• Composites Research
• /
• v.33 no.5
• /
• pp.309-314
• /
• 2020

Polymer composites were used to reduce the weight of the spacecraft's cryogenic propellant tank. Since these materials were directional, the permeability performance of the gas permeated or delivered in the stacking direction was an indicator directly related to performance such as tank stability and onboard fuel quantity estimation. In addition, the results of permeation measurements and optical analysis of the surface to verify the effect of the number of cycles exposed to the cryogenic-room temperature environment are included. As a result, the permeability was inversely proportional to the thickness and was proportional to the number of thermal shocks, and it was verified that the permeability performance was suitable for the cryogenic propellant tank material for the space launch vehicle.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.173.2-173.2
• /
• 2012

위성체가 발사체에 실려 발사될 때에 매우 높은 가속도에 의한 정적, 동적 하중 및 공기의 저항에 의한 하중, 연소 가스 분출시 발생하는 음향에 의한 하중, 발사체로부터 분리될 때 발생하는 충격 하중 등 여러 가지의 극심한 하중을 겪게 된다. 이러한 발사 환경에 대한 안정성을 검토하기 위해 발사체 업체에서 제공하는 매뉴얼 상의 설계 조건을 이용하여 설계하고 해석하여 검증한다. 천리안 위성의 후속 위성으로 해상도 및 채널 성능 향상된 차세대 기상탑재체를 탑재하는 정지궤도 복합위성을 개발 중이다. 임무 수명 기간을 연장할 수 있는 3.5톤급 혹은 그 이상의 플랫폼에 대한 형상 설계를 수행하였고 그 내용을 목적으로 한다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.4
• /
• pp.367-374
• /
• 2011

Friction springs have different characteristics while loading and un-loading. Because of these characteristics, they are utilized in impact systems. In this paper, the design of a recoil system with friction springs for use in a machine gun system has been presented. In order to determine the stiffness of a friction spring, equations of motion for a simple gun model with a recoil system have been derived. The impulse balance scheme has been adopted. On the basis of simulation results, the diameter of the friction spring has been determined.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.363-366
• /
• 2006

In general, pyrotechnic shock or pyroshock is generated during the operation of separation devices, which use explosives, such as pyrobolt, puronut, purocutter, linear shape charge, and so on. During the flight of launch vehicle, pyroshock is mainly produced at the events of satellite separation, fairing separation and stage separation. In this paper, characteristics of pyroshock are introduced in the first place and measured shock result data at the UMR of satellite mock-up during the separation tests of satellite and fairing are suggested. These results are compared with the suggested pyroshock test specification of satellite, and it finally confirms that the specification is reasonable for the qualification of satellite against pyroshock.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.26 no.6_spc
• /
• pp.667-673
• /
• 2016

Canister with composite sandwich panel has been suggested owing to its higher stiffness and strength over a weight for square shaped canisters. The pyro shock induced by a short time explosion inside a canister is generally considered to be the most severe source of load affecting on the entire structure. Therefore, in this study, the approach and modeling method to identify the effect of pyro shock on canister with composite sandwich panel in a numerical way were mainly discussed. Moreover, the verification was implemented through comparison with test results.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.11a
• /
• pp.203-204
• /
• 2022

This study reviewed the impact resistance properties according to the thickness of concrete as part of a research on the protection technology for high-velocity projectile that may occur during an explosion of small green energy facilities such as a hydrogen station and an energy storage system.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.11a
• /
• pp.1000-1005
• /
• 2003

The shock separation test simulates the environmental effects of the spacecraft separation from launch vehicle. The shock separation test for a structural model of KOMPSAT-Ⅱ(Korea Multi-Purpose SATellite Ⅱ) was performed in SITC(Satellite Integration ＆ Test Center) launch environmental test hall at KARI(Korea Aerospace Research Institute) to verify the shock test requirement of the spacecraft, to predict the induced acceleration responses on the primary structures and payloads by the explosion of pyre-lock and to perform mechanical fit check. The spacecraft with S/A was mated vertically to LV(Launch Vehicle) adapter simulator via a clamp band, then hoisted and suspended above a foam test bed by four isolation springs secured to the spacecraft hoist fittings to isolate the payload platform shock wave from the sling elements. For separation process, real pyre-devices were used and the time response signals from 60 accelerometers installed on the interested points was acquired and recorded. The SRS responses for each response channels were calculated and the achieved SRS's on the separation plane was reviewed and evaluated in comparison to the ICD(Interface Control Document) value.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.423-425
• /
• 2017

When many space launchers and rockets need to be separated, the pyrotechnic separators have been widely used because of their high reliability and high energy generation. However, intensive pyroshock and debris from the high-explosive type separator may cause fatal damage to the equipment inside of the space launchers or rockets. To solve this problem, a pressure-cartridge type low-impact separator has been developed. In this study, one of the low-impact separators, the split-type pyrolock, was used. We established a mathematical model for the split-type pyrolock that simulates the state of combustion gas and the separation behavior of four independent internal components and verified the mathematical model through comparing with experiment results.

• Journal of the korean Society of Automotive Engineers
• /
• v.15 no.2
• /
• pp.84-91
• /
• 1993

The dynamic behaviors of a launcher under impulsive forces are analyzed. All the components of the system, ie ; chassis, turret, cage and suspension parts, are modeled as rigid. The dynamic analysis code, which is developed with the formulae describing the system equations of motion in terms of relative quantities, is used to carry out the analysis. The results show the dynamic responses of chassis and cage when the driving constraints are imposed on turret and cage.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2015.10a
• /
• pp.73-74
• /
• 2015

In the world the interests about a unmanned surface vehicle(USV) are growing up. However it is difficult to launch and recover a USV because of no men on board of USV. And it is more difficult in recovery than launch of USV. So in this research the heaving line launcher was developed to support the recovery of USV easier. And a mock-up was manufactured to validate for adoption to the USV. The muck-up is composed of launcher pipe, remote trigger, air tank, tow shell and heaving line. Tests in land using the mock-up were carried out. The forces by the heaving line launcher to USV were measured by a measuring table during the tests in land. In this paper the development of a mock-up of heaving line launcher, tests in land and the measured forces during tests are presented.