• Title/Summary/Keyword: 발생능력

Search Result 3,275, Processing Time 0.039 seconds

Real-time Nutrient Monitoring of Hydroponic Solutions Using an Ion-selective Electrode-based Embedded System (ISE 기반의 임베디드 시스템을 이용한 실시간 수경재배 양액 모니터링)

  • Han, Hee-Jo;Kim, Hak-Jin;Jung, Dae-Hyun;Cho, Woo-Jae;Cho, Yeong-Yeol;Lee, Gong-In
    • Journal of Bio-Environment Control
    • /
    • v.29 no.2
    • /
    • pp.141-152
    • /
    • 2020
  • The rapid on-site measurement of hydroponic nutrients allows for the more efficient use of crop fertilizers. This paper reports on the development of an embedded on-site system consisting of multiple ion-selective electrodes (ISEs) for the real-time measurement of the concentrations of macronutrients in hydroponic solutions. The system included a combination of PVC ISEs for the detection of NO3, K, and Ca ions, a cobalt-electrode for the detection of H2PO4, a double-junction reference electrode, a solution container, and a sampling system consisting of pumps and valves. An Arduino Due board was used to collect data and to control the volume of the sample. Prior to the measurement of each sample, a two-point normalization method was employed to adjust the sensitivity followed by an offset to minimize potential drift that might occur during continuous measurement. The predictive capabilities of the NO3 and K ISEs based on PVC membranes were satisfactory, producing results that were in close agreement with the results of standard analyzers (R2 = 0.99). Though the Ca ISE fabricated with Ca ionophore II underestimated the Ca concentration by an average of 55%, the strong linear relationship (R2 > 0.84) makes it possible for the embedded system to be used in hydroponic NO3, K, and Ca sensing. The cobalt-rod-based phosphate electrodes exhibited a relatively high error of 24.7±9.26% in the phosphate concentration range of 45 to 155 mg/L compared to standard methods due to inconsistent signal readings between replicates, illustrating the need for further research on the signal conditioning of cobalt electrodes to improve their predictive ability in hydroponic P sensing.

The Research on Witch in (<마법소녀 마도카☆마기카>에서 마녀에 관한 연구)

  • Yun, Young-Seok
    • Cartoon and Animation Studies
    • /
    • s.39
    • /
    • pp.1-25
    • /
    • 2015
  • "Magical girl" is one of many popular genres that are watched in Japanese animation. The characteristics of "Magical girl" genre shows that most main heroine as the girl in young age, and this young girl play her role as a character with supernatural power. The majority in population of Japanese animation consumers were men. However, women began to become this population of Japanese animation consumers with the beginning of "Magical girl" genre, which also became a cause for the birth of "Shojo anime". The first "Shojo anime", as well as the first animation of "Magical girl" genre in Japan was , and this piece made a great hit when it was broadcasted. Since the great hit of , new pieces of animation in "Magical girl" genre has broadcasted through television continually, making other great hits also with in 1982 and< Sailor Moon> in 1992. Discussing of which, made not only a great hit in Japan, but worldwide as well, that its new season of TV series, , is broadcasted in 2014. "Magical girl" genre was loved by viewers of Japanese animation for a long time, and it is still broadcasted regularly today. In observation of pieces in "Magical girl" genre, magical girls who appear as a main character either fight for the world they live in, or take on an adventure, or take an action according to their idealistic purpose. However, the magical girls who appear in take an action not for the peace of their world, but rather for their own benefits and purposes. In , magical girls fight against the witches and their familiar spirits, which end up in a horrible conclusion. The witches who magical girls fought against were not already the witches in the beginning, but in fact were the other magical girls who took their action in the past. It Magical girls in present time were having witch hunt against the witches, who were once another magical girls in the past. Unlike traditional "Magical girl" genre, where witches and magical girls were used to be an that magical girls end up turning into witches. Witches did not exist in the beginning, but rather someone had to be one, to be hunted down in witch hunt. The cause of witch hunt did not exist in the beginning, but rather the ones had to be tagged as witches to be hunted down. Therefore, this paper is written to discuss an existence of witch in research of its historic origin of witch hunt, and on the witches appear in .

