• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.6
• /
• pp.3383-3388
• /
• 2014

An experimental study was performed to compare the characteristics of the combustion pressure and exhaust emissions in the case of using pure diesel when the EGR rate was changed in a CRDI 4-cylinder diesel engine with those using biodiesel blended and pure diesel fuel. In this study, the EGR rate variation were conducted at an engine speed of 2000rpm with fuel with a biodiesel blended rate of 20%. The combustion pressure of the biodiesel blended rate 20% and pure diesel fuels decreased with increasing EGR rate. The IMEP of biodiesel was higher than that of ULSD (Ultra low sulfur diesel). The emission results showed that the NOx emission of biodiesel blended fuel with increasing EGR rate was higher than that of ULSD. In addition, the NOx emission of biodiesel blended and diesel fuel decreased with increasing EGR rate. The CO and soot, $CO_2$ emissions increased with increasing EGR rate, and the CO and soot emissions from the biodiesel blended fuel were lower than that of ULSD but the $CO_2$ emissions were higher.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.579-584
• /
• 2007

대두유로부터 생산된 바이오디젤과 바이오디젤 혼합 연료유를 대상으로 지방산메틸에스터 함량과 화학적 분석을 통해 산화 특성과 오일의 수명 예측 연구를 수행하였다. 바이오디젤, 경유, BD5, BD20은 산화가 진행될수록 산가(Acid number), 동점도(Kinematic Viscosity) 및 밀도(Density)는 증가하였다. 산가 측정결과의 활용에 의해 임의의 온도조건에서 정확한 사용수명을 예측하기 위하여 화학속도론에 의거하여 각각의 연료에 대한 사용수명식을 도출하였다. 도출된 사용수명식으로부터 바이오디젤이 가장 빠르게 산화가 진행되었고 바이오디젤 혼합량이 증가할수록 사용수명이 단축되는 것을 확인할 수 있었다.

• New & Renewable Energy
• /
• v.3 no.2 s.10
• /
• pp.17-23
• /
• 2007

대두유로부터 생산된 바이오디젤과 바이오디젤 혼합 연료유를 대상으로 지방산메틸에스터 함량과 화학적 분석을 통해 산화 특성과 오일의 수명 예측 연구를 수행하였다. 바이오디젤, 경유, BD5, BD20은 산화가 진행될수록 산가(Acid number), 동점도(Kinematic Viscosity) 및 밀도(Density)는 증가하였다. 산가 측정결과의 활용에 의해 임의의 온도조건에서 정확한 사용수명을 예측하기 위하여 화학속도론에 의거하여 각각의 연료에 대한 사용수명식을 도출하였다. 도출된 사용수명식으로부터 바이오디젤이 가장 빠르게 산화가 진행되었고 바이오디젤 혼합량이 증가할수록 사용수명이 단축되는 것을 확인할 수 있었다.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.14 no.1
• /
• pp.83-87
• /
• 2008

We have a lot of interest in alternative fuels to provide energy independence from oil producing country and to reduce exhaust emissions for air pollution prevention. Biodiesel, which can be generated from natural renewable sources such as new or used vegetable oils or animal fats, may be used as fuel without change of engine structure in diesel engine of compression ignition engine. In this paper, the test results on specific fuel consumption and exhaust emissions of neat diesel oil and biodiesel blends(10 vol.% biodiesel and 20 vol.% biodiesel) were presented using four stroke, direct injection diesel engine. Especially this biodisel was produced from rape oil at our laboratory by ourselves. This study showed that specific fuel consumption and NOx emission were slightly increased, on the other hand CO emission and Soot were tolerably decreased more in the case of biodiesel blends than neat diesel oil.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.4
• /
• pp.381-386
• /
• 2015

Environmental pollution and alternative energy has attracted increasing interest. The use of diesel engines is expected to increase in the world owing to their fuel economy. The problem of air pollution emissions from marine engines is causing a major concern in many areas. An alternative fuel was introduced as an environmentally friendly fuel to reduce the toxic emissions from conventional fossil fuels. Biodiesel fuel, which is a renewable energy is highlighted as environmentally friendly energy. This energy can be operated in regular diesel engines when it is blended with invariable ratios without making changes. In this study, a bio-diesel fuel was produced from waste cooking oil and applied to a marine diesel engine to examine the effects on the characteristics of combustion. Waste cooking oil contains a high cetane number and viscosity component, a low carbon and oxygen content. As a result, the brake specific fuel consumption was increased, and the cylinder pressure, rate pressure rise and rate of heat release were decreased.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.6
• /
• pp.681-687
• /
• 2014

