• Title/Summary/Keyword: 반사모드

Search Result 302, Processing Time 0.041 seconds

Effects of a Submerged Block on the Sloshing of a Fluid in Rectangular Tanks (수중블럭이 사각형탱크의 자유수면 유동에 미치는 영향)

  • Choun, Young-Sun;Yun, Chung-Bang
    • Proceedings of the Computational Structural Engineering Institute Conference
    • /
    • 1994.10a
    • /
    • pp.191-200
    • /
    • 1994
  • 사각형 유체저장탱크의 바닥에 놓여져 있는 사각형 블럭의 크기 및 위치가 자유수면의 유동진동수와 모드형상에 미치는 영향에 대하여 선형파이론을 적용하여 검토하였다. 유체의 영역을 3부분으로 나누고 각 영역에서의 속도포텐셜을 입사파와 블럭으로 인해 발생되는 반사파 및 전달파의 항으로써 표현하였다. 그리고 블럭에 의한 파의 반사율과 전달율은 유체영역의 경계에서 속도포텐셜과 유체입자의 속도가 연속인 조건을 사용하여 구하였다. 연구결과 블럭의 높이와 폭은 자유수면의 고유진동수에 크게 영향을 미치며 높이와 위치는 모드형상에 주로 영향을 준다. 블럭이 높고 폭이 넓을수록 고유 진동수는 감소하며 블럭이 높고 탱크의 벽면으로 이동할수록 모드형상은 크게 변한다.

  • PDF

Improvement of Hologram Dencity using a Micro-Mirror Surface (마이크로 미러 표면을 이용한 홀로그램 저장 밀도의 향상)

  • 양병춘
    • Proceedings of the Optical Society of Korea Conference
    • /
    • 1998.08a
    • /
    • pp.92-93
    • /
    • 1998
  • 폴리 실리톤으로 제작된 마이크로 미러의 표면에서 반사되는 스펙클을 이용하여 홀 로그램을 기록하였다. 마이크로 미러에서 반사되는 스펙클 패턴은 다중모드 광섬유에서 관 측할 수 있는 스펙클과 거의 비슷한 형태로 보이며 이를 이용하여 홀로그램의 기록밀도를 향상시킬수 있음을 보였다.

  • PDF

Oscillation Mode and Grating Phase in DFB Laser Diode with an Anti-reflection Coated Mirror (무반사 코팅된 DFB 레이저 다이오드에서 발진 모드와 격자 위상)

  • Kwon, Keeyoung;Ki, Janggeun
    • The Journal of the Convergence on Culture Technology
    • /
    • v.8 no.5
    • /
    • pp.483-488
    • /
    • 2022
  • In this paper, when a gain grating and a refractive index grating exist simultaneously in a DFB laser diode having a wavelength of 1.55 ㎛, an anti-reflection coating is applied to the right mirror surface so that ρr=0. In case of δL<0, the characteristics of the oscillation frequency and oscillation gain have been analyzed. Whenever the phase of the grating on the left side of the mirror continuously decreases by π/2, the δL value of each oscillation mode decreases by about 0.6 to the left of the graph lines of each oscillation mode. The case of the oscillation mode having the lowest threshold gain is the case of κL=10, and in this case, the mode selectivity is relatively low compared to the case of other values of κL. From κL=0.1 to κL=6, the mode selectivity and the frequency stability are excellent. As the mode selectivity is excellent, the frequency stability is excellent. Compared to the case with two cleaved mirrors, the DFB laser diode with anti-reflection coating increases the threshold gain of the oscillation mode by about 2 times, but the mode selectivity becomes about 2 times better.

Anti-reflection coating on the facet of a spot size converter integrated laser diode using a pair of TiO2 and SiO2 thin films (TiO2와 SiO2 박막 쌍을 이용한 광모드 변환기가 집적된 반도체 레이저 단면의 무반사 코팅)

  • 송현우;김성복;심재식;김제하;오대곤;남은수
    • Korean Journal of Optics and Photonics
    • /
    • v.13 no.5
    • /
    • pp.396-399
    • /
    • 2002
  • Using a bi-layer anti-reflection coating of $TiO_2$and $SiO_2,$ we have achieved a minimum facet reflectivity of $~10^{-5}$ and a band width of 27 nm for a reflectivity of $~10^{-4}$ or less for 1.3 $\mu\textrm{m}$ spot size converter integrated semiconductor lasers. This coating is applicable to external-cavity-tuned laser sources and semiconductor optical amplifiers.