Removal of Nitrogenous Compounds by Immobilized Mixed Microorganisms Including Photosynthetic Bacteria (광합성 세균을 포함한 고정화 복합미생물에 의한 질소성분 제거)

  • Cho, Kyoung Sook;Kim, Jeong Bo;Jeong, Soo Kyoung;Jeong, Hae Yoon;Cho, Jeong Sub;Kim, Joong Kyun
    • Journal of Marine Bioscience and Biotechnology
    • /
    • v.1 no.2
    • /
    • pp.91-97
    • /
    • 2006
  • For efficient removal of nitrogenous compounds produced in recirculating aquaculture system, the N removal characteristics of immobilized mixed microorganisms were investigated at various mixing ratios of photosynthetic bacteria (PSB) immobilized in PVA beads or CTA cubes and ammonium utilizing bacteria (AUB) immobilized in PVA beads. On the optimal medium of AUB, the maxium gas production rate was obtained at the mixing ratio of 10:40 (PSB:AUB), and the gas production rate increased as the portion of AUB beads in the mixed beads increased. When the mixing ratios of PSB:AUB beads were 50:0, 40:10, 25:25 and 10:40, the final pHs were measured to be 6.29, 6.01, 5.69 and 5.13, respectively. On the optimal medium of PSB, however, the volume and the rate of gas production decreased remarkably as the portion of AUB beads in the mixed beads increased. The final pH was measured to be approximately 6.5, regardless of the mixing ratio. In the reactions by the mixed culture of PSB cubes and AUB beads, all results showed the same tendency of those by the mixed culture of PSB and AUB beads, but the volume and the rate of gas production decreased remarkably, even with 0.2ml of gas production in control. From all the results, the use of mixed PSB and AUB beads at the ratio of 10:40 seems to be efficient to remove nitrogenous compounds in wastewater from recirculating aquaculture system.

  • PDF

아동의 잠재된 영재성 개발 프로그램

  • Lee, Sun-Ju
    • Journal of Gifted/Talented Education
    • /
    • v.10 no.2
    • /
    • pp.71-86
    • /
    • 2000
  • According to Torrance, it is said that about 30% of feeble-headed children are bearing potential brilliant quality. Such potential gifted children exist really much more than children who appear to show their own brilliant quality. Nevertheless, research activity to reveal children's potential giftedness has not been relatively actively progressed. Renzulli, Smith and so on progresses research activity to reveal children's potential giftedness and strategies developed by them are being used widely all over the world, but these strategies show the defect that children can not overcome by themselves the interfered factors influenced negatively on their gift revelation. Russian scholar Babaeva made the effective education program to develop children's potential giftedness. Her program includes various activity methods or mental correct activity and psychological training activity and such training activity is realized through some steps and each step has it's own purpose and realization method. With the result that children discriminated as common children by the experimental study which is progressed by the present program participate, their standard of intelligence and originality showed the improved effect of the similar standard to children factors not a little influencing on children's giftedness development process but she also developed the leading concrete study method for the children to overcome this by themselves. In this paper, the present writer will examine potential giftedness development program researched in Russia and discuss their theoretic background and concrete activity course, activity result. Through this, children's have the excellent abilities in various spheres, this writer will obtain significant suggestions to educate the potential gifted children who do not display their own potentialities and do not receive a favor from gifted children program.

  • PDF

EFFICIENCY OF DENTIN CUTTING AND ROOT -END RETROCAVITY PREPARATION USING ULTRASONIC DIAMOND INSTRUMENTS AND THEIR INFLUENCE ON TOOTH STRUCTURE (초음파 다이아몬드 기구의 상아질 삭제 효과, 치근단 역충전 와동 형성효율 및 치질에의 영향)

