• Journal of the Society of Naval Architects of Korea
• /
• v.46 no.5
• /
• pp.498-509
• /
• 2009

Present study is concerned with the simulation of plasticity models for the cyclic stressstrain behavior of aluminum alloy AC4C-T6 that can be used for primary materials of LNG cargo pump. Material model of cyclic hardening and plasticity for aluminum alloy AC4C-T6 was investigated through experiments and numerical simulations. Monotonic tensile and cyclic tension-compression test under symmetric load cycles was performed at both room temperature and cryogenic temperature of $-165^{\circ}C$. Based on the experimental data plastic hardening models were evaluated for isotropic/kinematic/combined hardening. FEA (Finite Element Analysis) models which describe the cyclic stress-strain relationship were evaluated for the simulation of plasticity. An appropriate hardening model is proposed comparing the results of FEA with those of experiments.

• Clinical and Experimental Pediatrics
• /
• v.46 no.9
• /
• pp.913-917
• /
• 2003

Cardiac rhabdomyomas are relatively uncommon and associated with tuberous sclerosis in 40-50% cases. We report a 10-month-old infant with tuberous sclerosis who presented with ventricular arrythmias and status epilepticus. There were hypopigmented macules on the body, periventricular calcifications, renal cyst and cardiac rabdomyomas just below the aortic valve. The patient required resection of left ventricular subaortic masses due to sustained arrythmia in spite of intravenous amiodarone therapy. The pathologic examination confirmed the diagnosis of rhabdomyoma. The patient had no more arrythmia during the 14 month follow up period. Although cardiac rhabdomyomas may spontaneously regress, surgery is often necessary and frequently resolves the underlying arrythmia.

• Journal of Welding and Joining
• /
• v.12 no.4
• /
• pp.151-161
• /
• 1994

FCAW has wide application in ship fabrication, maintenance and field erection. It has many advantages over SMAW.SAW and GMAW process. In many applications, the FCAW provides highquality weld metal. This method can reduce weld defects especially porosity and spatter. But the fatigue characteristics of those deposited metal have been rarely investigated. The purpose of this study is to investigate the cyclic stress-strain behavior and fatigue tests by the constant strain control were carried out on the rounded smooth specimen with deposited metal using the metal type flux cored wire. As the results of this study for the deposited metal welded by the metal type flux cored wire, the hardening or softening characteristics under cyclic load were investigated and cyclic stress-strain curve, strain-fatigue life curve, stress-strain function and fatigue life relation which are useful to estimate the fatigue life under the stress concentration condition were obtained.

• The Korean Journal of Rheology
• /
• v.10 no.4
• /
• pp.227-233
• /
• 1998

The effects of 1 mol% N-benzylpyrazinium hexafluoroantimonate(BPH) as a thermal latent initiator and blend compositions composed of cycloaliphatic and DGEBA epoxies were investigated in the rheological properties and cure kinetics. Latent properties were performed by measurement of the conversion as a function of reaction time using isothermal DSC at $150^{\circ}C$ and $50^{\circ}C$ Rheological properties of the blend systems were investigated in terms of isothermal experiments using a rheometer. The gelation time was obtained from the evaluation of storage modulus (G'), loss modulus (G") and damping factor (tan$\delta$)). Cross-linking activation energy ($E_c$) was also determined from the Arrhenius equation based on gel time and curing temperature. As a result, the gel time and cross-linking activation energy increased with increasing DGEBA composition. The cure activation energies ($E_a$) were obtained by Kissinger method using dynamic DSC thermograms. In this work, the cure activation energy decreased with increasing CAE concentration, which might be resulted from the short repeat units, simple side-groups and viscosity of reaction media.edia.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.2
• /
• pp.207-212
• /
• 2016

High-frequency induction hardening (HFIH) is used in many industries and has a number of advantages, including reliability and repeatability. It is a non-contact method of providing energy-efficient heat in the minimum amount of time without using a flame. Recently, HFIH has been actively studied using the finite-element method (FEM), however, these studies only focused on the accuracy of the analysis. In this paper, we analyzed HFIH by using a variable frequency based on the conditions of the same shape and input power then comparing the analysis results to experimental results. The analysis and experimental results indicate that the hardening depths are approximately the same using the optimal frequency of 3kHz.