Effect of Grating Phase in DFB Lasers with an Anti-reflection Coated Mirror (AR 코팅된 DFB 레이저에서 격자 위상의 영향)

  • Kwon, Kee-young;Ki, Jang-geun;Cho, Hyun-mook
    • The Journal of the Convergence on Culture Technology
    • /
    • v.7 no.3
    • /
    • pp.463-468
    • /
    • 2021
  • In this paper, when a refractive index grating and a gain grating were simultaneously present in a DFB laser having a wavelength of 1.55 ㎛, a dielectric film coating was applied so that reflection did not occur on the right mirror surface, so that 𝜌r=0. In case of 𝛿L>0, the characteristics of the oscillation frequency and oscillation gain were analyzed. When the grating phase of the left mirror surface continues to decrease from 𝜋, the graph lines of each mode gradually shift to the left. In case of 𝜅L=10, the threshold gain of the oscillation mode is the lowest. In this case, the mode selectivity is relatively low. From 𝜅L=0.5 to 𝜅L=6, the mode selectivity and the frequency stability are excellent. In the case of DFB lasers with an anti-reflection coated mirror, the threshold gain of the oscillation mode increases but the mode selectivity is about twice as excellent, compared with DFB lasers of having two cleaved facets.

The simulation results of a dual-mode equalizer applicable to Digital CATV system (디지털CATV시스템에서 사용 가능한 이중모드 등화기의 모의실험 결과)

  • Lee, Jae-Ho;Kwon, O-Hyung;Lee, Soo-In
    • Proceedings of the Korean Society of Broadcast Engineers Conference
    • /
    • 2005.11a
    • /
    • pp.113-116
    • /
    • 2005
  • 본 논문은 DOCSIS(Data Over Cable Service Interface Specifications)를 기반으로 하는 디지털 CATV(Cable TV)의 케이블 모뎀에서 적용이 가능한 이중모드 등화기의 모의실험 결과에 관한내용이다. 케이블 모뎀의 등화기는 훈련심벌이 없으므로 수신된 심벌을 가지고 채널을 보상하며 처음에는 블라인드 모드로 동작하다가 특정한 임계값보다 작을 경우 결정 지향 모드로 동작하는 이중모드구조를 가진다. 본 논문에서 AWGN과 rummler 채널을 사용하였으며, 64QAM과 256QAM에 대해 rummler 채널의 반사파 이득을 변화해 가면서 케이블 모뎀의 BER(Bit Error Rate)를 모의실험하였다. 또한 이중모드 등화기의 탭 수를 변화해 가면서 케이블 모뎀의 BER을 조사하였으며 fractionally spaced 이중모드 등화기와 symbol spaced 이중모드 등화기의 BER을 조사하였으며 FBF(Feedback Filter)의 유무에 따른 BER도 조사하였다.

  • PDF

A Study on the Design of Laterally Tilted SCH-SLD with Window Region (윈도우 영역을 갖는 측방향으로 경사진 SCH-SLD의 설계에 관한 연구)

  • 황상구;김정호;김운섭;김동욱;안세경;홍창희
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.5 no.4
    • /
    • pp.777-790
    • /
    • 2001
  • Theoretical analyses have been tried to design high power and stable operating SLD at 1.55${\mu}{\textrm}{m}$ wavelength range which is the lowest absorption wavelength in optical fiber. The materials of active layer and SCH layer were chosen as conventional In1-xGaxAsyPl-y quaternary composition systems. From the transverse mode and the lateral mode analyses of waveguide, the optical power distributions and the optical confinement factor have been studied for single-mode high power operation. According to these analyses, it was calculated the composition and the thickness of SCH layer to obtain the maximum optical confinement factor. In order to obtain low values of the reflectivity, we used the window region and the lateral tilted angle between tile active region and window region. And the reflectivity of SLD was calculated with the gaussian beam approximation and mode analysis. From these researches, it was confirmed for several results to fabricate the efficient and stable SLD. In case of using $1.3\mum$, InGaAsP SCH layer, the layer thickness was obtained $0.08\mum$, to get the maximum optical confinement factor. Using $0.2\mum$, active layer thickness and $0.08\mum$, SCH layer thickness, the window region length is about $100\mum$ without An coating, $10\mum$ in 1% AR coating to obtain about 10-4 reflectivity. When the tilted angle is about $10~15^{\circ}$, the reflectivity is about 10-3. From these results, if the window region length and tilted angle were controlled appropriately in given device structure, it was confirmed that it is possible to fabricate the stable SLD without AR coating analytically.

