• Journal of the Korean Society for Marine Environment & Energy
• /
• v.15 no.1
• /
• pp.25-29
• /
• 2012

In this paper, in order to measure the degree of degradation using the reflection coefficient of the probe, the measuring circuit is designed. we put pulse signal into the probe and measure the reflected signal in the circuit. As the condition of engine oil degradation, we can see that the reflected signal was increased and as the engine oil temperature increases, a phenomenon shows that the degradated dielectric constant is decreased. Finally, the theoretical values and measured values of the reflection coefficients of the probe are analyzed.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.243-247
• /
• 2010

본 연구에서는 단일 부유식방파제의 소파성능을 알아보기 위해 CADMAS-SURF를 이용한 수치모형실험을 실시하였다. 부유식방파제는 단일 직사각형으로 구성하여 동일 형상의 수중방파제가 배치된 경우와 부유식방파제와 수중방파제가 동시에 배치된 경우의 소파성능을 비교하였다. 소파 성능을 평가하는 지표로써 투과계수 및 반사계수를 산정하여 이를 파형경사에 대하여 검토하였다.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2001.10a
• /
• pp.150-155
• /
• 2001

단일 소파막에 대한 파도 반사문제와 투과. 또 이중으로 설치된 소파막에 대한 반사와 투과문제에 대한 양함수 해를 도출하였다. 단일 막에 대한 파도의 반사가 에어리 파의 해당 벽에 의해서만 입자반사로서 일어난다고 보고 이를 원거리 파도에너지와 일치시켜 반사 파고를 얻었다. 이중 막에 대해서는 각각의 파도가 독립적으로 단일 막에 의해서 반사 또는 투과가 되고 이들이 중첩되어 전체 파고가 형성되어지는 것으로 간주하여 전체 반사계수와 투과계수를 결정하였다. 단일 막에 대한 투과계수의 결과는 정성적으로 다른 계산결과와 비슷한 경향을 보이며, 실험결과보다는 높게 예측되었다. 이중 단일 막에 대한 결과는 낮은 주파수에서 실험결과와 유사한 경향을 보이고, 중간 주파수에서 완만한 감소를 보였다. 계산이 양함수 해로 얻어지므로 개념설계와 현장에서 유용하게 활용될 수 있으리라 기대된다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1995.10a
• /
• pp.68-73
• /
• 1995

반사음이 포함된 신호의 계측을 통하여 원음의 크기와 반사계수의 크기, 지연시간 등의 추출을 수치적 예를 사용하여 규명해 보았다. 반사계수의 측정시, 폐쇄된 음장에서는 정상파비로 표시되는 단일 주파수 신호를 사용하는 것이 실제 계측시 가장 손쉬운 방법이며, 광역의 주파수 성분에 걸쳐 그 값을 파악할 필요가 있는 경우에는 켑스트럼 상에서 반사파의 효과가 원음과 확연히 구분되는 신호를 사용하는 것이 신호처리 과정에서 불필요한 부담을 제거시켜 준다. 개방 음장에서는 반사파가 1개 밖에 포함되지 않으므로 이 경우에는 PSD 상의데이터 처리를 통하든지 또는 캡스트럼의 재편집을 통하여 원음의 크기와 성분 그리고 반사계수 등을 손쉽게 추출해 낼 수 있다. 광대역 주파수 성분을 가진 음원을 계측에 사용할 경우에는 comb lifter의 적용에 보다 세심한 주의를 기울일 필요가 있으며 켑스트럼 상의 추가 충격응답함수의 식별에 보다 더 합리적인 방법이 강구되어야 할 것이다.

