Design Optimization of an Automotive Injection Molded Part for Minimizing Injection Pressure and Preventing Weldlines

사출압력 최소화와 웰드라인 방지를 위한 자동차용 사출성형 부품의 최적설계

  • Received : 2010.01.15
  • Accepted : 2010.08.05
  • Published : 2011.01.01

Abstract

Injection pressure is an important factor in filling procedure for injection molded parts. In addition, weldlines should be avoided to successfully produce injection molded parts. In this study, we optimally obtained injection molding process parameters that minimize injection pressure. Then, we determined the thickness of the part to avoid weldlines. To solve the optimization problem proposed, we employed MAPS-3D (Mold Analysis and Plastics Solution-3 Dimension), a commercial CAE tool for injection molding analysis, and PIAnO (Process Integration, Automation, and Optimization) as a commercial PIDO (Process Integration and Design Optimization) tool. We integrated MAPS-3D into PIAnO, automated the analysis and design procedure, and performed optimization by employing PQRSM (Progressive Quadratic Response Surface Method) equipped in PIAnO. We successfully obtained optimization results, which demonstrates the effectiveness of our design method.

Keywords

References

  1. W. J. Choi, H. C. Sin and S. W. Kwak, "Optimization of Processing Conditions in Injection Molding Using Genetic Algorithm," The Korean Society of Mechanical Engineers(A), Vol.24, No.10, pp.2543-2551, 2000.
  2. K. Park, J. H. Ahn and S. R. Choi, "Application of Design of Experiments and Numerical Analysis to Optimal Design for Injection Molding processes of Electrical Parts," The Korean Society of Mechanical Engineers(A), Vol.26, No.7, pp.1348-1356, 2002. https://doi.org/10.3795/KSME-A.2002.26.7.1348
  3. J. H. Kim, J. S. Lee and S. W. Cha, "The Optimization of Injection Molding System Using Axiomatic Approach," The Korean Society of Mechanical Engineers(A), Vol.27, No.6, pp.1020-1027, 2003. https://doi.org/10.3795/KSME-A.2003.27.6.1020
  4. C. H. Park, S. Y. Kim, D. H. Choi and B. G. Pyo, "Design Optimization for Minimizing Warpage in Injection Molding Parts with Numerical Noise," The Korean Society of Mechanical Engineers(A), Vol.29, No.11, pp.1445-1454, 2005. https://doi.org/10.3795/KSME-A.2005.29.11.1445
  5. J. H. Yoo and H. S. Kim, "A Study on Cavity Pressure and Tensile Strength of Injection Molding," Transactions of KSAE, Vol.2, No.6, pp.110-116, 1994.
  6. D. J. Choi and H. S. Park, "Optimization of Multi-component Injection Molding Process Based on Core-back System," Transactions of KSAE, Vol.17, No.2, pp.67-74, 2009.
  7. Mold Analysis and Plastics Solution-3D Dimension - MAPS-3D User's Manual, VMTech Co. Ltd., 2009.
  8. Progress Integration, Automation and Optimization - PIAnO User's Manual, FRAMAX Inc., 2009.
  9. Progress Integration, Automation and Optimization - PIAnO Tutorial, FRAMAX Inc., 2009.
  10. G. N. Vanderplaats, DOT-Design Optimization Tools Users Manual, Vanderplaats Research & Development, Inc., 1999.
  11. K. J. Hong, M. S. Kim and D. H. Choi, "Efficient Approximation Method for Constructing Quadratic Response Surface Model," KSME International Journal, Vol.15, No.7, pp.876-888, 2001.