The objective of this work presented here was focused on analysis of in-cylinder combustion characteristic, engine performance, and nitrogen oxides emission characteristic from marine gas oil for propulsion diesel engine of naval vessels and biodiesel with fuel injection timing in a single cylinder diesel engine. In addition, combustion process was analyzed with a high speed camera of marine gas oil and biodiesel fuel. Retarding the fuel injection timing from $BTDC25^{\circ}CA$ to $BTDC5^{\circ}CA$, in cylinder peak combustion pressure was gradually decreased, however, engine torque showed a tendency to increase. The highest nitrogen oxides level was measured at $BTDC15^{\circ}CA$, they were reduced at retarded and advanced condition on the basis of $BTDC15^{\circ}CA$. Comparing with combustion process of marine gas oil and biodiesel fuel at $BTDC5^{\circ}CA$, self-ignition timing of biodiesel fuel included oxygen content was faster than marine gas oil, however, a cautious observation indicates a slightly higher flame intensity for marin gas oil than biodiesel as a diffusion flame is developing.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.11a
• /
• pp.533-536
• /
• 2006

재생 가능한 자원인 동 식물성 기름으로부터 제조되는 수소용 연료 바이오디젤은 낮은 대기오염 배출과 $CO_2$ Neutral 특성으로 환경 친화적인 연료로 인정을 받으며 전 세계적으로 그 생산량이 급격히 증가하고 있다. 바이오디젤 생산 기술에는 직접이용법, 마이크로 에멀젼법, 열분해법, 에스테르화법, 초임계 메탄올 이용 생산법 등이 있으며 현재의 대부분의 상용 공정은 전이에스테르화법에 근거하고 있다. 이 공정은 크게 나누어 원료 유지 물질의 전처리 단계, 촉매를 사용하여 알콜과 에스테르화시키는 단계, 그리고 생성된 바이오디젤/글리세린의 분리와 정제 단계로 이루어지며 각 단계의 세부기술은 바이오디젤 생산비에 직접적인 영향을 미친다. 본 연구에서는 대두 원유의 전처리 반응, 전처리된 대두원유의 전이에스테르화 반응, 그리고 분리 및 정제 공정의 운전 변수들의 영향에 대한 연구결과와 본 연구를 통해 확립된 생산 공정으로 생산한 연료 grade의 바이오디젤 연료 물성 평가하였다.

• Fire Science and Engineering
• /
• v.22 no.5
• /
• pp.79-82
• /
• 2008

Biodiesel is manufactured from vegetable oils, etc. in reaction with methanol so that the product of biodiesel may be dangerous due to the methanol remained of it. The risks of methanol remained in biodiesel were studied by measuring flash points and dynamic viscosity to some samples of biodiesel by adding methanol to a certain percentage of. The results of flash points of biodiesel are decreased in accordance with increasing of methanol in biodiesel and also decreasing the dynamic viscosity. It was shown that the risks of explosion of biodiesel are significantly high due to lower flash points resulted from methanol remained in biodiesel fuel as a reactant or adding to biodiesel for reduction of viscosity.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.9
• /
• pp.1081-1086
• /
• 2014

An experimental study was performed in order to compare with the case of using pure diesel the characteristics of combustion pressure and exhaust emissions when the engine speed was changed in a CRDI 4-cylinder diesel engine using biodiesel( Canola oil) blended and pure diesel fuel. As a results, the combustion pressure was decreased with increasing biodiesel blended rate when engine speed was 1,000, 1,500, 2000(rpm). but the combustion pressure of the engine speed 2,500rpm was increased with increasing biodiesel blended rate. The emission results show, that CO was decreased with increasing biodiesel blended rate and engine speed. The emission of $CO_2$, NOx, were increased with increasing biodiesel blended rate and engine speed.

• Applied Biological Chemistry
• /
• v.50 no.3
• /
• pp.137-146
• /
• 2007

The substitution of fossil fuels with biofuels has been proposed by the European Union (EU) as part of a strategy to mitigate greenhouse gas emissions from road transport, increase security of energy supply and support the development of rural communities. Vegetable oils and their derivatives (especially methyl esters), commonly referred to as 'biodiesel', are prominent candidates as alternative diesel fuels. They have advanced from being purely experimental fuels to the initial stages of commercialization. They are technically competitive with or offer technical advantages compared to conventional diesel fuel. However, several problems remain including economics, combustions, some emissions, lube oil contamination, and low-temperature properties. Therefore, quality control of fuel-related properties of biodiesel is needed to obtain consistent engine performance by fuel users. The quality of the fuel is affected by the oil composition. Rapeseed oil has been targeted for fuel use because it produces an oil with a close-to-optimum set of fuel characteristics. In this paper we have reviewed past and current efforts, both by traditional seed-breeding methods and by genetic engineering, to modify rapeseed oil quality and yield.