  • Lim, Choon-Hee;Kim, Sung-Kyo
    • Restorative Dentistry and Endodontics
    • /
    • v.23 no.1
    • /
    • pp.54-67
    • /
    • 1998
  • The purposes of this study were to evaluate the efficiency of dentin cutting and root-end cavity preparation, and to determine the incidence of tooth crack when root-end retrograde cavity preparation was done with. ultrasonic diamond instruments. To evaluate the efficiency of dentin cutting, ultrasonic diamond and stainless steel instruments were applied to 20 exposed bovine dentin surfaces perpendicularly or parallely at the low, and medium power settings for 1 minute ($Miniendo^{TM}$, EIE, CA, U.S.A.). The resultant cavity depth was measured. To evaluate the efficiency of cavity preparation and to investigate the incidence of tooth crack, 165 mesiobuccal, distobuccal and palatal root-ends of extracted human maxillary first molars were resected by 3 mm perpendicularly to the long axis of tooth using a slow speed diamond saw after root canal preparation and filling. Retrocavities were prepared using a ultrasonic diamond instrument or a stainless steel one of the low- or medium power settings of 2 or 6. Time consumed and the number of strokes used for the cavity preparation were measured and the incidence of tooth cracks was evaluated under a stereomicroscope. The results were as follows: Both at the low and medium power settings, and both with perpendicularly- and parallely applied tips to dentin, diamond instruments showed higher dentin cutting efficiency than stainless steel ones did (p<0.01). When tips were applied to dentin perpendicularly, both diamond instrument and stainless steel one showed higher cutting efficiency with medium power setting than with low power one (p<0.01). Both at the low- and medium power settings, both diamond instrument and stainless steel one showed higher cutting efficiency when tips were applied perpendicularly to dentin surface than applied parallely (p<0.01). At the medium power setting, the number of stroke and time consumed were less with diamond instrument than with stainless steel one (p<0.05) for the retrograde cavity preparation. At the low power setting, diamond instrument induced less tooth cracks than stainless steel one did (p<0.01).

  • PDF

A User Optimer Traffic Assignment Model Reflecting Route Perceived Cost (경로인지비용을 반영한 사용자최적통행배정모형)

  • Lee, Mi-Yeong;Baek, Nam-Cheol;Mun, Byeong-Seop;Gang, Won-Ui
    • Journal of Korean Society of Transportation
    • /
    • v.23 no.2
    • /
    • pp.117-130
    • /
    • 2005
  • In both deteministic user Optimal Traffic Assignment Model (UOTAM) and stochastic UOTAM, travel time, which is a major ccriterion for traffic loading over transportation network, is defined by the sum of link travel time and turn delay at intersections. In this assignment method, drivers actual route perception processes and choice behaviors, which can become main explanatory factors, are not sufficiently considered: therefore may result in biased traffic loading. Even though there have been some efforts in Stochastic UOTAM for reflecting drivers' route perception cost by assuming cumulative distribution function of link travel time, it has not been fundamental fruitions, but some trials based on the unreasonable assumptions of Probit model of truncated travel time distribution function and Logit model of independency of inter-link congestion. The critical reason why deterministic UOTAM have not been able to reflect route perception cost is that the route perception cost has each different value according to each origin, destination, and path connection the origin and destination. Therefore in order to find the optimum route between OD pair, route enumeration problem that all routes connecting an OD pair must be compared is encountered, and it is the critical reason causing computational failure because uncountable number of path may be enumerated as the scale of transportation network become bigger. The purpose of this study is to propose a method to enable UOTAM to reflect route perception cost without route enumeration between an O-D pair. For this purpose, this study defines a link as a least definition of path. Thus since each link can be treated as a path, in two links searching process of the link label based optimum path algorithm, the route enumeration between OD pair can be reduced the scale of finding optimum path to all links. The computational burden of this method is no more than link label based optimum path algorithm. Each different perception cost is embedded as a quantitative value generated by comparing the sub-path from the origin to the searching link and the searched link.

Two-dimensional Velocity Measurements of Campbell Glacier in East Antarctica Using Coarse-to-fine SAR Offset Tracking Approach of KOMPSAT-5 Satellite Image (KOMPSAT-5 위성영상의 Coarse-to-fine SAR 오프셋트래킹 기법을 활용한 동남극 Campbell Glacier의 2차원 이동속도 관측)

