• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1992.04a
• /
• pp.94-98
• /
• 1992

낮은 점도를 갖는 단위체(monomer)나 반응성이 있는 올리고머(oligomer)를 이용한 생산속도가빠른 반응사출성형(reaction injection molding)은 일반적인 열가소성 고분자 재료의 사출성형(thermoplastic modding)에 비하여 기계 설비비용을 상당 히 감소시킬 수 있는 장점을 갖으며, 매우 크고 복잡한 형태의 제품을 가공하기가 용이하고, 특히짧은 가공주기(cycle time) 에 부합하는 금형 내에서의 빠른 종합반응이 특징이다. 본 연구는 반응사출성형용 폴리우레탄을 이용한 미세포 포옴의 가공 시 초음파 가진의 영향에대한 이론적 해석과 반응사출 성형을 모사할 수 있는 실험장치에의해 가공되어지는 시편의 파단면을 전자주사현미경에 의해 관찰함으로써 기포의 크기를 조절할 수 있는 가능성에 대한 고찰이 목적이다.

• Journal of the Korea Convergence Society
• /
• v.11 no.11
• /
• pp.211-217
• /
• 2020

There is an increasing demands of more efficient and economical ways of mold making according to the spreading trend of small quantity batch production system. Therefore, this study aims to examine the applicability of ultra high strength concrete, which has a compressive strength over 80MPa, as a mold material. The ultra high strength concrete has several advantages such as lower cost, lighter weight and convenience of shape making compared to the traditional mold materials. Although the strength of the ultra high strength concrete is lower than that of the tool steel, it was considered to be useful for small batch processes with relatively low pressure. Therefore, in this study, a prototype mold for reaction injection molding of polyurethane was developed using ultra high strength concrete and it was examined that the possibility and characteristics of concrete as a mold material.

• Proceedings of the Korean Fiber Society Conference
• /
• 1999.10a
• /
• pp.77-80
• /
• 1999

• Transactions of the Korean Society of Automotive Engineers
• /
• v.19 no.1
• /
• pp.66-72
• /
• 2011

Injection pressure is an important factor in filling procedure for injection molded parts. In addition, weldlines should be avoided to successfully produce injection molded parts. In this study, we optimally obtained injection molding process parameters that minimize injection pressure. Then, we determined the thickness of the part to avoid weldlines. To solve the optimization problem proposed, we employed MAPS-3D (Mold Analysis and Plastics Solution-3 Dimension), a commercial CAE tool for injection molding analysis, and PIAnO (Process Integration, Automation, and Optimization) as a commercial PIDO (Process Integration and Design Optimization) tool. We integrated MAPS-3D into PIAnO, automated the analysis and design procedure, and performed optimization by employing PQRSM (Progressive Quadratic Response Surface Method) equipped in PIAnO. We successfully obtained optimization results, which demonstrates the effectiveness of our design method.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.6 s.249
• /
• pp.615-621
• /
• 2006

Increased application of optical disks requires more improved dynamic stability of rotating disks. In this study, a new concept of controlling the processing conditions of injection molded disks was developed to improve vibration characteristics. The critical speed, which shows stiffness and dynamic stability of disk, is affected by the residual stress distribution; this varies as functions of distance from the gate and processing condition. The critical speed of disk was calculated with the initial stress taken into consideration, which was determined from injection molding simulation. Choosing melt temperature, mold temperature, filling speed and packing pressure as design parameters, critical speed is maximized with the method of response surface. It is shown that the stability of injection molded disk has been improved for the new condition obtained as a result of the study proposed.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.11 s.242
• /
• pp.1445-1454
• /
• 2005

In order to minimize warping deformation which is an essential factor in the failure of injection molding parts, this study proposes an optimization design method fer determining design variables of injection molding parts. First, using a commercial package program for injection molding analysis, namely, Computer Aided Plastics Application(CAPA), we investigate the effects of parameters of injection molding process. Next, an optimum design process is established by interfacing CAPA to PQRSM embedded in EMD10S, a design framework developed by the conte. of innovative Design Optimization Technology(iDOT). PQRSM is a very efficient sequential approximate optimization algorithm. Optimum design results demonstrate the effectiveness of the design method suggested in this study by showing that the results of the optimum design is better than those of the initial design. It is believed that the proposed methodology can be applied to other injection molding design applications.

• Polymer Science and Technology
• /
• v.9 no.3
• /
• pp.209-215
• /
• 1998

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.1
• /
• pp.21-26
• /
• 2014

When iodine container for dental mouth treatment is opened, thread for treatment is cut by the blade in cap of container. Due to the problem of corrosion in a short period time after the reaction of metal blade to iodine solution, it gives impact on patient hygiene. In order to solve the problem, alternative products such as ceramic blade are developed and produced recently. In case of ceramic blade, it is produced by handwork and machine work. In this study, for the quantity production of ceramic blade with powder injection molding, we proposed a delivery system to have uniform charge of 20 cavity. Using Moldflow, simulation on 20 Cavity flow was performed. And then the mold was obtained through mold production and modification.(based on simulation) After injection molding, debinder, sintering process was achieved for ceramic blade, and the cap product was completed via insert injection on ceramic blade. In this study, we verified possibility of quantity production of ceramic blade which showed effective performance for cutting.

• Ceramist
• /
• v.4 no.3
• /
• pp.18-28
• /
• 2001

세라믹스 부품의 실형상 제조기술은 실형상 성형기술과 더불어 반응소결기술의 발달에 의하여 거의 수축율이 제로인 기술로 발달하고 있다. 분말사출성형으로 대표되던 실형상 성형기술도 젤 캐스팅과 열경화 몰딩과 같은 화학적 성형기술의 도입에 따라 플라스틱과 같이 쉽게 부품을 성형할 수 있는 상태에 도달하고 있다. 특히, 나노분말의 실형상 성형은 화학적 방법에 의해서만 가능할 것으로 예상된다.

• Transactions of the KSME C: Technology and Education
• /
• v.1 no.2
• /
• pp.167-177
• /
• 2013

The use of mechanical anastomosis coupler instead of sutures has been increasing in microvascular anastomosis surgery. However, non-biodegradable anastomosis coupler has problems such as not only inflammatory reaction but also remaining permanently in operation wound. Therefore, we fabricated biodegradable anastomosis coupler using injection molding process to overcome the limitation of non-biodegradable anastomosis coupler. In various injection molding process conditions, the shrinkage was calculated with different cylinder temperatures and injection molding pressures and anastomotic strength was measured. As a result, changes in shrinkage hole part larger than the pin part. In addition, the shrinkage in the cylinder at higher temperatures increase. However, the higher the injection pressure, shrinkage tends to decrease, respectively. In-vitro degradation behavior of PCL anastomotic coupler evaluated for 12 weeks, water uptake was increased and molecular weight was accompanied by a reduction in mass of the biological degradation and reduction of anastomotic strength was confirmed. However, decreased levels of anastomotic strength enough to exceed the requirements of preclinical surgery, PCL microvascular anastomosis coupler suitable candidate materials that could identify.