• The Journal of Korean Medicine
• /
• v.15 no.2 s.28
• /
• pp.253-268
• /
• 1994

오종(五種) 약침액(藥鍼液)(약침액(藥鍼液)의 명칭(名稱) : V. OK. I. HO. B)의 안전성(安全性)을 실험적(實驗的)으로 검토(檢討)하기 위하여 급성독성여부(急性毒性與否)를 연구보고(硏究報告)한 이후 발열성시험(發熱性試驗), 피부자극시험(皮膚刺戟試驗), 용혈반응(溶血反應) 및 간독성(肝毒性)과 신독성시험(腎毒性試驗)을 실시(實施)하여 유의(有意)한 결과(結果)를 얻었다. 모든 약침액(藥鍼液)은 발열성시험(發熱性試驗)과 피부자극시험(皮膚刺戟試驗), 간독성(肝毒性) 및 신독성시험상(腎毒性試驗上) 이상소견(異常所見)이 발견(發見)되지 않았으나 용혈반응(溶血反應)의 경우 일부(一部) 약침액(藥鍼液)에서 용혈반응(溶血反應)을 의심(疑心)할 수 있으므로 향후(向後) 이에 대(對)한 연구(硏究)와 세포독성(細胞毒性) 및 항원성시험(抗原性試驗)이 필요(必要) 할 것으로 사려(思慮)된다.

• Fire Science and Engineering
• /
• v.26 no.1
• /
• pp.16-22
• /
• 2012

In fire test, accurate heat release rate measurements provide important information to define the fire safety characteristics of products. The calculation of heat release rate depends on the errors of measuring parameters in experimental set-up. In this study, the uncertainty factors of heat release rate in the room corner test facility, which is installed at Korea Railroad Research Institute, were analyzed. Through the fire testings for the KTX interior materials, the uncertainties of heat release rate were calculated. Results showed that uncertainty was high in the initial stage of fire test and gradually decreased with the growth of fire. The oxygen concentration was a major factor contributing to the combined relative standard uncertainty.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2009.04a
• /
• pp.520-525
• /
• 2009

본 연구에서는 실내 내장재료 많이 사용되고 있는 벽지를 대상으로 선정하여 연소특성을 고찰하고자 콘 칼로리미터, 연기밀도 시험기, 발화점 시험기, 산소지수 시험기를 이용하여 각각의 발열성, 발연성, 착화성, 난연성을 측정하였다. 벽지의 발열특성은 기능성 벽지인 쑥벽지와 특정벽지인 질석벽지가 다른 벽지에 비해 많은 열을 방출하는 것으로 나타났으며, 방염벽지의 연기밀도가 130.8로 가장 높은 값을 나타냈다. 질석벽지는 61초에 착화가 되어 다른 벽지에 비해 착화시간이 최소 4배 이상 늦게 착화가 되었으며, 발화온도 또한 270.8$^{\circ}C$로 높게 나타났다. 산소지수측정 범위는 18.9${\sim}$23.2%의 값으로 공기 중의 산소농도와 비슷한 범위인 것을 확인할 수 있었다.

• Journal of the Korea Institute of Building Construction
• /
• v.16 no.1
• /
• pp.25-34
• /
• 2016

From 1990's, a study on the development of exothermic concrete, a concrete which electro-conductive material is mixed, has been proceeded. However, due to the difficulty of exothermic reproducibility of concrete specimen, the study has been unable to continuously carried out. Accordingly, this study was focused on developing an exothermic concrete for the purpose of snow-melting material. Cement paste and mortar specimens mixed with graphite, conductive metal powder and chemical admixture were made. The evaluation of exothermic performance and reproducibility was conducted under $-2^{\circ}C$ of low temperature. In addition, micro-chemical analysis was carried out to investigate a cause of exothermic reproducibility. As a test result, the specimen mixed with graphite and superplasticizer with air entrained showed the best exothermic performance and reproducibility. Through micro-chemical analysis, it is judged that polymer or methacrylic acid (MAA), the contents inside the superplasticizer with air entrained, gave exothermic reproducibility by generating the electrochemical reaction with graphite.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2009.05a
• /
• pp.359-360
• /
• 2009

This Study is performed Mock-up test accounting for height of placement to review behavior of mass concrete according to kinds of cement & form. First, we measured hydration heat and show a different hydration heat generation characteristics as compared with each other. And we measured mortar outflow, the strength of concrete core and standard specimens, concrete's ability to resist chloride ion penetration in order to durability estimation of concrete. This study was aims to improve quality of mass concrete under marine environment.

• Korean Journal of Clinical Laboratory Science
• /
• v.53 no.1
• /
• pp.1-10
• /
• 2021

Radiopharmaceuticals are drugs that contain radioisotopes and are used in the diagnosis, treatment, or investigation of diseases. Radiopharmaceuticals must be manufactured in compliance with good manufacturing practice regulations and subjected to quality control before they are administered to patients to ensure the safety of the drug. Radiopharmaceuticals for administration to humans need to be sterile and pyrogen-free. Hence, sterility tests and membrane filter integrity tests are carried out to confirm the asepticity of the finished drug product, and a bacterial endotoxin test conducted to assess contamination, if any, by pyrogens. The physical appearance and the absence of foreign insoluble substances should be confirmed by a visual inspection. The chemical purity, residual solvents, and pH should be evaluated because residual by-products and impurities in the finished product can be harmful to patients. The half-life, radiochemical purity, radionuclidic purity, and strength need to be assessed by analyzing the radiation emitted from radiopharmaceuticals to verify that the radioisotope contents are properly labeled on pharmaceuticals. Radiopharmaceuticals always carry the risk of radiation exposure. Therefore, the time taken for quality control tests should be minimized and care should be taken to prevent radiation exposure during handling. This review discusses the quality control procedures and acceptance criteria for a diagnostic radiopharmaceutical.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 1994.04a
• /
• pp.313-313
• /
• 1994