  • Chae, Sung-Ho;Lee, Kwang-Jae;Lee, Sungu
    • Korean Journal of Remote Sensing
    • /
    • v.37 no.6_3
    • /
    • pp.2035-2046
    • /
    • 2021
  • Glacier movement speed is the most basic measurement for glacial dynamics research and is a very important indicator in predicting sea level rise due to climate change. In this study, the two-dimensional velocity measurements of Campbell Glacier located in Terra Nova Bay in East Antarctica were observed through the SAR offset tracking technique. For this purpose, domestic KOMPSAT-5 SAR satellite images taken on July 9, 2021 and August 6, 2021 were acquired. The Multi-kernel SAR offset tracking proposed through previous studies is a technique to obtain the optimal result that satisfies both resolution and precision. However, since offset tracking is repeatedly performed according to the size of the kernel, intensive computational power and time are required. Therefore, in this study, we strategically proposed a coarse-to-fine offset tracking approach. Through coarse-to-fine SAR offset tracking, it is possible to obtain a result with improved observation precision (especially, about 4 times in azimuth direction) while maintaining resolution compared to general offset tracking results. Using this proposed technique, a two-dimensional velocity measurements of Campbell Glacier were generated. As a result of analyzing the two-dimensional movement velocity image, it was observed that the grounding line of Campbell Glacier exists at approximately latitude -74.56N. The flow velocity of Campbell Glacier Tongue analyzed in this study (185-237 m/yr) increased compared to that of 1988-1989 (140-240 m/yr). And compared to the flow velocity (181-268 m/yr) in 2010-2012, the movement speed near the ground line was similar, but it was confirmed that the movement speed at the end of the Campbell Glacier Tongue decreased. However, there is a possibility that this is an error that occurs because the study result of this study is an annual rate of glacier movement that occurred for 28 days. For accurate comparison, it will be necessary to expand the data in time series and accurately calculate the annual rate. Through this study, the two-dimensional velocity measurements of the glacier were observed for the first time using the KOMPSAT-5 satellite image, a domestic X-band SAR satellite. It was confirmed that the coarse-to-fine SAR offset tracking approach of the KOMPSAT-5 SAR image is very useful for observing the two-dimensional velocity of glacier movements.

Selective Algicidal Effects of a Newly Developed GreenTD against Red Tide Harmful Alga (GreenTD 물질을 이용한 유해 적조 발생 종의 선택적 살조능 평가)

  • Lee, Minji;Shin, Juyong;Kim, Jin Ho;Lim, Young Kyun;Cho, Hoon;Baek, Seung Ho
    • Korean Journal of Environmental Biology
    • /
    • v.36 no.3
    • /
    • pp.359-369
    • /
    • 2018
  • Harmful algal blooms (HABs) are a serious problem for public health and fisheries industries, thus there exists a need to investigate the possible ways for effective control of HABs. In the present study, we investigated the algicidal effects of a newly developed GreenTD against the HABs (Chattonella marina, Heterosigma akashiwo, Cochlodinium polykriokides, and Heterocapsa circularisquama) and non-HABs (Chaetoceros simplex, Skeletonema sp. and Tetraselmis sp.), which is focused on the different population density and concentration gradients of algicidal substances. The time series viability of target alga was assessed based on the activity of Chl. a photosynthetic efficiency in terms of $F_v/F_m$, and in vivo fluorescence (FSU). Effective control of Raphidophyta, C. marina and H. akashiwo was achieved at a GreenTD concentration of $0.5{\mu}gL^{-1}$ and $0.2{\mu}gL^{-1}$, respectively, and regrowth of both the species was not observed even after 14 days. The inhibitory ratio of the dinoflagellate, C. polykriokides was more than 80% at $0.2{\mu}gL^{-1}$ of GreenTD. H. circularisquama was constantly affected in the presence of $0.2{\mu}gL^{-1}$ of GreenTD in the high- and low-population density experimental groups. On the other hand, diatoms, C. simplex, and Skeletonema sp. were not significantly affected even in the presence of $0.2{\mu}gL^{-1}$ of GreenTD and exhibited re-growth activity with the passage of incubation time. In particular, green alga Tetraselmis sp. remained unaffected even in the presence of the highest concentration of GreenTD ($1.0{\mu}gL^{-1}$), implying that non-HABs were not greatly influenced by the algicidal substances. As a result, the algicidal activity of GreenTD on the harmful and nonharmful algae was as follows: raphidophyte>dinoflagellates>diatoms>green alga. Consequently, our results indicate that inoculation of GreenTD substances into natural blooms at a threshold concentration ($0.2{\mu}gL^{-1}$) can maximize the algicidal activity against HABs species. If we consider the dilution and diffusion rate in the field application, it is hypothesized that GreenTD will demonstrate economic efficiency, thus leading to effective control against the target HABs in the closed bay.

