• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.7
• /
• pp.809-815
• /
• 2016

In this paper, the electrical values of resistance, current, and voltage condition of reactivity is analyzed by applying the direct current (DC) voltage in medium for stem cell regeneration treatment. The voltage response by medium is related to electrical stimulation in the process of induction of differentiation for stem cell and the differentiation condition can be checked depending on the response of voltage condition. If the voltage level is lower in reacting response of a medium, the stem cell stimulation condition is stable, and if the voltage changing level is higher, the stem cell stimulation condition is unstable and a considerable loss will be resulted in the differentiation process. In this research, the optimization of electrical stimulation condition is expected for possible stem cell regeneration treatment.

• Journal of the Korean Chemical Society
• /
• v.23 no.3
• /
• pp.132-135
• /
• 1979

The thermal decomposition of a dilute mixture of 1,1,2,2,-$C_2H_2F_4$ in argon has been investigated in a single-pulse shock tube between 1146 and $1232^{\circ}K$ at total reflected shock pressures of about 3000 torr. Under these conditions the reaction proceeds exclusively by the molecular elimination of hydrogen fluoride. It has been found that the asymmetric isomer with the fully fluorinated ${\alpha}$-carbon requires the higher activation energy which may be attributed to the difference in atomic charge densities between isomers. The rate constant ratio is given by $log(k_1/k_2) = -0.069 {\pm} 0.021 ＋(1388{\pm}113) / 2.303RT$ in good agreement with previous independent studies.

• Applied Chemistry for Engineering
• /
• v.19 no.6
• /
• pp.645-651
• /
• 2008

In this study, the new solubility data at high pressure condition applicable to pre-combustion $CO_2$ capture system were found. Experiments were conducted within the temperature range of $40{\sim}80^{\circ}C$ while increasing the pressure from 0 to 50 bar. The effect of MDEA (N-methyldiethanolamine) concentration was studied by varying the concentration from 30 to 50 wt%. In order to improve the absorption rate of MDEA, piperazine was added in ranging of 5~10 wt% into the MDEA solution as a activator. From this experiment, the equilibrium partial pressure was increased with increasing MDEA concentration in absorbent and reaction temperature. Also absorption rate was increased with increasing the reaction temperature. It was noted that the mixture of piperazine and MDEA aqueous solution showed faster absorption rate by 2.5 times than only the MDEA aqueous solution with 40 wt% cencentration at initial reaction stage and also increased absorption capacity by 16%.

• Korean Chemical Engineering Research
• /
• v.45 no.5
• /
• pp.448-454
• /
• 2007

Hydrothermal synthesis was conducted with starting material as Barium hydroxide and hydrous titania ($TiO_2{\cdot}xH_2O$) to obtain barium titanate fine Powder. The conversion, crystal structure and properties of as-prepared powder were investigated according to reaction temperature, time and concentration. The effect of variables on conversion was in order of time < temperature < concentration and the maximum conversion reached to 99.5% in the case of hydrothermal synthesis at $180^{\circ}C$ for 2 h with 2.0 M reactant concentration. At low concentration such as 0.25 M, formation of unreacted $BaCO_3$ and $TiO_2$ was not inevitable at even high reaction temperature and these components converted into $BaTi_2O_5$ at high temperature and remained as impurity. As concentration of reactant increased, the size of as-synthesized $BaTiO_3$ powder deceased and Ba/Ti molar ratio approached into 1, showing Ba/Ti ratio of $1{\pm}0.005$ for reaction at $180^{\circ}C$ for 2 h with 2.0 M concentration.

• Korean Journal of Microbiology
• /
• v.35 no.2
• /
• pp.146-152
• /
• 1999

Acceplor reaction of glucosyltr~ansferase of Streptococcus ,SO~~-~IZLIS with f ~ ~ t o ~ y l o l i g o ~ a ~ ~ h a r i d e ~ was studied for the biosynthesis of novel olgisaccharides. First, bacilracin resistant mutants were selected by mutagenesis of Streptococcus sobrimis ATCC27351. Among these mutants 4 strains were selected by resistance to bacitracin and increase of glucosyltransferase. Acceptor reaction of maltose was analyzed by TLC and image analysis. There were differences in the specificity of the acceptor reaclion by Ule glucosylumsferase between mother strain (Streptococcus sobrinus ATCC2735) and bacitracin resistant mutants (Streptococcus sobrinus BR24C, Strepfococcus sobrinus CH-5). Molher strain did ilot show an acceptor reaction with fructosyloligosaccharides such as 1-keqtose and nystose. Acceptor reaction products of turailose and 1-kestose with glucosyltransferase (GW-S) of Streptococcus sobrini~s BR24C were TEX>\6^{3}$-$\alpha$-D-glucopyranosyl \3^{2}$-O-$\alpha$-D-fructose (glucose-fructose-glucose) and \6^{4}$-$\alpha$-D-glucopyranosyl \1^{3}$-$\beta$-D-~-h~ctofuranos~~ sucrose (glucose-glucosefructose- fructose). respectively These are novel oligosaccharides which can be produced only by enzymatic reaction.

