.22 no.2
• /
• pp.104-107
• /
• 2008

Heat release rates of main combustibles in residence area were measured by a calorimeter using oxygen consumption method. It was found that the peak heat release rates of the combustibles were 1.0MW for a refrigerator, 0.8MW for a desk, 4.2MW for a wardrobe and 0.4MW for a bed. Especially, the refrigerator and wardrobe were found to be very hazardous because of their fast fire growth rate.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2003.05a
• /
• pp.47-50
• /
• 2003

잉크젯 헤드의 발열체에 적용하기 위해 $poly-Si/SiO_2/Si$ 의 다층기판 위에 결정화된 안정한 $SiO_2$ 코발트 실리사이드 박막을 증착하여 발열체를 제작하고 이들 발열체의 구조적 형상과 온도저항계수 등 전기적 특성을 조사하였다. $SiO_2$ 코발트실리사이드 박막의 형성은 금속 Co 박막을 급속 열처리장치를 이용하여 $800^{\circ}C$에서 20 초 동안 질소 분위기에서 열처리하여 실리사이드 박막을 형성하였다. 발열체의 온도저항계수 값은 약 $^0.0014/{\circ}C$ 값을 얻을 수 있었다. 인가전압 10V, 주파수 10 kHz 및 펄스간격 $1\mu\textrm{s}$ 인가시 발열체의 순간전력은 최대 2 watt를 나타내었다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.4
• /
• pp.740-746
• /
• 2009

Two step serial load induction superheater has been proposed using resonance type induction heat method in this paper. Heat method is a type of flowing the electron induction and current to special alloy heater in body from external heat coil with non-contact method. Inverter was a full bridge serial load resonance type and inductor was used as load in LC resonance design to maximize the efficiency. The developed system is a new heat exchanging method combined with electromagnetic induction heater and fluid movement, ana very accurate to control of heating the gas, liquid and evaporated mass, so on without combustion process.

• Journal of the Society of Disaster Information
• /
• v.14 no.2
• /
• pp.122-129
• /
• 2018

Purpose : This study aims to seek out the risk of low-temperature burns and fire. Method : Hot vests are connected by higher voltage than walking voltage. Results : Accordingly, the possibility of low-temperature burns and fire was proved high. It was also shown that hot vests with relatively lower resistance on heat rays reached a higher temperature as the same voltage was applied. Conclusion : There are some problems with hot vests because they do not have any safety devices like a thermostat or a timer to prevent temperature increasing rapidly. For the purpose of reducing the risk of low-temperature burns and fire, setting the standard of the minimum resistance temperature and regulating the use of heat rays with lower resistance are necessary.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.2
• /
• pp.261-266
• /
• 2015

Power system for renewable energy is composed of module, transform DC power into AC power inverter, control power flow and device for a charge of the grid-connected. Power system for renewable energy produce the most DC power, when this system is much insolation in summer and daytime. But if the certain temperature rises above, the essential grid-connected power inverter is take a nose dive. There, in this paper, we propose an improved reduction of heating system. In addition, selection of the most serious heat region and through analysis of temperature characteristics according to location and distance derive the optimal model.

• Journal of the Microelectronics and Packaging Society
• /
• v.10 no.3
• /
• pp.1-7
• /
• 2003

The crystallized stable cobalt silicide$(CoSi_2)$ films were prepared on $poly-Si/SiO_2/Si$substrates for the application of inkjet printing head as a heating element with omega shape. The structural images and temperature resistance coefficient were investigated. The value of temperature resistance coefficient of the heating element was found to be about $0.0014/^{\circ}C$. The maximum power of the heating element was 2 W at the applied voltage of 2 V, 10 kHz in frequency and $1{\mu}s$ in pulse width. From the investigation of fatigue property according to the repeated applied voltages, there was no drastic changes in the resistances of heating element under the condition of $10^8$ pulsed cycles at below 15 V biased voltage. In contrast, the resistance of heating element was greatly increased at $10^6$ pulsed cycles when the heating element was operated at 17 V.

• Journal of agriculture & life science
• /
• v.52 no.6
• /
• pp.73-79
• /
• 2018

In this study, a torrefaction unit with a capacity of 50 kg/hr was developed and experimented to produce of solid fuel by reuse of the food and agricultural wastes. Dried food wastes and agricultural wastes were used for the experiments and the heated-air torrefaction characteristics were investigated by the raw materials, torrefaction air temperature, and torrefaction time. For the dried agricultural wastes, measured torrefaction capacity and lower heating values were 55.35 kg/hr and 3,333 kcal/kg, respectively. As the lower heating values of the treated samples were greater, by around 7.8%, than those of the non-treated samples, torrefaction process was a very effective method to increase the heating value of the agricultural waste. In case of the dried food waste, torrefaction capacity and lower heating value was measured 88.27 kg/hr and 4,016 kcal/kg, respectively. As the lower heating value of treated ones showed around 9.0% higher than that of non treated ones, torrefaction process is very effective method to increase the heating value of the agricultural waste also. It will be assumed that the heating value shows more higher as increase the air temperature and decrease the moisture content of torrified matter.

• Electric Engineers Magazine
• /
• v.251 no.7
• /
• pp.24-27
• /
• 2003

전열기 및 전기의 발열작용을 이용한 전기기기에는 정격용량 및 허용용량에 맞는 저항기 및 온도제어장치를 이용하여 전기사용기기에 허용전류이상 또는 허용용량 이상의 전류가 흐르지 못하게 하는데 이들 저항기 및 온도제어장치 고장 및 구조적 결함으로 과부하 형태가 나타날 수 있다.