Der Vollrauschtatbestand de lege ferenda (완전명정죄 처벌규정의 입법론)

  • Seong, Nak-Hyon
    • Journal of Legislation Research
    • /
    • no.55
    • /
    • pp.137-166
    • /
    • 2018
  • Wenn nach dem starken Trinken etwas strafbares passiert, so ist das Gesamtverhalten als $strafw{\ddot{u}}rdig$ und strafbar anzuerkennen. Aber nach dem Schuldprinzip handelt ohne Schuld, wer bei Begehung der Tat $unf{\ddot{a}}hig$ ist, das Unrecht der Tat einzusehen oder nach dieser Einsicht zu handeln(Koinzidenzprinzip). Die Rechtsfigur der "actio libera in causa" dient dazu, diese in $h{\ddot{a}}ufigen$ $F{\ddot{a}}llen$ als kriminalpolitisch $unerw{\ddot{u}}nscht$ empfundene $L{\ddot{u}}cke$ zu umgehen. Dabei kommt auch dem Vollrauschtatbestand in der Praxis $erh{\ddot{o}}hte$ Bedeutung zu. Der deutsche Gesetzgeber war sich bei der Aufnahme des Vollrauschtatbestandes in das Gesetz durchaus $bewu{\ss}t$, $da{\ss}$ die Vorschrift eine Ausnahme zur Schuldzurechnungsregelung darstellte. Er $w{\ddot{a}}hlte$ jedoch die Form eines $selbst{\ddot{a}}ndigen$ Tatbestandes, um die Durchbrechung des reinen Schuldprinzips $ertr{\ddot{a}}glich$ zu machen. Der Vollrauschtatbestand ist ein abstraktes $Gef{\ddot{a}}hrdungdsdelikt$ -demnach die im Rausch verwirklichte rechtswidrige Tat nur objektive Bedingung der Strafbarkeit ist -, das sachlich eine Schuldzurechnungsregelung $enth{\ddot{a}}lt$, und zwar eine Ausnahme $gegen{\ddot{u}}ber$ die Regelungen ${\ddot{u}}ber$ Schuldzurechnung. Dieser Vollrauschtatbestand ist dennoch als regitime $Erg{\ddot{a}}nzung$ der in Schuldzurechnungsregelungen beschriebenen $Schuldzurechnungsgrunds{\ddot{a}}tze$ anzusehen. Er steht $n{\ddot{a}}mlich$ in Einklang mit dem Schuldgrundsatz, wenn als subjektives Tatbestandsmerkmal des Vollrausches die Kenntnis der $Gef{\ddot{a}}hrlichkeit$ des Rauschzustandes $f{\ddot{u}}r$ die Begehung von Delikten vorausgesetzt wird.

Development of flow measurement method using drones in flood season (II) - application of surface velocity doppler radar (드론을 이용한 홍수기 유량측정방법 개발(II) - 전자파표면유속계 적용)

  • Lee, Tae Hee;Kang, Jong Wan;Lee, Ki Sung;Lee, Sin Jae
    • Journal of Korea Water Resources Association
    • /
    • v.54 no.11
    • /
    • pp.903-913
    • /
    • 2021
  • In the flood season, the measurement of the river discharge has many restrictions due to reasons such as budget, manpower, safety, convenience in measurement and so on. In particular, when heavy rain events occur due to typhoons, etc., it is difficult to measure the amount of flood due to the above problems. In order to improve this problem, in this study, a method was developed that can measure the river discharge in a flood season simply and safely in a short time with minimal manpower by combining the functions of a drone and a surface velocity doppler radar. To overcome the mechanical limitations of drones caused by weather issues such as wind and rainfall derived from the measurement of the river discharge using the conventional drone, we developed a drone with P56 grade dustproof and waterproof performance, stable flight capability at a wind speed of up to 36 km/h, and a payload weight of up to 10 kg. Further, to eliminate vibration which is the most important constraint factor in the measurement with a surface velocity doppler radar, a damper plate was developed as a device that combines a drone and a surface velocity Doppler radar. The velocity meter DSVM (Dron and Surface Veloctity Meter using doppler radar) that combines the flight equipment with the velocity meter was produced. The error of ±3.5% occurred as a result of measuring the river discharge using DSVM at the point of Geumsan-gun (Hwangpunggyo) located at Bonghwang stream (the first tributary stream of the Geum River). In addition, when calculating the mean velocity from the measured surface velocity, the measurement was performed using ADCP simultaneously to improve accuracy, and the mean velocity conversion factor (0.92) was calculated by comparing the mean velocity. In this study, the discharge measured by combining a drone and a surface velocity meter was compared with the discharge measured using ADCP and floats, so that the application and utility of DSVM was confirmed.