• Computational Structural Engineering
• /
• v.5 no.1
• /
• pp.119-132
• /
• 1992

The objective of this study is to perform extensive parametric studies of the lateral-torsional buckling of short 1-beams under repeated loadings, and to gain a further insight into the lateral-torsional beam buckling problem. A one-dimensional geometrically (fully) nonlinear beam model is used, which includes superposed infinitesimal transverse warping deformation in addition to finite torsional warping deformation. A multiaxial cyclic plasticity model is also implemented to better represent cyclic metal plasticity in conjunction with a consistent return mapping algorithm. The general response for the lateral-torsional buckling of short I-beams under repeated loadings is examined through several parametric studies around the standard case : the material yield strength, the yield plateau, the strain hardening, the kinematic hardening, the residual stresses, the load eccentricity with respect to the shear center, the height of the load with respect to the cross-section of the beam, the location of the load along the length of the beam, the dimensions of the cross-section of the beam and the fixity of the supported end remote from the load.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.1
• /
• pp.9-14
• /
• 2017

In the present work, a mechanical performances under cyclic loading in RC (Reinforced Concrete) beams with normal steel and FRPH (Fiber Reinforced Plastic Hybrid) bar are investigated. For the work, RC beam members with $200{\times}200{\times}2175mm$ of geometry and 24 Mpa of design strength are prepared, and 4-point-bending tests are performed for evaluation of cracking, yielding, and ultimate loads. Through static loading test, 48.9kN and 36.0 kN of yielding loads are measured for normal RC and FRPH beam, respectively. They have almost same ultimate load of 50.0 kN. Typical tension hardening behavior is observed in FRPH beam, which is caused by the behavior of FRPH bar with tension hardening. In cyclic loading conditions, FRPH beam has more smaller crack width and scattered crack pattern, and it shows more elastic recovery than normal RC beam. The energy dissipation ratio in FRPH beam is 0.83, which is greater than 0.62 in normal RC beam and it shows more effective resistance to cyclic loadings.

• Proceedings of the KOR-BRONCHOESO Conference
• /
• 1993.05a
• /
• pp.108-108
• /
• 1993

Cystic hygroma is a congenital anomaly of the lymphatic system for which the exact pathogenetic mechanism remains to be elucidated. It is filled with lymphatic fluid and commonly present in the cervical area in either single isolated or multiple form. It is usually innocuous without any pain but may be life-threatening when it is large enough to compromise the airway or interfere with swallowing. Since spontaneous regressions rarely occur, it requires surgical removal. However, this may be rendered difficult in multiple forms and in those with extensive infiltration into the surrounding tissue. This is a presentation of 10 pediatric patients with cystic hygroma who have been successfully treated by sclerotherapy using bleomycin at the authors' department.

• Magazine of the Korea Concrete Institute
• /
• v.4 no.3
• /
• pp.157-166
• /
• 1992

해수환경하의 콘크리트 구조물은 동결융해의 반복에 의한 물리적인 침식과 해수중에 용존하는 각종의 이온들의 침투로 인한 화학적 침식에 의해 현저한 성능저하현상을 나타내는 것으로 알려져있다. 본 연구는 포졸란계 혼합재인 플라이 애쉬, 슬래그, 슬리카 흄과 폴리머계 혼합재인 Ethylene Vinyl Acetate(EVA), Styrene-Butadiene Rubber(SBR)를 사용하여 제조한 콘크리트 경화체의 해수환 경하에서 동결융해 저항성에 미치는 혼합재의 종류 및 첨가량의 영향, W/C의 영향을 비교 검토한 실험적 연구이다. 콘크리트의 동결융해 저항성을 위해서는 공기연행이 필수적이며, 공기연행시킨 경우 W/C가 낮을수록 동결융해 저항성이 우수하였다. 해수중에서의 동결융해 저항성은 슬래그분말을 첨가할 때 우수하였으며, 폴리머계 혼합재에서는 EVA가 우수한 결과를 나타내었다.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2010.05a
• /
• pp.24.2-24.2
• /
• 2010

고분자 몰드를 이용한 nanoimprint lithography (NIL)는 고분자소재의 유연성과 투명성으로 인하여, 유기전자소자나 유연한 디스플레이소자 등 다양한 응용이 가능하다. 하지만, 고분자소재는 일반적으로 열저항성과 내구성이 낮아서, 고분자 몰드를 이용한 패턴형성 시, 자외선 경화방식이 주로 사용된다. 만약 복제가 쉽고, 가격이 저렴하며, 열저항성과 내구성이 강한 고분자 몰드를 제작한다면, thermoplastic-NIL 기술에 적용할 수가 있기 때문에, 고온을 요구하는 소자의 패턴형성 공정에 사용 가능하다. 본 연구에서는 이러한 고분자 몰드 제작을 위하여, 열저항성과 내구성이 강한 polyimide 필름과 polyurethane acrylate (PUA)를 기반으로 제작된 resin을 이용하였다. 먼저 Polyimide 필름 위에 자외선 노광을 사용하여, PUA resin 을 경화시킴으로써 패턴을 형성하였다. 이렇게 만들어진 몰드를 thermoplastic-NIL기술에 적용함으로써, Si 기판 위에 sub-마이크로 급 패턴을 형성하였다. 또한, 제작된 고분자 몰드를 사용하여 반복적인 NIL 공정을 수행함으로써 몰드의 내구성을 확인하였으며, 곡면 기판 위에 NIL을 함으로써 몰드의 유연성을 확인 할 수 있었다.