• Journal of the Microelectronics and Packaging Society
• /
• v.19 no.1
• /
• pp.67-73
• /
• 2012

After flash memory card(FMC) was manufactured by $B^2it$ process, interfacial reaction of silver bump with thermal stress was studied. To investigate bonding reliability of Ag bump, thermal shock and thermal stress tests were conducted and then examined on the crack between Cu land and Ag bump interface. Diffusion reaction of Ag bump/Cu land interface was analyzed using SEM, EDS and FIB. The Ag-Cu alloy layer due to the interfacial reaction was formed at the Ag/Cu interface. As the diffusivity of Ag ${\rightarrow}$ Cu is faster than Cu ${\rightarrow}$ Ag, a lot of (Cu, Ag) alloy layers were observed at the Cu layer than Ag. These alloy layers contributed to increase the Cu-Ag bonding strength and its reliability.

• Food Engineering Progress
• /
• v.13 no.4
• /
• pp.348-351
• /
• 2009

In this study, the effects of gums (guar gum, xanthan gum, locust beam gum) on the activity of polygalacturonase(PGase) were examined. PGase activity was assayed by measuring the release of reducing groups from polygalacturonic acid. Guar gum, xanthan gum and locust bean gum were capable of increasing the catalytic activity of the PGase by 105%, 87% and 90%, respectively. Carrot was macerated by Macerozyme R-200 with gums and the yield of the maceration reaction for the production of carrot single cells was increased up to 13% in the presence of guar gum. This suggested that gums stated above can be used as good enhancers not only for the catalytic activity of the PGase but also for the production of carrot single cell.

• Resources Recycling
• /
• v.29 no.6
• /
• pp.35-40
• /
• 2020

In this study were carried out basic experiments mainly to investigate important reaction mechanism, the reaction temperature, time and the addition amount of Zn in recycling of waste cemented carbide by the zinc bath process. As a result, it was required that the Zn bath reaction was heated more than at 800℃ to accelerate reaction of melted Zn and Co inside of wasted cemented carbide. Furthermore, thickness of the waste cemented carbide was reduced linearly according to increase of reaction time at 700℃ for 0.5~2h in the zinc bath reaction. Also the zinc bath reaction was examined that heating in lower than at 800℃ for 3h and then heated more than at 900℃ for 1h(above 3.0×10 torr-2 vaccum) was suitable to reduce vapour loss amount of Zn in the zinc bath process.

• Korean Chemical Engineering Research
• /
• v.49 no.2
• /
• pp.168-174
• /
• 2011

Various La-based perovskite catalysts were prepared by a Pechini method, and they were applied to the low-temperature oxidation of odor compounds exhausted from waste food treatment process for effective deodorization. Quantitative and qualitative analyses of exhausted gas were conducted to measure the amount of major odor compounds with respect to operation time. A standard odor sample composed of major odor compounds was then prepared for use as a feed for oxidation reaction system. Various transition metal(M)-substituted La-based perovskite catalysts ($LaMO_{3}$: M=Cr, Mn, Fe, Co, and Ni) were prepared and applied to the oxidation of odor compounds in order to investigate the $LaNiO_3$ catalyst showed the best catalytic performance. Pt-substituted perovskite catalysts ($LaNi_{1-x}Pt_{x}O_{3}$: x=0, 0.03, 0.1, and 0.3) were then prepared for enhancing the catalytic performance. It was found that $LaNi_{0.9}Pt_{0.1}O_{3}$ catalyst served as the most efficient catalyst. Supported perovskite catalysts ($XLaNi_{0.9}Pt_{0.1}O_{3}/Al_{2}O_{3}$: X=perovskite content(wt%), 0, 10, 20, 30, 40, 50, and 100) were finally applied for the purpose of maximizing the catalytic performance of perovskite catalyst in the low-temperature oxidation reaction. Catalytic performance of $XLaNi_{0.9}Pt_{0.1}O_{3}/Al_{2}O_{3}$ catalysts showed a volcano-shaped curve with respect to perovskite content. Among the catalysts tested, $20LaNi_{0.9}Pt_{0.1}O_{3}$/$Al_{2}O_{3}$ catalyst exhibited the highest conversion of odor compounds of 88.7% at $180^{\circ}C$.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.11
• /
• pp.1213-1221
• /
• 2006

In this study, granular sludge used in an anaerobic process treating brewery waste was inoculated in a laboratory scale of reactor to induce anaerobic ammonium oxidation(ANAMMOX). The reactor was operated with synthetic wastewater, which prepared at 1:1 ratio of $NH_4^+-N$ over $NO_2^--N$. Changes in nitrogen concentration, COD, alkalinity and gas production were analyzed. There are 3 phases of spanning in experimental period according to influent nitrogen concentration. In the Phase 1, each of the concentration of $NH_4^+-N$ and $NO_2^--N$ were increased from 1.91 $gN/m^3{\cdot}d$ to 14.29 $gN/m^3{\cdot}d$. Ammonium nitrogen loading(same as nitrite nitrogen) was 23.81 $gN/m^3{\cdot}d$ in the Phase 2 and 19.05 $gN/m^3{\cdot}d$ in the Phase 3, respectively $NO_2^--N$ has been removed up to 99% during whole period while the removal efficiency of $NH_4^+-N$ was significantly varied. In Phase 2, $NH_4^+-N$ was removed up to 75%. Microorganisms varied temporally through three phases were characterized by 16s rDNA analysis methods. ANAMMOX bacteria were dominantly found in phase 2 when the removal rate of $NO_2^--N$and $NH_4^+-N$ was the highest up to 99% and 75%, respectively. Due to erroneous exposed to air, the removal efficiency of $NH_4^+-N$ was unexpectedly lowered, but ANAMMOX bacteria still existed.