  • PDF

A Study on Design of Multimode Feed Horn Antenna for High Power Microwave Antenna System (초고출력 안테나 시스템 급전용 다중 모드 혼 안테나 설계에 관한 연구)

  • Lee Sang-Heun;Yoon Young-Joong;Lee Byoung-Moo;So Joon-Ho
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.17 no.5 s.108
    • /
    • pp.476-482
    • /
    • 2006
  • In this paper, a multimode feed horn antenna is suggested for a high power microwave(HPM) antenna system. The proposed HPM feed horn antenna which is connected with a mode converter is located between source and reflector antenna. A multimode feed horn antenna which has reduced -25 dB beamwidth is designed and fabricated for miniaturization of reflector antenna because -25 dB beamwidth which is determined by considering spillover of feed horn antenna decides a size of reflector in case of HPM. As a result, feed system which uses the multimode feed horn antenna has high gain about 27 dBi and return loss is less than -22 dB at 10 GHz. The measured -25 dB beamwidths of the radiation pattern at vertical, horizontal-plane equal to $20.24^{\circ},\;28.92^{\circ}$ which is less than about $10^{\circ}$ beamwidth of conventional feed system. Thus the suggested feed hem antenna is suitable to feed horn for miniaturization of HPM antenna system.

Analysis of Electromagnetic Scattering by a Perfectly Conducting Strip Grating on Dielectric Multilayers (다층 유전체 위의 조기적인 도체 스트립 구조에 의한 전자파산란 해석)

  • 윤의중;양승인
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.8 no.2
    • /
    • pp.161-172
    • /
    • 1997
  • In this paper, electromagnetic scattering by a perfectly conducting strip grating on dielectric multilayers is analyzed for the normalized reflected and transmitted power by applying the Fourier-Galeakin moment method. The induced current density is expanded in a series of multiplication of chebyshev polynomials of the first kind and functions with appropriate edge boundary condition, the continuous condition of electromagnetic field is applied in the boundary planes. The confirm the validity of the proposed method, the nor- malized reflected and transmitted power obtained by varying the relative permittivity and thickness of each dielectric layers are evaluated and compared with those of the existing numerical method and a paper, and then the numerical results in this paper are in good agreement with those of the existing numerical method and the paper. The sharp variation position in the geometrically normalized reflected and transmitted power can be moved by the incident angle, grating period, and the relative permittivity and thickness of the dielectric multilayers, these sharp variation points which are called the Wood's anomaly of the Geome- trically normalized reflected power are observed as a main factor when the reflected powers of the higher order mode are transitted between propagating and evanescent modes, and the local minimum positions are slightly moved to the left hand direction in which grating period is getting small according to the increase of the relative permittivity of dielectric layers.

  • PDF

A Reconfigurable Power Divider for High Efficiency Power Amplifiers (고효율 전력 증폭기를 위한 재구성성이 있는 전력 분배기)

  • Kim, Seung-Hoon;Chung, In-Young;Jeong, Jin-Ho
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.20 no.2
    • /
    • pp.107-114
    • /
    • 2009
  • In this paper, high efficiency amplifier configuration is proposed using the reconfigurable power divider. In order to enhance average efficiency of linear power amplifiers for wireless communication, it is required to increase efficiency in low output power region. The proposed power divider operates in two modes, high power mode and low power mode, according to output power. In each mode, it allows impedance matches and low loss, which is made possible by employing two $\lambda/4$ coupled lines and two switches. The fabricated power divider shows the return loss ($S_{11}$) and insertion loss ($S_{21}$) of -16.49 dB and -0.83 dB, respectively, in low power mode. In high power mode, the measured return loss ($S_{11}$) and insertion loss ($S_{31}$) are -16.28 dB and -0.73 dB, respectively. This result successfully demonstrates the reconfigurability of the proposed power divider.