대상환자는 40예중 37예에서 평가가 가능하였고 남녀비는 11:26. 중앙연령 42세 이었으며 대상질환은 위선암 12에, 유방암 10예. 골옥종 5예등 이었다. rhGM-CSF에 의한 부작용은 150.250 $\mu\textrm{g}$/$m^2$/d 용량군에서는 Grade I-II의 전신쇠약감, 근육통.심계항진등이 관찰되었으나 특별한 조치없이 회복되었다. 350$\mu\textrm{g}$/$m^2$/d 용량군에서는 8예에서 WHO grade II-III의 전신쇠약, 전신열감, 흉부압박감, 호흡곤란 등을 호소하였고 1예에서 투여 1일러 WHO gradeIII의 피부반응이 나타났으며, 이 중 2예에서는 rhGM-CSF를 250 $\mu\textrm{g}$/$m^2$/d로 감량투여후 상시 증상이 소실되었다. rhGM-CSF 투여전의 대조기와 투여기의 혈액학적 소견 비교시. 평균 중성구 최저치는 세 용량군에서 모두 관찰기에 비해 시험기어서 증가하였고. 평균 총 백혈군 최저치는 150.350 $\mu\textrm{g}$/$m^2$/d 용량군은 차이가 있었고 250 $\mu\textrm{g}$/$m^2$/d 용량군은 차이가 있었으나 통계적 유의성은 없었다. 비혈구치가 최저치에서 4.000/㎣ 이상으로 회복되는 평균일수와 호중구치가 최저치에서 2.000/㎣ 이상으로 회복되는 평균일수는 세 용량군 모두에서 관찰기어 비해 시험기에서 증가하였다. 고용량 항암약물요법후 중성구 감소에 의한 발열은 rhGM-CSF 비투여기에서 18예. rhGM-CSF 투여기에서 8예 관찰되었다고 발열기간은 각각 5-7일. 2-3일 이었다. 임상 양상은 세 용량군 간 차이가 없었으나, 시험기에서 발열의 발현율이 낮았으며, 발열일 수와 항생제 사용일 수가 짧았다. 결론: 골수억제 조절 효과는 용량에 따른 혈액소견에 미치는 영향, 부작용, 감염의 빈도, 감염발생에 따른 항생제 사용기간 등을 고려하여 그 임상 유효성 평가시, 제 3상 시험에 사용할 권장량 (recommended dose) 은 250 ug/$m^2$/d $\times$ 10d 으로 관찰되었다.

• Journal of IKEEE
• /
• v.21 no.3
• /
• pp.252-255
• /
• 2017

$Mo_xW_{1-x}Si_2$ heaters were fabricated by self-propagating high-temperature synthesis (SHS) process and post sintering process. To validate the reliability of the $Mo_xW_{1-x}Si_2$ heaters, the accelerated life test (ALT) was conducted, and then lifetime to $Mo_xW_{1-x}Si_2$ heaters was estimated by using Minitab programs. Also, the failure analysis of $Mo_xW_{1-x}Si_2$ heaters after ALT was performed through electrical and structural properties. As the results, it was confirmed that the dominant failure mode of $Mo_xW_{1-x}Si_2$ heaters is the crack formation in heaters and the delamination of protective $SiO_2$ layers.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2012.05a
• /
• pp.295-298
• /
• 2012

Repair and strengthening is necessary to extend the service life of existing buildings. Polymer-modified cement mortar (PCM) has been extensively used as a high performance material particularly for finishing and repairing works in concrete building because of itsexcellent adhesion, waterproofing, resistance to chemical attack, and workability. As PCM contains organic polymer, it is necessary to clarify its properties at high temperature under fire, on which sufficient data are not available. This paper evaluated the burn-up characteristics of polymer-modified cement mortar with cone calorimeter test, non-combustibility test and flammability test with experimental parameters such as the types of polymer, unit-polymer content, polymer-cement ratio and thickness of the specimen.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.28 no.3
• /
• pp.47-58
• /
• 2024

This study were conduced experimentally to analyze the heat-generating performance, flexural strength, and microstructure of conductive mortar mixed with micro steel fiber and multi-wall carbon nanotube (MWCNT). In the conductive mortar heat-generating performance and flexural strength tests, the mixing concentration of MWCNT was selected as 0.0wt%, 0.5wt%, and 1.0wt% relative to the weight of cement, and micro steel fibers were mixed at 2.0vol% relative to the volume. The performance experiments were conducted with various applied voltages (DC 10V, 30V, 60V) and different electrode spacings (40 mm, 120 mm) as parameters, and the flexural strength was measured at the curing age of 28 days and compared and analyzed with the normal mortar. Furthermore, the surface shape and microstructure of conductive mortar were analyzed using a field emission scanning electron microscope (FE-SEM). The results showed that the heat-generating performance improved as the mixing concentration of MWCNT and the applied voltage increased, and it further improved as the electrode spacing became narrower. However, even if the mixing concentration of MWCNT was added up to 1.0 wt%, the heat-generating performance was not significantly improved. As a result of the flexural strength test, the average flexural strength of all specimens except the PM specimen and the MWCNT mixed specimens was 4.5 MPa or more, showing high flexural strength due to the incorporation of micro steel fibers. Through FE-SEM image analysis, Through FE-SEM image analysis, it was confirmed that a conductive network was formed between micro steel fibers and MWCNT particles in the cement matrix.