• The Journal of the Acoustical Society of Korea
• /
• v.34 no.6
• /
• pp.493-498
• /
• 2015

Complex acoustic signals can be formed in a water-filled acoustic pulse tube under some exciting conditions. It makes difficult to measure plane-wave reflection coefficient with the pulse tube for low frequency bands. In this study, using COMSOL Multiphysics we show that the tube wall excitation generates complex acoustic field of nonplanar mode as well as planar one. From such field incident or reflected planar mode can be decomposed respectively with a modal decomposition method, two-dimensional Fourier filtering. It makes possible to more accurately determine the plane-wave reflection coefficient of acoustic specimen with time gating.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.31 no.6
• /
• pp.403-408
• /
• 2019

In general, the caisson having the perforated wall is used to for the purpose of reducing the wave reflection and wave overtopping. In this study, the hydraulic characteristics (reflection coefficient) of the perforated wall caisson chamber filled with aggregates (rocks) were investigated with hydraulic model tests. When the perforated wall chambers were filled with aggregates, the reflection coefficients would increase. However, it was confirmed that the rock filling method into the perforated wall chamber could secure the stability of the structures and satisfy the hydraulic characteristics at a certain level.

• The Journal of the Acoustical Society of Korea
• /
• v.27 no.3
• /
• pp.129-139
• /
• 2008

The purpose of the present work is to derive the reflection and transmission coefficients of $S_0\;and\;A_0$ mode Lamb waves in relation to the geometry of a rectangular notch when the waves propagate across the notch in an elastic plate. Firstly, the excitable modes of the Lamb wave were analyzed with respect to the plate thickness. The scattering phenomena were divided into three independent processes according to the boundary shape of the notch and the direction of the wave propagation. Linear equations for each process were derived with corresponding free or continuous boundary conditions to analyze the scattered waves. By the rule of linear superposition, the waves scattered at each process were summed for each mode. Then the steady-state reflection and transmission coefficients of the scattered waves were determined so that the difference of energy flux between the incident and the scattered waves would remain within 4%.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.5
• /
• pp.17-24
• /
• 2000

Complex permittivity of dry sand is measured by using an open-ended coaxial probe, which was self-designed and manufactured. As a simple calibration scheme of the probe, the phase difference between the measured and the calculated reflection coefficients of pure water is subtracted from the phase of the measured reflection coefficient for dry sand. And then the complex permittivity of dry sand is reconstructed by applying its measured reflection coefficient into an improved imaginary transmission-line model. The accuracy of our measurement scheme is verified by showing that its reconstructed complex permittivity approaches the precise value of dry sand.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.6 no.1
• /
• pp.10-16
• /
• 1995

The E-polarized scattering problems by a perfect conductor strip grating are analyzed by the method of moments. For an E-polarization the induced surface current density is expected to blow up at the strip both edges. Then the induced surface current density on the strip is expanded in a series of multiplication of Ultraspherical ploynomials with zeroth order and functions with appropriate edge boundary condition. The numerical results for current density and reflection cofficient are compared with other functions, it is shown that numerical results better improves the convergence of the moment method soulutions with general incident angles than the existing several other functions. The sharp variation points in the magnitude of geometric-optical reflection coefficient can be moved by varying the incident angle, strip width, and strip spacing.

• The Journal of the Acoustical Society of Korea
• /
• v.22 no.1
• /
• pp.7-13
• /
• 2003

Numerous investigations have demonstrated that diffused reflection is one of the most important factors in predicting room acoustics by computer simulation. Recent studies have suggested several computational algorithms in order to account for diffused reflections in the ray tracing or beam tracing method. In this study, a computational algorithm for the calculation of diffuse sound reflections in the image method is suggested and a computer simulation system is developed based on the suggested algorithm. The methodology adopted in our computer simulation system is similar to the extended radiosity method, which is developed for the computer graphics. In a real room, sound energy is reflected in a partially diffused manner which results in four reflection combinations: diffuse-diffuse, specular-specular, diffuse-specular and specular-diffuse. In this study, higher order form factor is introduced to handle the four types of reflection combinations so that the partially diffused reflection could be modeled. In this paper, the concept of extended radiosity method is described and the approximate method of calculating higher order form factor is suggested. Finally, the effect of higher order form factors on the simulation of reverberation time is investigated.